Torture Tests in 3D Printing: Are They Still Relevant?
- Volume rate
- mm^3/min
- Result
- Print time
- 120 min
- You entered
- Model size
- 50 mm
- You entered
Torture tests were once the standard way to evaluate a 3D printer’s capability, but they are no longer the primary measure of quality. Today, they serve as a useful diagnostic tool for specific issues, not a universal benchmark. This article explains what torture tests are, why they became popular, how they work, and where they fit in modern 3D printing.
Formula
The calculator above estimates the average print speed and volumetric flow rate based on print time and model size. The formula for average speed is:
Average speed (mm/min) = Model size (mm) / (Print time (min) / 60)
Where:
- Model size (d) – the largest dimension of the printed object in millimeters.
- Print time (t) – total time in minutes.
- Average speed – how fast the nozzle moves, on average, in mm per minute.
- Volume rate – estimated material deposited per minute, assuming a cubic model, in cubic millimeters per minute.
Worked Example
Using the default values: print time = 120 minutes, model size = 50 mm.
- Convert print time to hours: 120 min / 60 = 2 hours (not needed for the formula, but useful).
- Calculate average speed: 50 mm / (120 / 60) = 50 / 2 = 25 mm/min.
- Calculate volume rate: (50^3) / (120 / 60) = 125,000 / 2 = 62,500 mm³/min.
The calculator shows 25 mm/min and 62,500 mm³/min for these defaults.
What Are Torture Tests in 3D Printing?
A torture test is a deliberately challenging print designed to stress specific aspects of a printer. Common examples include the “Benchy” boat, the “3D Benchy” (a small tugboat), overhang tests, bridging tests, and calibration cubes. These models push the limits of layer adhesion, cooling, retraction, and dimensional accuracy. They became popular because they provide a quick, visual way to compare printers or settings. For instance, a Benchy with drooping overhangs indicates insufficient cooling, while stringing between parts suggests poor retraction settings.
Why Were They So Popular?
In the early days of consumer 3D printing, machines were finicky and required constant tuning. Torture tests offered a standardized method to see if a printer was working correctly. Enthusiasts would print the same model on different machines and share photos in forums, creating a de facto benchmark. The appeal was simplicity: you didn’t need expensive equipment to judge quality – just look at the print. This community-driven testing helped manufacturers improve their designs and users learn to calibrate their machines.
How Do Torture Tests Work?
Torture tests typically include features that fail visibly if a printer is not well-tuned. For example:
- Overhangs – angles beyond 45° test cooling and layer adhesion.
- Bridges – horizontal spans test cooling and extrusion consistency.
- Retraction towers – small pins test filament retraction to prevent stringing.
- Dimensional accuracy – precise holes and slots test motion system accuracy.
- Surface finish – curved surfaces reveal layer inconsistencies.
By examining the printed result, you can identify specific weaknesses. For instance, if a bridge sags, the part cooling fan is likely insufficient or the print speed is too high.
How to Choose a Torture Test
Not all torture tests are equal. Choose based on what you want to evaluate:
- Benchy – all-around test for cooling, overhangs, and dimensional accuracy.
- Calibration cube – checks dimensional accuracy and extrusion multiplier.
- Overhang test – a series of angled planes from 30° to 70°.
- Bridging test – multiple gaps of increasing length.
- Retraction test – two vertical towers with a small gap.
For a new printer, start with a Benchy. For fine-tuning a specific issue, use a targeted test. Remember that a single test cannot cover everything – you may need several.
Common Problems and Misconceptions
One common misconception is that a perfect torture test means the printer is flawless. In reality, torture tests are often printed at settings that favor success, such as low speed or extra cooling. They might not reflect real-world printing where you use different materials or layer heights. Another issue is that torture tests can be misleading if the model is not sliced correctly – for example, if the layer height is too small, it may hide problems. Also, many users over-rely on a single test, ignoring that different materials (PLA vs. ABS) behave differently.
Another problem is that torture tests are time-consuming. A Benchy takes about 1-2 hours, and printing multiple tests can eat up a day. For a beginner, this can be frustrating. However, the information gained is valuable for learning your printer’s strengths and weaknesses.
Alternatives to Torture Tests
Modern printers are more reliable out of the box, so torture tests are less critical. Alternatives include:
- Calibration prints – small, quick models that test one variable, like a 20mm cube.
- Software calibration – using tools like a filament flow calculator or PID tuning to adjust settings without printing.
- Diagnostic tools – using a webcam to monitor the first layer and adjust live.
- Community profiles – using pre-tuned settings from manufacturers or forums for your specific printer and filament.
These methods are faster and often more precise than a torture test. However, torture tests still have a place when you suspect a hardware issue that isn’t obvious.
Costs and Safety Considerations
Torture tests themselves are free – they are just STL files. The cost comes in filament and time. A Benchy uses about 10-15 grams of filament, which is negligible. However, if you print many tests, the cost adds up. Safety-wise, 3D printing involves hot parts (nozzle, bed) and moving parts. Always supervise prints, especially when testing new settings. Use a printer with thermal runaway protection and place it away from flammable materials. Also, some filaments like ABS emit fumes – ensure proper ventilation.
Frequently Asked Questions
Do I need to print a torture test for every new filament?
Not necessarily. If the filament is from a reputable brand and you use a similar profile, you can skip it. But for a new material type (e.g., switching from PLA to PETG), a quick test like a Benchy is wise to check adhesion and temperature settings.
What does a failed overhang tell me?
A drooping overhang indicates insufficient cooling or too high a print temperature. Increase the part cooling fan speed or lower the nozzle temperature by 5-10°C. Also, reduce print speed for overhangs.
How long does a typical torture test take?
A Benchy at standard settings takes about 1-2 hours. Smaller tests like a 20mm cube take 15-30 minutes. The time depends on layer height and speed.
Can I use a torture test to compare two printers?
Yes, but only if you use the same filament, slicer settings, and environmental conditions. Even then, subtle differences in calibration can affect results. It’s better to compare prints from the same printer before and after changes.
Are torture tests still useful for professional printing?
Professionals often use more quantitative methods like measuring with calipers or using a 3D scanner. Torture tests are more qualitative, but they can still be used as a quick visual check before a large production run.
Related
Formula used
in t | Print time | min | 120 | 0 in d | Model size | mm | 50 | 0 out speed | Average speed | mm/min | d / (t / 60) | 2 out vol | Volume rate | mm^3/min | (d^3) / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.