ThisCalculator

Everyday

Smart Thermostats: Do They Really Save Money?

Updated · Standard formula, shown below

Temperature difference 4.0 °F
Energy saving factor
20.0 %
Result
Current temperature
72 °F
You entered
Setpoint temperature
68 °F
You entered

Smart thermostats can save money on heating and cooling, but the amount varies widely—often 8–15% on heating and 10–15% on cooling bills, according to industry estimates. Whether you see those savings depends on your home, your habits, and how you use the device.

Formula

The energy saving factor is a simplified estimate based on the temperature setback. For every 1°F you lower the thermostat during heating season (or raise it during cooling season) for 8 hours, you can save about 1% on your heating or cooling bill. The formula is:

Saving (%) = (Temperature Difference / 20) × 100

Where:

  • Temperature Difference = Current temperature – Setpoint temperature (in °F)
  • 20 = A typical 20°F difference between indoor and outdoor temps during extreme weather
  • Saving (%) = Estimated percent reduction in heating/cooling energy use

Worked Example

Using the defaults: Current temperature = 72°F, Setpoint = 68°F, Hours = 8.

Temperature Difference = 72 – 68 = 4°F

Saving = (4 / 20) × 100 = 20%

So if you lower your thermostat from 72°F to 68°F for 8 hours a day, you could cut heating energy use by about 20% during that period. This matches the calculator output.

How Smart Thermostats Work

Smart thermostats connect to your HVAC system and Wi-Fi. They learn your schedule, detect when you’re away (via geofencing or motion sensors), and let you control temperature remotely through an app. Some models use occupancy sensors to automatically switch to an energy-saving mode when no one is home. They also provide energy reports showing how much you used compared to previous periods.

Unlike programmable thermostats, which require manual scheduling, smart models adjust automatically based on your routines. For example, if you leave for work at 8 AM, the thermostat can start lowering the temperature at 7:30 AM so the house is cool by the time you leave, and warm up again before you return.

Real-World Savings: What the Numbers Show

Studies by the U.S. Environmental Protection Agency (EPA) and utility companies suggest that programmable thermostats can save about 10% on heating and cooling bills if used correctly. Smart thermostats, with their automation and learning features, can achieve similar or slightly better results—but only if you actually let them work.

A common misconception is that simply installing a smart thermostat guarantees savings. In reality, the savings come from the temperature setbacks, not the device itself. If you set it to keep your home at 72°F all day, you’ll save nothing compared to a manual thermostat set the same way.

According to a 2015 study by the Lawrence Berkeley National Laboratory, the average savings from smart thermostats in real homes was about 10–15% on heating and 15% on cooling, but the range was huge—some households saved nothing, while others saved over 25%. The key factors were how much the household already used setbacks and how consistently the smart features were used.

Factors That Affect Your Savings

  • Climate: Homes in extreme climates (very cold or very hot) benefit more from setbacks because the temperature difference between inside and outside is larger.
  • Home size and insulation: Well-insulated homes hold temperature longer, so setbacks can be longer without discomfort. Poorly insulated homes lose heat quickly, so savings may be lower.
  • HVAC system efficiency: Older, less efficient systems may not respond as well to setbacks, and some heat pumps need special settings to avoid running auxiliary heat.
  • Your schedule: If you’re home most of the day, you have fewer opportunities for setbacks. But even a few hours at night can help.
  • Occupancy detection: If the thermostat can’t tell you’re away (e.g., you have pets that trigger sensors), it may not switch to eco mode.

Common Mistakes That Kill Savings

Many people install a smart thermostat and then undermine its efficiency without realizing it:

  • Setting it too aggressively: Dropping the temperature 10°F or more can cause your system to struggle to recover, using extra energy. A 5–8°F setback is more realistic.
  • Ignoring the schedule: If you override the eco mode constantly, you lose the benefits. Let the thermostat learn for a week or two before adjusting.
  • Forgetting about heat pumps: Heat pumps work differently. Setting a large setback can cause the auxiliary electric resistance heat to kick in, which is expensive. Use the “heat pump” setting if available.
  • Not using geofencing: If you have a smartphone, enable geofencing so the thermostat knows when you’re away. Without it, it relies on motion sensors which may not detect you if you’re still in the house.

Smart Thermostat vs. Programmable vs. Manual

Manual thermostats are simple and cheap, but they require you to remember to adjust them. Programmable thermostats let you set schedules, but many people never program them correctly—one study found that 29% of households with programmable thermostats left them in permanent hold mode, defeating the purpose.

Smart thermostats remove the need for manual programming. They learn your habits and adjust automatically. They also offer remote control, so you can change the temperature from bed or from work. However, they cost more upfront—typically $100–$250, plus installation if you don’t do it yourself.

The payback period depends on your energy bills. If you save $150 a year, a $200 thermostat pays for itself in about 16 months. If you save only $50, it takes 4 years. In mild climates, the payback may be longer than the device’s lifespan.

Choosing the Right Smart Thermostat

Not all smart thermostats are the same. Consider these factors:

  • Compatibility: Check if your HVAC system is compatible. Some systems (like certain heat pumps or electric baseboard heating) need special models.
  • Whether you need a C-wire: Many smart thermostats require a common wire for power. If your system doesn’t have one, you may need an adapter or a model that works without it.
  • Features: Do you want geofencing, voice assistant integration, energy reports, or remote sensors? More features usually mean higher cost.
  • Learning vs. simple: Some models learn your schedule automatically; others let you set a fixed schedule. If you have a regular routine, a simpler model may suffice.

Frequently Asked Questions

Do smart thermostats really save money?

Yes, but only if you use the setback features. The average savings are around 10–15% on heating and cooling, but homes that already used setbacks regularly may see less. The thermostat itself doesn’t save energy—the temperature adjustments do.

How long does it take for a smart thermostat to pay for itself?

It depends on your energy costs and usage. If you save $100–$150 per year, a $200 thermostat pays for itself in 1.5–2 years. In milder climates, savings may be lower, extending the payback period.

Can a smart thermostat save money on electric baseboard heating?

Most smart thermostats are designed for central HVAC systems. For electric baseboard heating, you need line-voltage thermostats, which are a different type. Some smart line-voltage models exist, but they are less common.

Is it better to turn the thermostat off when away?

No. Turning it off completely can cause the house to get too hot or too cold, and the system will have to work hard to recover. A setback of 5–8°F is more efficient and prevents issues like frozen pipes in winter.

Do smart thermostats work with heat pumps?

Yes, but you need to configure them properly. Heat pumps should not be set back more than a few degrees, as the auxiliary heat can kick in and negate savings. Look for a model with “heat pump” settings.

Will a smart thermostat save money if I have solar panels?

It can help you use more of your own solar energy by timing heating/cooling to when your panels produce the most power. Some smart thermostats can integrate with solar systems to optimize usage, but the savings depend on your net metering rules.

Related

Formula used
in t | Current temperature | °F | 72 | 0
in set | Setpoint temperature | °F | 68 | 0
in h | Hours per day | h | 8 | 0
out diff | Temperature difference | °F | t - set | 1
out energy_saving | Energy saving factor | % | (diff / 20) * 100 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.