Molarity of Water: Pure H2O Concentration
- Density of water
- kg/m³
- Result
- Temperature
- 25 °C
- You entered
Pure water at 25 °C has a molarity of approximately 55.5 mol/L. This article explains how that number is derived, why it matters in chemistry, and how it changes with temperature.
Formula
The molarity (M) of a pure substance is the amount of substance (in moles) divided by the volume of the solution (in liters). For pure water, the formula is:
M = (ρ × 1000) / Mw
- M = molarity of water (mol/L)
- ρ = density of water at the given temperature (g/cm³ or g/mL)
- Mw = molar mass of water = 18.015 g/mol
The factor 1000 converts g/cm³ to g/L. At 25 °C, ρ = 0.99705 g/cm³, so M = (0.99705 × 1000) / 18.015 = 55.34 mol/L. Many textbooks round this to 55.5 M.
Worked Example
Using the default values from the calculator (T = 25 °C):
- Density of water at 25 °C = 0.99705 g/cm³.
- Convert to g/L: 0.99705 × 1000 = 997.05 g/L.
- Divide by molar mass: 997.05 / 18.015 = 55.34 mol/L.
The calculator returns 55.34 mol/L (rounded to two decimals). This matches the standard value found in chemistry references.
Why 55.5 M Matters
Water is not just a solvent; it is also a reactant in many reactions. For example, in acid‑base equilibria, the concentration of water is often assumed constant and incorporated into equilibrium constants (like Kw). Knowing the molarity of pure water lets you calculate the number of water molecules in a given volume: 1 L contains 55.5 mol × 6.022×10²³ molecules/mol ≈ 3.34×10²⁵ molecules.
This value also helps in understanding colligative properties, osmotic pressure, and reaction stoichiometry where water is a product or reactant.
How Temperature Affects Molarity
Water expands when heated, so its density decreases. As temperature rises, the molarity drops slightly:
- 0 °C: density = 0.99984 g/cm³ → M = 55.51 mol/L
- 25 °C: density = 0.99705 g/cm³ → M = 55.34 mol/L
- 100 °C: density = 0.9584 g/cm³ → M = 53.20 mol/L
For most laboratory calculations, the change is small (less than 1% between 0 and 25 °C), but it becomes significant at high temperatures or when precise measurements are needed.
Common Mistakes and Misconceptions
- Using the density of ice – ice has a lower density (0.9167 g/cm³) and a different molarity; the formula applies to liquid water only.
- Confusing molarity with molality – molality is moles per kilogram of solvent, not per liter of solution. For pure water, molality is undefined because there is no solvent separate from solute.
- Ignoring temperature – molarity is temperature‑dependent because volume changes. Always note the temperature when reporting molarity.
- Rounding too early – using 1.00 g/mL for density gives 55.51 M, which is fine for rough work but off by 0.3% from the true value at 25 °C.
Comparisons: Molarity of Water vs. Other Solvents
Water has a relatively high molarity because its molecules are small and closely packed. Compare with common solvents:
- Ethanol (C₂H₅OH): density 0.789 g/cm³, molar mass 46.07 g/mol → 17.1 M
- Acetone (C₃H₆O): density 0.784 g/cm³, molar mass 58.08 g/mol → 13.5 M
- Hexane (C₆H₁₄): density 0.655 g/cm³, molar mass 86.18 g/mol → 7.6 M
This high molarity means that in dilute aqueous solutions, water molecules vastly outnumber solute particles, justifying the common assumption that water concentration is constant.
Limits of the Formula
The formula M = (ρ × 1000) / Mw assumes pure water. In real solutions, the density changes with solute concentration, and the molarity of water itself decreases as solute occupies volume. For seawater (salinity ~35 g/L), the molarity of water drops to about 53.6 M. The formula also fails for heavy water (D₂O) because its molar mass is 20.03 g/mol, giving a molarity of about 49.8 M at 25 °C.
Frequently Asked Questions
Why is the molarity of water often given as 55.5 M?
That is a convenient rounded value using 1.00 g/mL density and 18.0 g/mol molar mass. The precise value at 25 °C is 55.34 M, but 55.5 is close enough for most textbook problems and is easier to remember.
Is the molarity of water the same in any solution?
No. In a solution, the molarity of water is the amount of water divided by the total solution volume. Adding solute reduces the water concentration. For example, in a 1 M NaCl solution, the water molarity is about 54.3 M, not 55.5 M.
How do I calculate the molarity of water in a solution?
You need the mass of water and the total volume of the solution. Convert mass of water to moles (divide by 18.015), then divide by the total solution volume in liters. For dilute solutions, it is close to 55.5 M, but for concentrated solutions, it can be significantly lower.
Does the molarity of water change with pressure?
Yes, but the effect is small. Water is nearly incompressible; a pressure increase of 100 atm changes density by less than 0.5%. At typical laboratory conditions, pressure effects are negligible.
Why is water concentration not included in equilibrium expressions?
In dilute aqueous solutions, the water molarity is essentially constant (≈55.5 M). Constants like Ka and Kw incorporate this constant into the equilibrium constant, simplifying calculations. This assumption breaks down in very concentrated solutions or non‑aqueous solvents.
Related
Formula used
in t | Temperature | °C | 25 | 0 out molarity | Molarity of water | mol/L | (997.05 / 18.015) | 2 out density | Density of water | kg/m³ | 997.05 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.