Convert Bar to Feet of Water
- Meters of water
- m
- Result
- Pressure
- 1 bar
- You entered
This calculator converts a pressure reading in bar to the equivalent height of a water column in feet, assuming standard gravity and water density. Enter the pressure in bar, and you get the water column height in feet, along with the value in meters for reference.
Formula
The conversion is based on the hydrostatic pressure equation:
P = ρ × g × h
Rearranged for height:
h = P / (ρ × g)
- P = pressure (pascal, Pa)
- ρ = density of water (kg/m³), taken as 999.9720 kg/m³ at 4 °C (maximum density)
- g = standard gravity, 9.80665 m/s²
- h = height of water column (meters)
Since 1 bar = 100,000 Pa, the height in meters is:
h (m) = 100,000 / (999.9720 × 9.80665) × pressure (bar)
This equals 10.19716213 meters per bar. Converting meters to feet (1 m = 3.280839895 ft) gives:
1 bar = 33.45525633 feet of water
So the calculator uses the factor 334.552563312 (which is 33.45525633 × 10) for the pressure in bar to get feet directly.
Worked Example
Using the default value of 1 bar:
- Start with pressure = 1 bar
- Convert to pascals: 1 bar = 100,000 Pa
- Compute height in meters: 100,000 / (999.9720 × 9.80665) = 10.19716213 m
- Convert to feet: 10.19716213 × 3.280839895 = 33.45525633 ft
The calculator shows 33.46 ft (rounded to two decimals) and 10.20 m.
Why Use Feet of Water?
Feet of water (ftH₂O) is a unit of pressure commonly used in the United States for measuring low-pressure differences in water systems, such as pump discharge head, water tower levels, and HVAC static pressure. It is also used in scuba diving and hydraulics. Using a water column height makes it intuitive to visualize pressure as the height of a water column that would produce that pressure at its base.
The conversion factor is not a simple round number because it depends on the density of water and gravity, both of which vary slightly with temperature, altitude, and location. The standard values used here (4 °C water, standard gravity) are widely accepted for engineering calculations.
How to Read the Result
The result tells you: if you had a vertical column of water with no flow, the pressure at the bottom would equal the given bar value when the water height is that many feet. For example, 2 bar corresponds to about 66.91 ft of water. This is useful when sizing pumps: a pump rated for a certain head (in feet) can lift water to that height, and you can convert that head to bar to compare with pressure gauges.
Remember that this is a theoretical value for fresh water at 4 °C. Seawater is denser (about 1025 kg/m³), so the same pressure would produce a slightly shorter column (about 32.6 ft per bar). Hot water is less dense, so the column would be slightly taller.
Common Mistakes and Misconceptions
- Confusing bar with barg: Bar is absolute pressure (including atmospheric), while barg (bar gauge) is pressure above atmospheric. Always check which one your gauge reads. For gauge pressure, the conversion is the same, but the reference point differs.
- Using the wrong density: Some sources use 1000 kg/m³ for water, which gives 10.197 m per bar (close but not exact). The difference is about 0.02%, negligible for most purposes but important for precise work.
- Forgetting gravity: The standard gravity value is 9.80665 m/s². On the Moon, the column would be about six times taller, but for Earth applications, the standard value is fine.
- Rounding too early: If you round the factor to 33.45 ft per bar, you lose precision. Use the full factor or the calculator for exact conversions.
When to Use This Conversion
Use this conversion when you need to communicate pressure in terms of water column height, which is common in:
- Pump head calculations (e.g., a pump with 50 ft head produces about 1.49 bar)
- Water tank and tower design (height of water determines pressure)
- Diving and underwater pressure (every 33 ft of seawater adds about 1 atm, which is 1.013 bar)
- HVAC systems where static pressure is measured in inches of water (1 ft = 12 in)
If you are working with inches of water, simply multiply the feet value by 12. For example, 1 bar = 401.46 inches of water.
Limitations and Accuracy
The conversion assumes pure fresh water at 4 °C and standard gravity. In real applications, water temperature and dissolved minerals change density slightly. For drinking water at room temperature (20 °C), density is about 998.2 kg/m³, which changes the factor to about 33.42 ft per bar – a difference of 0.1%. For most engineering purposes, the standard factor is accurate enough. If you need extreme precision, use the actual water density for your conditions.
Also note that this is a static conversion – it does not account for friction losses in pipes or dynamic effects. Pump head calculations often add friction losses on top of the static head.
Frequently Asked Questions
How many feet of water are in one bar?
One bar is equal to 33.45525633 feet of water (ftH₂O) at 4 °C and standard gravity. For quick estimates, you can use 33.45 ft per bar, but for precise calculations use the full factor.
Is the conversion different for seawater?
Yes. Seawater has a higher density (about 1025 kg/m³), so the same pressure corresponds to a shorter column. One bar of pressure would produce about 32.6 feet of seawater, depending on salinity and temperature. For diving calculations, the rule of thumb is 33 feet of seawater per atmosphere (1.013 bar), which gives about 32.6 ft per bar.
What is the difference between bar and barg?
Bar is absolute pressure, measured relative to a perfect vacuum. Barg (bar gauge) is pressure measured relative to atmospheric pressure. A tire gauge reading 2 barg means the pressure is 2 bar above atmospheric, which is about 3 bar absolute. The conversion to feet of water is the same for both, but you must be clear which pressure you are converting.
How do I convert feet of water to bar?
Divide the feet of water by 33.45525633 to get bar. For example, 100 ft of water divided by 33.45525633 equals 2.99 bar. You can also use the inverse factor: 1 ft of water = 0.02989 bar.
Why is the factor not a round number?
Because it depends on the density of water and the acceleration due to gravity, both of which are physical constants with non-round values. The factor 33.45525633 comes from the exact definitions of bar (100,000 Pa), standard gravity (9.80665 m/s²), and the maximum density of water (999.9720 kg/m³).
Related
Formula used
in p | Pressure | bar | 1 | 0 out ft | Feet of water | ft | p * 334.552563312 | 2 out m | Meters of water | m | p * 10.19716213 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.