Mb to Barometric Pressure Conversion Table
- Pounds per square inch (psi)
- psi
- Result
- Pascals (Pa)
- Pa
- Result
- Pressure (millibars)
- 1013.25 mb
- You entered
This calculator converts millibars (mb) to barometric pressure in inches of mercury (inHg), pounds per square inch (psi), and pascals (Pa). You enter the pressure in millibars, and the calculator returns the equivalent values in the other common pressure units used in weather reporting and engineering.
Formula
The conversion between millibars and other pressure units is based on fixed definitions. The formulas used are:
- inHg = mb × 0.0295299830714
- psi = mb × 0.014503773773
- Pa = mb × 100
Where mb is the pressure in millibars, inHg is inches of mercury, psi is pounds per square inch, and Pa is pascals. The millibar is defined as exactly 100 pascals, so the pascal conversion is exact. The other factors come from the definitions of standard gravity and the density of mercury.
Worked Example
Using the default value of 1013.25 mb (standard sea-level pressure):
- Convert to inHg: 1013.25 × 0.0295299830714 = 29.92 inHg
- Convert to psi: 1013.25 × 0.014503773773 = 14.70 psi
- Convert to Pa: 1013.25 × 100 = 101,325 Pa
These match the standard atmospheric pressure values you will see in textbooks: 29.92 inHg, 14.70 psi, and 101,325 Pa.
Why Millibars Are Used in Weather
Meteorologists use millibars (or the equivalent hectopascals, hPa) because they are a convenient size for atmospheric pressure. Sea-level pressure typically ranges from about 950 mb (deep hurricane) to 1050 mb (strong high-pressure system). A change of 1 mb is roughly the pressure change you experience when moving up or down about 8–10 meters in elevation, making it a practical unit for tracking weather systems.
In the United States, weather reports often use inches of mercury, while most of the world uses hectopascals or millibars. Since 1 hPa = 1 mb, the numbers are identical, which is why you may see both terms used interchangeably in weather data.
How to Read the Conversion Table
If you have a pressure reading in millibars, you can find its equivalent in inHg, psi, or Pa using the formulas above. For example:
- 1000 mb = 29.53 inHg = 14.50 psi = 100,000 Pa
- 1013.25 mb = 29.92 inHg = 14.70 psi = 101,325 Pa
- 1050 mb = 31.01 inHg = 15.23 psi = 105,000 Pa
- 950 mb = 28.05 inHg = 13.78 psi = 95,000 Pa
These values are rounded to two decimal places for inHg and psi, and to the nearest whole pascal.
Common Mistakes and Misconceptions
A frequent error is confusing millibars with hectopascals. They are numerically equal, so no conversion is needed. Another mistake is using the wrong conversion factor for inHg: some sources give 0.02953, which is a rounded version of the exact factor 0.0295299830714. Using the rounded factor introduces a small error of about 0.01 inHg per 1000 mb, which is usually negligible for weather purposes but can matter in precise calibration.
Also, be careful with units: psi is pounds per square inch, not pounds per square foot. If you see a pressure in psf, divide by 144 to get psi before comparing.
Practical Applications
This conversion is useful in several fields:
- Aviation: Pilots receive altimeter settings in inHg or hectopascals, depending on the region.
- Scuba diving: Tank pressures are often measured in psi, while weather forecasts use mb.
- HVAC and engineering: Duct pressures may be in pascals or inches of water column, which can be converted from mb using the same principles.
- Weather enthusiasts: Comparing local barometer readings with international reports requires converting between mb and inHg.
Limits of the Conversion
The conversion factors are constant and do not depend on temperature, altitude, or humidity. However, the measured barometric pressure at a location is often corrected to sea level for weather reports. If you are converting a raw station pressure, you may need to apply an elevation correction first. The formulas above convert the numeric value only; they do not adjust for altitude.
Frequently Asked Questions
What is the difference between mb and hPa?
None. One millibar equals one hectopascal exactly. The units are used interchangeably in meteorology; hPa is the official SI-derived unit, while mb is the older name that is still common in North America.
How do I convert inHg to mb?
Use the inverse of the formula: mb = inHg / 0.0295299830714. For example, 29.92 inHg divided by 0.0295299830714 gives 1013.25 mb.
Why is standard sea-level pressure 1013.25 mb?
This value was defined by international agreement as the standard atmosphere. It corresponds to 101,325 Pa, which is the average pressure at sea level on Earth. It is not a measured average of all oceans, but a defined reference value.
Is 1000 mb considered high or low pressure?
It is near average. Sea-level pressure typically ranges from about 980 mb (stormy) to 1040 mb (fair weather). A reading of 1000 mb is slightly below the standard 1013.25 mb, often indicating unsettled weather.
Can I use this conversion for vacuum pressures?
Yes, but be careful with sign. Vacuum pressures are often given as negative gauge pressure or as absolute pressure. The formulas above convert absolute pressure. If you have a gauge reading (relative to atmosphere), add the ambient atmospheric pressure first.
What is the most accurate conversion factor for mb to inHg?
The exact factor is 0.0295299830714, derived from the definition of the inch (2.54 cm) and standard gravity. Using more digits than this is unnecessary because the millibar itself is defined to a limited precision (100 Pa exactly).
Related
Formula used
in mb | Pressure (millibars) | mb | 1013.25 | 0 out inhg | Inches of mercury (inHg) | inHg | mb * 0.0295299830714 | 2 out psi | Pounds per square inch (psi) | psi | mb * 0.014503773773 | 2 out pa | Pascals (Pa) | Pa | mb * 100 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.