Molarity Practice Questions: Formula & Examples
- Moles for 1 L
- mol
- Result
- Moles of solute
- 0.5 mol
- You entered
- Volume of solution
- 1 L
- You entered
Molarity practice questions ask you to calculate the concentration of a solution in moles of solute per liter of solution. To answer them, you use the formula M = n / V, where M is molarity (mol/L), n is moles of solute, and V is volume in liters. Below is a free calculator that works out molarity, moles, or volume from the other two values, followed by a full explanation, worked examples, and common pitfalls.
Formula
The molarity (M) of a solution is defined as the number of moles of solute dissolved in exactly one liter of solution:
M = n / V
- M = molarity, in moles per liter (mol/L), often written as M
- n = amount of solute, in moles (mol)
- V = total volume of the solution, in liters (L)
Notice that the volume is the final solution volume, not the volume of solvent added. When you dissolve a solid in water, the final volume can be slightly different from the sum of solute and solvent volumes.
Worked Example
Using the calculator defaults: you have 0.5 mol of sodium chloride (NaCl) and you dissolve it in enough water to make 1.00 L of solution.
- Write down the formula: M = n / V
- Plug in the values: M = 0.5 mol / 1.00 L
- Divide: M = 0.5 mol/L
The molarity is 0.50 M (two significant figures). The calculator shows 0.50 mol/L as the headline answer.
How to Solve Molarity Problems Step by Step
Most practice questions fall into one of a few patterns. Here is a general approach that works for all of them:
- Convert mass to moles if you are given grams. Use the molar mass from the periodic table: moles = mass (g) ÷ molar mass (g/mol).
- Convert volume to liters if it is given in mL or another unit. 1 L = 1000 mL.
- Apply the formula M = n / V.
- Check units – molarity must be mol/L, not mol/mL.
- Round to the correct number of significant figures based on the given data.
For example, if a question gives 5.85 g of NaCl (molar mass 58.5 g/mol) in 250 mL of solution, first find moles: 5.85 ÷ 58.5 = 0.100 mol. Then convert volume: 250 mL = 0.250 L. Finally, M = 0.100 / 0.250 = 0.400 M.
Common Variations in Practice Questions
Textbook problems often ask for something other than molarity directly. Here are the typical variations and how to handle them:
- Find moles from molarity and volume: n = M × V. For example, 2.0 L of 0.5 M solution contains 1.0 mol of solute.
- Find volume from moles and molarity: V = n / M. For example, to get 0.25 mol from a 2.0 M solution, you need 0.125 L (125 mL).
- Find mass from molarity, volume, and molar mass: mass = M × V × molar mass. This combines two steps.
- Dilution problems: M₁V₁ = M₂V₂ (where M₁ and V₁ are the concentrated stock solution, and M₂ and V₂ are the diluted solution). This works because moles are conserved during dilution.
- Solution preparation: Calculate the mass of solid needed to make a given volume of a specific molarity, then describe how to dissolve it in a volumetric flask.
Common Mistakes and How to Avoid Them
Even advanced students slip up on these points:
- Using mL without converting: Molarity requires liters. If you plug in milliliters directly, your answer will be 1000 times too large.
- Confusing solute and solution: The volume in the denominator is the final solution volume, not the solvent volume. When you add a solid, the volume changes slightly.
- Forgetting molar mass: To convert grams to moles, you must use the molar mass. For hydrated salts (like CuSO₄·5H₂O), include the water of hydration in the molar mass.
- Rounding too early: Keep extra digits during intermediate steps, then round at the end.
- Ignoring significant figures: The final answer should have the same number of significant figures as the least precise measurement.
Limits of the Molarity Formula
The simple formula M = n / V works well for dilute solutions and for most general chemistry problems. However, it has limitations:
- Temperature dependence: Volume changes with temperature, so molarity changes too. For high-precision work, chemists often use molality (moles per kg of solvent) instead, because mass does not change with temperature.
- Non-ideal behavior: At high concentrations, the actual “effective concentration” (activity) differs from molarity. This matters in physical chemistry and biology, but not in typical practice problems.
- Volume additivity: When you mix two solutions, the final volume is not always the exact sum of the individual volumes, especially with concentrated solutions or when a chemical reaction occurs.
Frequently Asked Questions
What is the difference between molarity and molality?
Molarity (M) is moles of solute per liter of solution, while molality (m) is moles of solute per kilogram of solvent. Molality does not change with temperature because it depends on mass, not volume. Use molality for colligative properties like boiling point elevation or freezing point depression.
How do I convert from grams to moles for molarity?
Divide the mass of the solute (in grams) by its molar mass (in g/mol). For example, 10 g of NaOH (molar mass 40.0 g/mol) is 10 ÷ 40.0 = 0.25 mol. Then use that number as n in the molarity formula.
Why is the volume in molarity the final solution volume, not the solvent volume?
Because molarity is defined as moles per liter of solution, not per liter of solvent. When you dissolve a solute, the total volume of the solution can be slightly more or less than the solvent volume alone. In practice, you make a solution in a volumetric flask and add solvent up to the mark, so the final volume is known.
Can I use molarity for gases?
Molarity is typically used for solutions (liquid or solid dissolved in a liquid). For gases, concentration is usually expressed as molarity only if you are talking about a gas dissolved in a liquid. For pure gases, you would use pressure, volume, and the ideal gas law instead.
What does a 1 M solution mean in real terms?
A 1 M solution contains 1 mole of solute in every liter of solution. For example, 1 L of 1 M NaCl contains 58.44 g of NaCl (its molar mass). It is a common concentration in lab work, though many biological solutions are much more dilute (millimolar, µM).
How do I prepare a solution of a given molarity?
Calculate the required moles (M × V), convert to grams using molar mass, weigh the solid, dissolve it in a small amount of solvent in a volumetric flask, then add solvent up to the calibration mark. Mix thoroughly. For a dilution, use M₁V₁ = M₂V₂ to find the volume of stock solution needed.
Related
Formula used
in n | Moles of solute | mol | 0.5 | 0 in v | Volume of solution | L | 1 | 0 out molarity | Molarity | mol/L | n / v | 2 out moles_needed | Moles for 1 L | mol | n / v | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.