ThisCalculator

Everyday

Make Wyze Camera Record: Full Setup Guide

Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered

To make your Wyze camera record continuously, you need a microSD card (sold separately) and you must enable continuous recording in the camera’s settings. Without a microSD card, Wyze cameras only record short motion-triggered clips to the cloud, which are free but limited to 12-second events with a 5-minute cooldown. This guide walks you through the setup, explains the difference between continuous and event recording, and answers common questions about storage, playback, and troubleshooting.

What You Need for Continuous Recording

Continuous recording (also called 24/7 recording) saves video to a microSD card inserted directly into the camera. The card must be a microSD, microSDHC, or microSDXC card with a capacity between 8 GB and 256 GB, and it should be Class 10 or UHS-1 rated to handle constant writes. Wyze cameras do not include a card in the box, so you must purchase one separately. A 32 GB card stores roughly 3–4 days of continuous 1080p footage, while a 256 GB card can hold about 30 days.

You also need the Wyze app installed on your phone and the camera already connected to your Wi-Fi network. The setup is done entirely through the app; there is no web interface for this setting.

Step-by-Step: Enable Continuous Recording

  1. Insert the microSD card into the slot on the back or bottom of the camera. You should hear a click when it is fully seated. If the camera is already mounted, you may need to unmount it temporarily.
  2. Open the Wyze app and select the camera from the home screen.
  3. Tap the gear icon (Settings) in the top-right corner.
  4. Scroll down to “Advanced Settings” (on some versions it is labeled “Recording Settings”).
  5. Tap “Continuous Recording” and toggle it on. If you do not see this option, your camera model may not support it (see the comparison section below).
  6. If prompted, format the SD card. The app will erase all existing data on the card, which is necessary for the camera to write correctly.
  7. Exit settings. The camera will now record continuously, overwriting the oldest footage when the card is full.

If you want to keep event clips as well, leave the “Event Recording” toggle on. Both types of recording can run simultaneously: continuous video goes to the SD card, and motion-triggered clips go to the cloud (or to the card if you have a Cam Plus subscription).

How to Play Back Recorded Video

To view the continuous footage, open the live view of your camera and tap the “Playback” tab at the bottom of the screen. A timeline appears showing the last 24 hours. You can drag your finger along the timeline to scrub through the video, or tap the calendar icon to jump to a specific date. The timeline shows a colored bar when motion was detected, making it easy to find events.

If you have a Cam Plus subscription, you can also view event clips in the “Events” tab. But continuous playback requires the SD card; there is no way to view 24/7 footage from the cloud without a subscription to Cam Plus, and even then, the cloud stores only event clips, not continuous video.

Camera Models and Their Recording Options

Not every Wyze camera records the same way. The Wyze Cam v2, v3, and Pan v2 all support continuous recording with a microSD card. The Wyze Cam OG and Wyze Cam Floodlight also support it. However, the Wyze Cam Pan v1 (the original pan model) does support continuous recording, but it has a known limitation: the camera’s pan/tilt motor can interfere with the SD card slot, so you must be careful when inserting the card.

The Wyze Cam v1 (the first generation) does NOT support continuous recording at all—it only does event clips. If you have an older v1, you cannot add continuous recording without upgrading the hardware. The Wyze Battery Cam and Wyze Cam Outdoor (the battery-powered ones) do not support continuous recording because they run on battery power; they only record motion events to save battery life. For those models, you can increase the event recording length with a Cam Plus subscription, but you cannot get 24/7 footage.

Common Problems and How to Fix Them

No “Continuous Recording” option: If you don’t see the toggle, your camera model likely doesn’t support it (check the list above) or the firmware is outdated. Update the camera firmware via the app: Settings > Device Info > Firmware Update.

Recording stops after a few hours: This usually means the SD card is too slow or failing. Use a high-endurance card designed for security cameras, such as a Class 10/UHS-1 card. Also, try formatting the card in the app (Settings > Advanced Settings > Format SD Card).

Playback timeline is empty: The card may not be seated properly, or the camera may have been unplugged. Check that the card is inserted correctly and that the camera has power. If the issue persists, remove the card and insert it into a computer to see if it is recognized. If the card is corrupted, format it using the app or a computer.

Camera reboots randomly: This can happen if the power adapter is too weak. Use the included adapter and cable; third-party adapters may not supply enough current. Also, avoid using a very long extension cable that causes voltage drop.

Continuous vs. Event Recording: What’s the Difference?

Continuous recording saves every second of video to the SD card, giving you a complete timeline. Event recording only captures short clips when motion or sound is detected. Without a subscription, event clips are limited to 12 seconds and there is a 5-minute cooldown between recordings. With Cam Plus, event clips can be up to 3 minutes long and there is no cooldown.

Continuous recording is ideal if you want to review what happened before and after an event, or if you need to prove that nothing happened during a certain time. The downside is that it fills up the SD card quickly and you must manually search through hours of footage. Event recording is more convenient for quick checks but can miss incidents if the camera is in cooldown or if motion occurs just outside the detection zone.

Most users enable both: continuous for full coverage and event clips for quick alerts. You can set motion detection zones to reduce false alerts while still having the full timeline available.

Costs and Storage Considerations

The microSD card is the only hardware cost for continuous recording. A 32 GB card costs about $10–15, and a 128 GB card costs about $20–30. There is no monthly fee for continuous recording to the SD card. However, if you want cloud event clips without the 12-second limit, you need Cam Plus, which costs about $1.99 per camera per month or $9.99 per year (prices vary).

Storage capacity depends on the camera’s resolution and frame rate. Wyze cameras record at 1080p at 15 fps by default. At that setting, a 32 GB card holds about 3–4 days of continuous footage. If you lower the resolution to 360p in the app settings, you can extend that to about 2 weeks, but the video quality will be poor. A 256 GB card at 1080p holds about 30 days. The camera automatically overwrites the oldest footage when the card is full, so you never need to manually delete files.

Safety and Privacy Tips

Continuous recording means the camera is always capturing audio and video. Be aware of local laws regarding recording in public or private spaces. In many jurisdictions, it is legal to record on your own property, but it is illegal to record areas where people have a reasonable expectation of privacy (e.g., bathrooms, changing rooms).

To protect your footage, enable two-factor authentication on your Wyze account and use a strong password. Keep the camera’s firmware updated to receive security patches. If you sell or dispose of the camera, remove the SD card and format it to erase all data. Also, be cautious when placing the camera so it does not point into a neighbor’s home or a public street, as this may cause privacy complaints.

Frequently Asked Questions

Q: Can I record 24/7 without an SD card?
A: No. Wyze cameras do not offer cloud-based continuous recording. Without an SD card, you only get event clips (12 seconds free, or longer with Cam Plus). The SD card is required for 24/7 recording.

Q: How long does a 64 GB SD card record continuously?
A: At 1080p with default settings, a 64 GB card holds about 6–8 days of continuous video. At 360p, it can hold about 4 weeks. The exact duration depends on the camera’s bitrate, which varies slightly by model.

Q: Will continuous recording wear out my SD card faster?
A: Yes, constant writing will wear out a standard SD card. Use a high-endurance card (often labeled for dashcams or security cameras) that is rated for 24/7 writes. These cards typically last several years under continuous use.

Q: Can I record to a network drive (NAS) or FTP?
A: No, Wyze cameras do not support FTP or NAS directly. You can only record to the microSD card or to the Wyze cloud (for event clips). Some users use third-party software like RTSP (only on certain models) to stream to a NAS, but this requires a firmware hack and is not officially supported.

Q: Why is my playback timeline grayed out?
A: The grayed-out timeline means there is no recorded video for that time period. This can happen if the SD card is not inserted, the camera was off, or recording was disabled. Check the SD card status in Settings > Device Info > SD Card Status.

Q: Does the camera record when the app is closed?
A: Yes, recording is done on the camera itself, so it works even when the app is closed or your phone is off. The camera needs to be powered and connected to Wi-Fi for cloud features, but continuous recording to the SD card works even if Wi-Fi is down (though you won’t get alerts).

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.