Optical Illusion: Co-Packaged Optics Data Center Shift?
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
Co-packaged optics (CPO) is indeed a major networking shift for data centers, moving optical engines directly onto the switch ASIC package to dramatically reduce power and cost at high speeds. This article explains what CPO is, how it works, its benefits and challenges, and how it compares to pluggable optical modules, so you can understand the technology that is reshaping modern data center networking.
Background: Why Data Centers Need a New Optical Approach
Data center traffic has grown exponentially for years, driven by cloud computing, AI training, and streaming services. As switch speeds increased from 100G to 800G and beyond, the electrical connections between the switch chip and the optical transceivers at the front panel became a bottleneck. The traditional design uses pluggable optical modules (like QSFP-DD or OSFP) that sit at the edge of the switch, connected to the ASIC through copper traces on the printed circuit board. These traces lose signal integrity at higher data rates, requiring more power for signal conditioning and limiting the distance the signal can travel.
The industry response is co-packaged optics, where the optical engine (the part that converts electrical signals to light and vice versa) is placed on the same package as the switch ASIC. This eliminates the long electrical traces, reducing power consumption and increasing bandwidth density. Major switch vendors and cloud operators are investing heavily in CPO, with early deployments expected in the late 2020s.
How Co-Packaged Optics Works
In a CPO switch, the optical engines are attached directly to the substrate that carries the switch chip. These engines contain laser drivers, photodetectors, and modulators, and they connect to the ASIC through very short, high-speed electrical traces. The optical fibers are then routed from the package to the front panel, where they connect to fiber optic cables using a connector (often a standard MPO or a new CPO-specific connector).
The key advantage is that the electrical signal travels only a few millimeters instead of several inches, which reduces signal loss and crosstalk. This allows each electrical lane to operate at higher speeds (e.g., 112 Gbps per lane) with lower power. The optical engines themselves can be silicon photonics or based on other materials, and they often use advanced packaging techniques like 2.5D integration, where the optical die sits next to the ASIC on a silicon interposer.
There are two main CPO architectures: co-packaged (optical engines on the same package as the ASIC) and near-package (optical engines on the same substrate but not on the ASIC package). Near-package is considered a stepping stone because it allows for easier servicing.
Benefits: Why CPO Is Attractive
The primary benefits of CPO are power efficiency, cost, and bandwidth density.
- Lower power: By eliminating the electrical traces and their associated signal conditioning, CPO can reduce the power per bit by 30-50% compared to pluggables. This is crucial for large data centers where power is a major operating cost.
- Higher bandwidth: CPO enables higher per-port speeds (e.g., 1.6T, 3.2T) because the electrical interface is not limited by the front panel connector. This allows switches to support more total bandwidth in the same rack space.
- Reduced cost: While the initial investment in CPO is high, the cost per bit of transmission is expected to be lower than pluggables at high speeds, because the optical components are integrated and share the packaging and testing costs.
- Improved signal integrity: Short electrical paths reduce bit error rates and allow for higher-order modulation formats, increasing the reach of the optical signal.
How to Choose: CPO vs. Pluggable Optics
Choosing between CPO and pluggable optics depends on your specific use case. For most data centers today, pluggables remain the standard because they are flexible, field-replaceable, and supported by a mature ecosystem. However, for large-scale AI and machine learning clusters that require massive bandwidth and low latency, CPO offers a compelling advantage.
Consider these factors:
- Scale: If you are building a mega data center with thousands of switches, the power savings of CPO can be significant. For smaller deployments, the cost premium may not be justified.
- Upgradeability: Pluggables allow you to upgrade the optics without changing the switch, which is a major advantage. With CPO, the optics are fixed, so you must replace the entire switch to change the optical speed or reach.
- Reliability: Pluggables are easier to replace if they fail. CPO failures may require replacing the entire switch, though the optical engines themselves are designed to be highly reliable.
- Port density: CPO can provide higher port density because the optical connectors are smaller than pluggable modules, but this requires careful fiber management.
Common Problems and Misconceptions
One common misconception is that CPO will completely replace pluggables in the near future. In reality, pluggables will remain dominant for many years, especially for short-reach connections within a rack. CPO is initially targeting the highest-speed, highest-density switches used in AI training clusters.
Another issue is the laser reliability. Lasers are the most failure-prone component in optical transceivers. In pluggables, a failed laser means replacing the module. In CPO, a failed laser could mean replacing the entire switch. To mitigate this, CPO designs often use external laser sources that are separate from the optical engine, allowing them to be replaced without touching the switch.
Fiber management is also a challenge. With CPO, a single switch might have hundreds of fiber connections, requiring careful routing and labeling. This increases the complexity of installation and maintenance, and it requires new tools and training for technicians.
Costs and Economic Considerations
The cost of CPO is currently higher than pluggables due to the advanced packaging and testing required. However, the total cost of ownership (TCO) can be lower for large deployments because of the power savings. For example, a data center with 10,000 switches might save millions of dollars per year in electricity, which can offset the higher upfront cost.
Additionally, CPO enables higher port speeds, which means fewer switches are needed to achieve the same aggregate bandwidth. This reduces capital expenditure on switches and the associated cabling, cooling, and space.
As the technology matures and volume increases, the cost of CPO is expected to drop. Industry roadmaps suggest that CPO will become cost-competitive with pluggables at 1.6T and above, which is why most major switch vendors are developing CPO products.
Safety and Operational Considerations
While CPO does not introduce new electrical safety risks, there are operational considerations. The optical engines generate heat, and the packaging must be designed to dissipate that heat effectively. This often requires advanced cooling solutions, such as liquid cooling, which can add complexity and cost.
Laser safety is also important. The optical power levels used in CPO are similar to those in pluggables, but the proximity of the lasers to the switch ASIC means that any leakage could damage the chip. Manufacturers must ensure that the packaging is hermetically sealed to protect the lasers and the ASIC.
For data center operators, the main safety concern is the use of liquid cooling if it is required. This involves handling coolants, which must be non-conductive and non-flammable, and ensuring that the cooling system is properly maintained to prevent leaks.
Frequently Asked Questions
What is the difference between co-packaged optics and pluggable optics?
Pluggable optics are separate modules that plug into the front panel of a switch, connecting to the ASIC via electrical traces. Co-packaged optics place the optical engine directly on the ASIC package, eliminating those traces and reducing power and latency. Pluggables are field-replaceable and flexible; CPO is not.
When will co-packaged optics be widely available?
Early CPO products are expected to be deployed in hyperscale data centers around 2025-2026, with broader adoption in the late 2020s. However, pluggables will remain the standard for most applications for at least the next five years.
Is co-packaged optics cheaper than pluggables?
Initially, CPO is more expensive per port, but the total cost of ownership can be lower due to reduced power consumption and higher port density. As volume increases, the cost is expected to come down, making it competitive at 1.6T and beyond.
Can co-packaged optics be upgraded?
No, the optics are fixed on the package. If you need a different optical speed or reach, you must replace the entire switch. This is a key trade-off compared to pluggables, which can be swapped individually.
Does co-packaged optics use more or less power?
CPO uses significantly less power per bit compared to pluggables, typically 30-50% less, because it eliminates the electrical traces and signal conditioning circuits. This is a major driver for adoption in large data centers.
What are the main challenges of co-packaged optics?
The main challenges are laser reliability, fiber management, heat dissipation, and the lack of field replaceability. Manufacturers are addressing these with external laser sources, advanced packaging, and liquid cooling solutions.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.