ThisCalculator

Everyday

Add More HDMI Ports to Your TV: Best Devices

Updated · Standard formula, shown below

Yes, you can add more HDMI ports to your TV using an HDMI switch, an HDMI splitter, or an AV receiver. An HDMI switch lets you connect multiple sources to one TV port, an HDMI splitter sends one source to multiple displays, and a receiver acts as a central hub with multiple inputs and outputs.

Why You Need More HDMI Ports

Modern TVs often come with only 2 to 4 HDMI ports, but most households have more devices than that: a cable or satellite box, a streaming stick, a game console, a Blu-ray player, a soundbar, and maybe a PC. When you run out of ports, you end up swapping cables or leaving devices unplugged. Adding a switch or receiver solves this by giving you a central place to plug everything in, while using just one port on your TV.

HDMI Switch vs. Splitter: What’s the Difference?

These two devices are often confused, but they do opposite jobs:

  • HDMI switch: Takes multiple source devices (e.g., a console and a streaming box) and connects them to one TV input. You select which source to display.
  • HDMI splitter: Takes one source (e.g., a cable box) and sends the same signal to multiple displays (e.g., two TVs in different rooms).

If your problem is “too many devices, not enough TV ports,” you need a switch. If your problem is “I want the same picture on two TVs,” you need a splitter. A receiver does both but is more expensive and complex.

How an HDMI Switch Works

An HDMI switch is a small box with several HDMI inputs (typically 3, 5, or 7) and one output that goes to your TV. It passes the video and audio signal from the selected input to the TV. Most switches are powered by a wall adapter, which is important because the switch needs power to route the signal and to maintain HDCP (High-bandwidth Digital Content Protection) handshakes with your devices.

Many switches support auto-switching, where they detect which input is receiving a new signal and switch to it automatically. Others require you to press a button on the device or use a remote control. Some higher-end models support HDMI-CEC (Consumer Electronics Control), which lets you control the switch with your TV’s remote.

What to Look For When Buying an HDMI Switch

Not all switches are equal. Here are the key specs to check:

  • HDMI version: Look for HDMI 2.0 or 2.1. HDMI 2.0 supports 4K at 60Hz, while HDMI 2.1 supports 4K at 120Hz and 8K. If you have a gaming console that outputs 4K 120Hz, you need an HDMI 2.1 switch.
  • HDCP support: HDCP 2.2 or 2.3 is required for 4K streaming and Blu-ray. Older switches may not support it, causing a blank screen.
  • Power supply: Always choose a switch with its own power adapter. Unpowered switches often fail to maintain signal with multiple devices.
  • Number of inputs: Count your devices and leave at least one spare input for future additions.
  • Remote or auto-switching: Decide if you want manual control or automatic detection. Auto-switching is convenient but can be annoying if it switches unexpectedly.

Common Problems and How to Avoid Them

Even with a good switch, you might run into issues:

  • No signal or flickering: This often happens with cheap, unpowered switches. Use a powered switch and high-speed HDMI cables.
  • HDCP errors: If a device refuses to play content, the switch may not be passing HDCP correctly. Check that the switch supports HDCP 2.2 or 2.3.
  • Auto-switching fails: Some devices (like older streaming sticks) don’t send a strong enough signal to trigger auto-switch. Use manual switching instead.
  • 4K 120Hz not working: Make sure the switch, cables, and TV all support HDMI 2.1. A single HDMI 2.0 cable in the chain will bottleneck the signal.

Alternative: Use an AV Receiver

If you have a home theater setup, an AV receiver (AVR) can serve as a central hub. Most AVRs have 4 to 7 HDMI inputs and at least one output to the TV. They also handle audio routing, so you can connect speakers and subwoofers. The downside is cost and complexity: a decent AVR is more expensive than a switch, and you need to configure audio and video settings. But if you already have a receiver for sound, it’s the cleanest solution.

Another alternative is to use the TV’s USB port to power a streaming stick, freeing up an HDMI port. Some TVs also have an “HDMI ARC” or “eARC” port that you can use for a soundbar, but that doesn’t add extra inputs.

Cost and Installation

HDMI switches range from about $15 for a basic 3-port model to over $100 for an 8-port HDMI 2.1 switch with remote and auto-switching. Splitters are similar in price. AV receivers start around $200 and go up from there. Installation is straightforward: plug the switch into the TV, plug your devices into the switch, and power it on. No software setup is needed for basic switches, though some advanced models have apps or web interfaces for configuration.

Frequently Asked Questions

Will an HDMI switch add lag or reduce picture quality?

No, a good HDMI switch is a passive pass-through device. It does not process the video signal, so it does not add input lag or degrade picture quality. The only thing that matters is that the switch supports the same HDMI version and bandwidth as your devices. A cheap switch might not support the full bandwidth, which can cause flickering or loss of signal, but that is a compatibility issue, not a quality loss.

Can I use an HDMI splitter to send one source to two TVs?

Yes, that is exactly what a splitter does. It takes one HDMI output and duplicates it to multiple displays. However, if you want to send different content to each TV, you need a switch (which selects between sources) or a matrix switch (which routes multiple sources to multiple displays). A simple splitter sends the same signal to all outputs.

Do I need an HDMI 2.1 switch for a PS5 or Xbox Series X?

If you want to take advantage of 4K 120Hz gaming, yes. The PS5 and Xbox Series X can output 4K at 120Hz, which requires HDMI 2.1 bandwidth. If you use an HDMI 2.0 switch, the console will fall back to 4K 60Hz or lower. For most other devices, HDMI 2.0 is sufficient.

Why does my switch work with one device but not another?

This is usually due to HDCP or power issues. Some devices (like certain streaming boxes) are more sensitive to HDCP handshakes. Try powering the switch with its own adapter (if it has one), using a different HDMI cable, or manually selecting the input. If the problem persists, the switch may not be fully compatible with that device’s HDCP version.

Can I connect a switch to a soundbar?

Yes, but it depends on your setup. If your soundbar has an HDMI input and output (ARC/eARC), you can connect the switch to the soundbar’s input and then the soundbar to the TV. However, this only works if the soundbar passes video through. Alternatively, connect the switch directly to the TV and use the TV’s ARC/eARC port for the soundbar. The latter is more reliable.

Is there any way to add more ports without a switch?

You could use the TV’s USB port to power a streaming stick, freeing up an HDMI port. Some TVs also have a “Component” or “AV” input that you can use with an adapter, but that is rare. The only practical way to add multiple HDMI ports is to use a switch, splitter, or AV receiver.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.