ThisCalculator

Everyday

Choosing AI Inference Hardware: NVIDIA vs Huawei vs Cloud

Updated · Standard formula, shown below

This guide helps you pick the right hardware for running AI inference—the process of feeding a trained model new data and getting predictions. You’ll learn how to compare NVIDIA GPUs, Huawei Ascend processors, and cloud services, and what to consider like cost, latency, and compatibility. Before you start, you’ll need a clear idea of your model’s size, your expected traffic, and your budget.

What You’ll Need

  • Model details: framework (PyTorch, TensorFlow, ONNX), model size in GB, and inference latency target (e.g., under 50ms).
  • Traffic estimate: expected requests per second (RPS) and peak load.
  • Budget: upfront hardware cost vs. ongoing cloud spend.
  • Deployment environment: on-premises data center, edge device, or cloud.

Step-by-Step

  1. Define your inference requirements. Write down the model’s input size, batch size, and desired latency. For example, a real-time object detection model might need 30ms per image. Also note the model’s precision needs—FP16, INT8, or FP32—since that affects hardware choice.
  2. Estimate your throughput needs. Calculate the number of inferences per second you must support. Multiply your average RPS by a safety factor (e.g., 1.5) for peak times. This number drives how many accelerators you need.
  3. Check software compatibility. Ensure your model’s framework and version are supported by the hardware’s SDK. NVIDIA uses CUDA and TensorRT; Huawei uses CANN and MindSpore. If your model uses a niche operator, verify it’s supported or can be converted.
  4. Evaluate NVIDIA GPUs. For most users, NVIDIA is the default due to mature software. Look at the A2, A10, A100, and L4 for data center inference. Use the official spec sheets for TOPS (INT8) and memory bandwidth. For example, an A10 offers 31 TFLOPS FP32 and 125 TFLOPS INT8, suitable for medium workloads.
  5. Evaluate Huawei Ascend. If you’re in a region with strong Huawei support or need to comply with local regulations, consider Ascend 310 and 910. The 310 is for edge, 910 for data center. Check if your model’s operators are supported in CANN; you may need to convert using MindSpore or ONNX.
  6. Consider cloud options. Cloud inference removes upfront cost and scales automatically. Major providers offer GPU instances (e.g., AWS EC2 G4/G5, Azure NC series, Google Cloud T4/L4). Some also offer serverless inference like AWS SageMaker or Google Vertex AI, which handle scaling for you.
  7. Run a benchmark with your own model. Don’t rely on vendor specs. Create a test script that loads your model and measures latency and throughput on a sample dataset. Test on at least one GPU and one cloud instance to compare.
  8. Compare total cost of ownership. For on-prem, include hardware purchase, power, cooling, and maintenance over 3 years. For cloud, estimate monthly cost based on your RPS and instance type. Use a simple formula: (instances × hourly rate × 730 hours) + data transfer costs.
  9. Decide on batch size. Larger batches improve throughput but increase latency. If your application can tolerate waiting, choose a batch size that maximizes GPU utilization. Test with batch sizes like 1, 8, 32 to find the sweet spot.
  10. Plan for scaling. Choose a solution that can grow. For on-prem, ensure your server has room for additional GPUs. For cloud, set up auto-scaling policies based on queue depth or CPU utilization.

Common Mistakes

  • Ignoring software compatibility: A model that uses custom CUDA kernels won’t run on Ascend without rewriting.
  • Focusing only on raw TOPS: Real-world throughput depends on memory bandwidth, PCIe speed, and software optimization.
  • Underestimating latency variance: Cloud instances share resources; you may see spikes. Test under load.
  • Forgetting about power and cooling: High-end GPUs can draw 300W+; your data center may need upgrades.
  • Choosing a GPU with too little memory: If your model exceeds VRAM, it spills to CPU and becomes very slow.

Tips

  • Use INT8 quantization where possible—it can double or triple throughput on both NVIDIA and Ascend.
  • For cloud, start with a single instance and scale out; don’t over-provision initially.
  • Leverage model optimization tools like TensorRT (NVIDIA) or AOE (Huawei) to speed up inference.
  • Consider using a mix: run on-prem for steady load, burst to cloud for spikes.
  • Check if your cloud provider offers spot instances for non-critical inference to cut costs.

Troubleshooting

  • Model fails to load on Ascend: Convert your model to ONNX first, then use the Ascend converter. Check operator support in the CANN documentation. If an operator is missing, replace it with a supported alternative.
  • Latency is higher than expected: Check if the model is using CPU instead of GPU. Use nvidia-smi or npu-smi to verify utilization. Also, ensure you’re not hitting a CPU bottleneck in preprocessing.
  • Cloud instance runs out of memory: Reduce batch size, or switch to an instance with more GPU memory. Use memory profiling tools to see where memory is consumed.
  • Throughput is lower than vendor spec: Benchmark with your own model and realistic batch sizes. Vendor specs often use ideal conditions. Also, check if your model is I/O-bound due to data loading.
  • Costs exceed budget: Review your auto-scaling policy—it may be scaling too aggressively. Use reserved instances for steady load, and spot for flexible work.

Frequently Asked Questions

  1. Can I run any model on Huawei Ascend? Not all models work out of the box. You need to convert the model to a supported format (like ONNX) and ensure all operators are supported. Many common models like ResNet and BERT are supported, but custom layers may require work.
  2. Is cloud always cheaper than on-premises? Not necessarily. For steady, high-volume workloads, on-premises can be cheaper over 3 years. Cloud is more cost-effective for variable or low-volume workloads, as you pay only for what you use.
  3. What is the difference between training and inference hardware? Training requires high precision (FP32/FP16) and large memory, while inference can use INT8 and often needs lower power. Inference hardware is optimized for latency and throughput, not for backpropagation.
  4. How do I measure inference latency? Send a single request to the model and measure the time from input to output. Use a tool like ‘time’ or a custom script. For realistic numbers, test under load with concurrent requests.
  5. Can I use a consumer GPU like RTX 4090 for inference? Yes, for small-scale or development. But for production, data center GPUs offer better reliability, ECC memory, and support. Consumer GPUs lack some features like virtualization and have limited warranties for 24/7 use.
  6. What is the role of batch size in inference? Batch size is the number of inputs processed at once. Larger batches increase throughput (more work per second) but increase latency (time to get a result). Choose based on your application’s tolerance for delay.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.