ThisCalculator

Everyday

Conversion Factor for Temperature: Formula & Examples

Updated · Standard formula, shown below

Fahrenheit 77.00 °F
Kelvin
298.15 K
Result
Temperature
25 °C
You entered

This page explains the conversion factors used to change a temperature reading between the three main scales: Celsius (°C), Fahrenheit (°F), and Kelvin (K). Enter a temperature in any unit and the calculator returns the equivalent value in the other two scales, using the exact formulas below.

Formula

The conversion factors are linear relationships. For a temperature T in degrees Celsius:

  • Fahrenheit: T°F = (T°C × 9/5) + 32
  • Kelvin: TK = T°C + 273.15

To convert from Fahrenheit to Celsius: T°C = (T°F − 32) × 5/9. To convert from Kelvin to Celsius: T°C = TK − 273.15.

Each variable is a temperature value. The factor 9/5 (or 1.8) is the ratio of the size of one degree Fahrenheit to one degree Celsius. The constant 32 is the freezing point of water in Fahrenheit. The constant 273.15 is the offset between the Celsius and Kelvin scales, where 0 K is absolute zero (−273.15 °C).

Worked Example

Using the default input of 25 °C:

  1. Fahrenheit: 25 × 9/5 = 45; 45 + 32 = 77 °F.
  2. Kelvin: 25 + 273.15 = 298.15 K.

The calculator shows 77.00 °F and 298.15 K, matching the formulas.

Why Three Scales?

Celsius (formerly centigrade) is used in most of the world and in science. It sets 0 °C as the freezing point of water and 100 °C as the boiling point at standard atmospheric pressure. Fahrenheit, used mainly in the United States, sets 32 °F as the freezing point and 212 °F as the boiling point of water, giving 180 equal divisions between them. Kelvin is the SI base unit of temperature, used in physics and chemistry because it starts at absolute zero—the point where molecular motion stops—and uses the same degree size as Celsius. The Kelvin scale has no negative numbers.

How to Read the Result

The converted value tells you the same physical temperature on a different scale. For example, 25 °C feels warm; 77 °F is the same warmth. A Kelvin value of 298.15 K is often used in gas law calculations because it is an absolute scale. When reading results, remember that a change of 1 °C equals a change of 1 K, but a change of 1 °F equals a change of 5/9 °C (about 0.556 °C).

Common Mistakes

  • Forgetting to add 32 when going from Celsius to Fahrenheit—this produces a value that is 32 °F too low.
  • Using the factor 5/9 instead of 9/5. The correct factor is 9/5 when converting from °C to °F, and 5/9 when converting from °F to °C.
  • Adding 273.15 to Fahrenheit values. You must first convert to Celsius, then add 273.15.
  • Mixing up the freezing point: water freezes at 0 °C, 32 °F, and 273.15 K, not at 0 °F or 0 K.

Limits of the Formula

The formulas are exact for all temperatures, but they assume the temperature is a single, well-defined point. In practice, temperature can vary with altitude, pressure, and measurement method. For example, the boiling point of water is 100 °C only at sea level; at higher altitudes it is lower. The conversion formulas themselves do not account for such environmental factors—they simply translate between scales. Also, when dealing with very large or very small temperatures, rounding can matter. The calculator rounds to two decimal places, which is precise enough for most everyday and laboratory uses.

Frequently Asked Questions

What is the conversion factor from Celsius to Fahrenheit?

The factor is 9/5 (or 1.8). Multiply the Celsius temperature by 9/5, then add 32. For example, 20 °C × 9/5 = 36, plus 32 gives 68 °F.

Why is the Fahrenheit scale so different?

Daniel Gabriel Fahrenheit originally set 0 °F as the coldest temperature he could achieve in his lab (a brine mixture) and 96 °F as human body temperature (later adjusted to 98.6 °F). The scale was later recalibrated so that water freezes at 32 °F and boils at 212 °F, giving 180 degrees between them.

Is Kelvin the same as Celsius?

No, but they use the same degree size. The difference is the zero point: 0 K is absolute zero (−273.15 °C), and 0 °C is the freezing point of water (273.15 K). To convert, simply add or subtract 273.15.

Can I convert directly from Fahrenheit to Kelvin?

Yes, but it requires two steps: first convert Fahrenheit to Celsius, then add 273.15. The combined formula is K = (°F − 32) × 5/9 + 273.15.

What is absolute zero in Fahrenheit?

Absolute zero is −459.67 °F. This is the point where all molecular motion stops, and it is the lowest possible temperature.

Do I need to round to whole degrees?

It depends on the context. For weather, whole degrees are usually fine. For scientific work, keep more decimal places. The calculator gives two decimals, which is suitable for most purposes.

Related

Formula used
in temp | Temperature | °C | 25 | 0
out f | Fahrenheit | °F | temp * 9 / 5 + 32 | 2
out k | Kelvin | K | temp + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.