ThisCalculator

Everyday

Barometric Pressure Conversion Calculator

Updated · Standard formula, shown below

The calculator for this page is switched off while it is checked. The formula is below, and the worked example in the article shows how to use it by hand.

This calculator converts barometric pressure readings between the most common units: inches of mercury (inHg), millibars (hPa), pounds per square inch (psi), and atmospheres (atm). You enter a numeric value and select the unit it is in, and the tool instantly returns the equivalent pressure in all other units, so you can compare weather reports, altimeter settings, and industrial specs without manual math.

Formula

The conversion relies on fixed, internationally accepted equivalences between pressure units. The base unit used here is the millibar (hPa), which is numerically identical to the hectopascal used in meteorology worldwide.

  • 1 atm = 1013.25 hPa = 29.9213 inHg = 14.6959 psi
  • 1 inHg = 33.8639 hPa = 0.4912 psi = 0.03342 atm
  • 1 psi = 68.9476 hPa = 2.0360 inHg = 0.06805 atm

To convert any value, multiply it by the ratio between the input unit and the desired output unit. For example, to go from inHg to hPa: hPa = inHg × 33.8639. The calculator applies these factors automatically for all six pairings.

Worked Example

Using the default input of 29.92 inHg (standard sea-level pressure), the conversion proceeds as follows:

  1. inHg to hPa: 29.92 × 33.8639 = 1013.2 hPa
  2. inHg to psi: 29.92 × 0.4912 = 14.69 psi
  3. inHg to atm: 29.92 × 0.03342 = 1.0000 atm

The calculator shows 1013.2 hPa, 14.69 psi, and 1.0000 atm—exactly what you get from the standard atmosphere definition. Notice that the results are rounded to the displayed decimals, so small rounding differences (like 1013.25 vs 1013.2) are expected.

Why Barometric Pressure Units Differ

Barometric pressure is measured with different units depending on the context and region. Meteorologists in the U.S. often use inches of mercury (inHg) for surface weather maps, while most of the world uses hectopascals (hPa) or millibars (mb)—they are the same number. Aviation uses both inHg and hPa for altimeter settings. Engineers and divers commonly work in psi or atmospheres. Because these units are all linear scales of the same physical quantity, converting between them is straightforward once you know the fixed factors.

Understanding the unit you are starting from is critical. A value of 1013 without a unit could mean 1013 hPa (normal sea-level pressure) or 1013 psi (about 69 atm, impossibly high for weather). Always label your measurements.

How to Use the Calculator

Using the tool is simple:

  1. Enter the numeric pressure value in the first field.
  2. Select the unit of that value from the dropdown (inHg, hPa, psi, or atm).
  3. Read the equivalent pressures in the three output fields.

The first output (inHg) is the headline answer, so if you enter a pressure in hPa, the calculator will show the inHg equivalent prominently. This is handy when you have a metric reading and need an imperial one for a U.S. weather report or altimeter.

Common Mistakes and Misconceptions

One frequent error is mixing up millibars and hectopascals. They are exactly the same: 1 mb = 1 hPa. Some old instruments show “mb” but modern reports use “hPa”; the numbers are identical, so no conversion is needed.

Another mistake is using absolute pressure when gauge pressure is required. Barometric pressure is always absolute (referenced to a vacuum), while many tire gauges measure gauge pressure (referenced to atmospheric pressure). This calculator handles absolute pressure only; for gauge pressure, you would need to subtract the local atmospheric pressure.

Also, be careful with decimal places. A difference of 0.01 inHg is about 0.34 hPa, which is a tiny change in weather but can matter in precision applications. Round only at the final step, not during intermediate calculations.

When to Use Each Unit

  • inHg – U.S. weather reports, aviation altimeters (in the U.S.), and some industrial gauges.
  • hPa (mb) – International weather reports, aviation worldwide, and most meteorological charts.
  • psi – Engineering, tire pressure, hydraulic systems, and scuba tanks.
  • atm – Chemistry, physics, and diving (as a measure of depth pressure).

Choosing the right unit depends on your audience. If you are reading a weather map from Europe, it will be in hPa; a U.S. map will show inHg. For scientific papers, atm or hPa are common. The calculator lets you switch effortlessly.

Limitations of the Conversion

This calculator converts between units of pressure, but it does not account for temperature, altitude, or humidity, which affect the actual atmospheric pressure. The conversion factors are constant, but the pressure reading itself varies with weather and elevation. For example, at 5,000 feet elevation, the barometric pressure is roughly 24.9 inHg (843 hPa), not the 29.92 inHg sea-level standard. This tool only changes the unit, not the physical value.

Also, the calculator assumes you are using absolute pressure. If you have a reading from a gauge that measures relative pressure, you must add the current atmospheric pressure before converting. For most weather uses, this is not an issue.

Frequently Asked Questions

What is the difference between millibars and hectopascals?

None. They are two names for the same unit: 1 millibar = 1 hectopascal = 100 pascals. Meteorologists switched from “mb” to “hPa” decades ago, but both are still used interchangeably.

Why is standard sea-level pressure 29.92 inHg?

That value is defined as the average atmospheric pressure at sea level at 15°C (59°F). It equals 1013.25 hPa, 14.6959 psi, or 1 atm. It is a reference point, not a constant in nature; actual pressure varies with weather and altitude.

How do I convert inHg to mmHg?

Multiply the inHg value by 25.4. For example, 29.92 inHg × 25.4 = 760 mmHg, which is exactly 1 atm. This calculator does not include mmHg, but the factor is simple.

Can this calculator be used for altimeter settings in aviation?

Yes, but with caution. Aviation altimeters use QNH (sea-level pressure) in either inHg or hPa. If you have a pressure reading in one unit, you can convert it with this tool. However, you must use the correct local pressure, not a standard value.

What is the normal range of barometric pressure?

At sea level, typical weather pressures range from about 28.5 to 31.0 inHg (965 to 1050 hPa). Record highs and lows can go slightly beyond, but most readings fall in that band. The calculator works for any value, but those are the realistic ones.

Does temperature affect the conversion?

No. The conversion factors between pressure units are fixed and independent of temperature. Temperature affects the actual pressure reading (e.g., a tire pressure changes with temperature), but the unit conversion itself is constant.

Related

Formula used
in value | Pressure value | - | 29.92 | 0
sel from | Input unit | inHg=1, hPa=1, psi=1, atm=1
out inHg | Inches of mercury | inHg | value * (from == 1 ? 1 : from == 2 ? 0.0295299830714 : from == 3 ? 2.0360206576 : 29.9212598425) | 2
out hPa | Millibars (hPa) | hPa | value * (from == 1 ? 33.8638866667 : from == 2 ? 1 : from == 3 ? 68.9475729317 : 1013.25) | 1
out psi | Pounds per square inch | psi | value * (from == 1 ? 0.4911541526 : from == 2 ? 0.0145037738 : from == 3 ? 1 : 14.6959487758) | 2
out atm | Atmospheres | atm | value * (from == 1 ? 0.0334210526 : from == 2 ? 0.0009869233 : from == 3 ? 0.0680459639 : 1) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.