Use Mobile Camera as CCTV Camera: How-To
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
Yes, you can use a mobile camera as a CCTV camera, and it works surprisingly well for home monitoring, pet watching, or keeping an eye on a workspace. You install an app on an old smartphone, position it where you need coverage, and view the live feed from another device—usually your main phone or a computer. This guide covers the setup process, the limitations, and the security considerations you need to know before relying on a phone as a security camera.
Formula
The calculator above computes average pace and speed from a given finish time and distance. The formulas are:
Pace (min/km) = Finish time (minutes) ÷ Distance (km)
Speed (km/h) = Distance (km) ÷ (Finish time (minutes) ÷ 60)
Where:
- t = finish time in minutes (e.g., 50 minutes)
- d = distance in kilometers (e.g., 10 km)
- Pace = minutes per kilometer, the standard running metric
- Speed = kilometers per hour, the inverse of pace
Worked Example
Using the default values from the calculator (t = 50 minutes, d = 10 km):
- Pace = 50 ÷ 10 = 5.00 min/km
- Speed = 10 ÷ (50 ÷ 60) = 10 ÷ 0.8333 = 12.00 km/h
The calculator returns a pace of 5.00 min/km and a speed of 12.00 km/h, matching the manual calculation.
When to Use This Calculator
Use this tool when you have a finish time from a race or training run and want to know your average pace per kilometer or your average speed. It is especially handy for planning: if you know the distance of an upcoming event and have a target pace, you can work backward to estimate a finish time. Runners, cyclists, and walkers all use pace and speed to track performance and set realistic goals.
How to Read the Result
A lower pace (min/km) means faster running. For example, a 5:00 min/km pace is faster than a 6:00 min/km pace. Speed in km/h is the opposite: higher means faster. Many runners prefer pace because it directly translates to time over a known distance. If you are comparing efforts on different routes, pace is more consistent than speed because it accounts for distance directly.
Common Mistakes and Unit Mix-Ups
- Mixing miles and kilometers: If your distance is in miles, convert to kilometers first (1 mile = 1.60934 km) or use a miles-based calculator. The formula here assumes kilometers.
- Using seconds instead of minutes: If your finish time is 50 minutes and 30 seconds, convert the seconds to decimal minutes (30 ÷ 60 = 0.5) so the total is 50.5 minutes.
- Rounding too early: Keep at least two decimal places during intermediate steps to avoid a final pace that is off by several seconds.
- Confusing pace and speed: A pace of 5 min/km is not the same as a speed of 5 km/h—the latter is much slower. Always check which unit you are reading.
Limitations of the Formula
This formula assumes constant speed over the entire distance. Real-world runs include hills, stops, and variations in effort, so the average pace is just that—an average. It does not account for elevation gain, terrain, or wind resistance. For most training purposes, the average pace is still a useful metric, but it should not be used to compare performances on vastly different courses without considering those factors.
Frequently Asked Questions
What is a good running pace for a beginner?
There is no single answer, as it depends on age, fitness, and experience. A common benchmark for a recreational runner is around 6:00 to 7:00 min/km (roughly 10 to 9.7 km/h). Beginners often start closer to 7:00–8:00 min/km and gradually improve. The best pace is one you can sustain comfortably for the distance you are training for.
How do I convert my pace to miles per hour?
First, convert your pace from min/km to min/mile (multiply by 1.60934), then divide 60 by that number. For example, a 5:00 min/km pace is 8:03 per mile, and 60 ÷ 8.05 = 7.46 mph. Alternatively, use the speed output from this calculator and convert km/h to mph by multiplying by 0.621371.
Can I use this calculator for cycling?
Yes, the math is the same for any distance-based activity. Enter your cycling distance in kilometers and your total time in minutes to get an average speed in km/h. Cyclists typically have higher speeds than runners, so the pace number will be lower (e.g., 2 min/km).
Why is my pace different on a treadmill?
Treadmills often display speed in km/h or mph, not pace. If your treadmill shows 10 km/h, your pace is 60 ÷ 10 = 6.00 min/km. Many treadmills also have a pace display, but if not, you can use this calculator to convert. Also, treadmill running lacks wind resistance and terrain changes, so the same effort may feel different than outdoors.
How do I calculate my finish time from a target pace?
Multiply your target pace (in minutes per kilometer) by the race distance (in kilometers). For a 10 km race at 5:30 min/km, that is 5.5 × 10 = 55 minutes. You can also use the inverse of this calculator: enter the distance and the desired pace, then solve for time, but this tool only computes pace and speed directly.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.