ThisCalculator

Everyday

Temperature Conversion Formula: C to F and F to C

Updated · Standard formula, shown below

The calculator for this page is switched off while it is checked. The formula is below, and the worked example in the article shows how to use it by hand.

This calculator converts temperatures between Celsius (°C) and Fahrenheit (°F) using the standard conversion formulas. You enter a temperature value and select the direction of conversion, and the calculator returns the equivalent temperature in the other scale. The formulas are simple, but understanding them helps avoid common mistakes when switching between metric and imperial units.

Formula

The temperature conversion formulas are:

  • Celsius to Fahrenheit: °F = (°C × 9/5) + 32
  • Fahrenheit to Celsius: °C = (°F − 32) × 5/9

Where:

  • °C = temperature in degrees Celsius
  • °F = temperature in degrees Fahrenheit

Both formulas are linear, meaning they describe a straight-line relationship between the two scales. The factor 9/5 (or 1.8) accounts for the different size of each degree, and the constant 32 adjusts for the different zero points.

Worked Example

Using the default values from the calculator (25 °C converted to Fahrenheit):

  1. Start with the Celsius value: 25 °C
  2. Multiply by 9/5: 25 × 9/5 = 45
  3. Add 32: 45 + 32 = 77

So 25 °C = 77 °F. The calculator shows 77.0 °F, matching this result.

Why Two Scales Exist

The Fahrenheit scale was developed by Daniel Gabriel Fahrenheit in the early 18th century, using a mixture of ice, water, and salt as a lower reference point (0 °F) and the human body temperature as an upper reference (around 96 °F, later adjusted). The Celsius scale, originally called centigrade, was introduced by Anders Celsius in 1742 and is based on the freezing (0 °C) and boiling (100 °C) points of water at standard atmospheric pressure. Today, Celsius is the standard for most of the world and for scientific work, while Fahrenheit remains common in the United States for everyday weather and cooking.

How to Choose the Right Formula

To decide which formula to use, simply identify the unit you are starting with:

  • If you have a temperature in Celsius and want Fahrenheit, use °F = (°C × 9/5) + 32.
  • If you have a temperature in Fahrenheit and want Celsius, use °C = (°F − 32) × 5/9.

A common memory aid: “F” (Fahrenheit) is the bigger number for the same temperature, so you multiply when going from Celsius to Fahrenheit. For example, 20 °C is 68 °F, and 68 is larger than 20.

Common Mistakes and How to Avoid Them

Several errors frequently occur when converting temperatures:

  • Forgetting to add 32 when going from Celsius to Fahrenheit. Without the +32, 25 °C would become 45 °F instead of 77 °F—a huge difference.
  • Using the wrong factor (e.g., multiplying by 5/9 instead of 9/5). Always check the direction: Celsius to Fahrenheit uses 9/5; Fahrenheit to Celsius uses 5/9.
  • Rounding too early in multi-step calculations. For instance, (100 °F − 32) × 5/9 = 37.777… °C. If you round 68 × 5/9 to 37.8, that is fine, but rounding intermediate steps can introduce errors.
  • Confusing negative temperatures. The formulas handle negatives correctly, but people sometimes expect a “colder” result to be a smaller number in both scales. For example, −40 °C equals −40 °F, which is the only point where the two scales coincide.

Limits of the Formula

The conversion formulas are exact for all real numbers, so there is no mathematical limit. However, the physical meaning of extreme temperatures may be limited by the laws of thermodynamics. Absolute zero, the lowest possible temperature, is −273.15 °C or −459.67 °F. Below that, the formulas would give a number, but it does not correspond to any real physical state. Also, for very high temperatures, the formulas remain valid, but practical measurement may require special instruments.

Frequently Asked Questions

What is the easiest way to convert Celsius to Fahrenheit without a calculator?

A rough mental approximation is to double the Celsius value and add 30. For example, 20 °C × 2 + 30 = 70 °F, close to the exact 68 °F. This works best for typical room temperatures but becomes inaccurate for extreme values.

Why do Fahrenheit and Celsius meet at −40 degrees?

Because the conversion formulas are linear, there is exactly one temperature where the two scales read the same. Setting °F = °C and solving gives −40. At that point, both scales show −40.

Is there a temperature conversion formula for Kelvin?

Yes. Kelvin (K) is the SI unit of temperature, and its scale starts at absolute zero. To convert from Celsius to Kelvin, add 273.15 (K = °C + 273.15). To convert from Fahrenheit to Kelvin, first convert to Celsius, then add 273.15.

Why does the US still use Fahrenheit?

The United States adopted Fahrenheit before the metric system became widespread, and changing a country’s measurement habits is difficult. The Celsius scale is used in most other countries and in scientific contexts worldwide.

How do I convert a temperature difference, not an absolute temperature?

For a difference (e.g., a 10 °C increase), the +32 offset cancels out. So a difference of 10 °C is equal to a difference of 18 °F (10 × 9/5). The same rule applies for Kelvin differences, which are identical to Celsius differences.

Related

Formula used
in t | Temperature | °C | 25 | 0
sel dir | Convert from | Celsius to Fahrenheit=1, Fahrenheit to Celsius=2
out result | Converted temperature | °F or °C | if(dir==1, t*9/5+32, (t-32)*5/9) | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.