ThisCalculator

Everyday

Standard Temperature and Pressure: Imperial Units Explained

Updated · Standard formula, shown below

Pressure in kPa 101.33 kPa
Temperature in °C
15.56 °C
Result
Temperature in K
288.71 K
Result
Temperature
60 °F
You entered

Standard temperature and pressure (STP) in imperial units is 60°F (15.56°C) and 14.696 psi (pounds per square inch absolute). This is the most common definition used in the US natural gas and engineering industries, though other standard conditions exist for different fields. This article explains what STP means, why the imperial version differs from the metric one, and how to convert between them.

Formula

The calculator above converts a temperature in degrees Fahrenheit to Celsius and Kelvin, and a pressure in pounds per square inch (psi) to kilopascals (kPa). The formulas are:

  • Celsius = (°F − 32) × 5/9
  • Kelvin = (°F − 32) × 5/9 + 273.15
  • kPa = psi × 6.894757

Where °F is the temperature in degrees Fahrenheit, psi is the pressure in pounds per square inch absolute, kPa is the pressure in kilopascals, and K is the absolute temperature in kelvins.

Worked Example

Using the default values from the calculator (60°F and 14.696 psi):

  1. Convert 60°F to Celsius: (60 − 32) × 5/9 = 28 × 5/9 = 15.56°C
  2. Convert 60°F to Kelvin: 15.56 + 273.15 = 288.71 K
  3. Convert 14.696 psi to kPa: 14.696 × 6.894757 = 101.325 kPa

So the imperial STP of 60°F and 14.696 psi equals 15.56°C and 101.325 kPa, which matches the metric standard of 0°C and 101.325 kPa only in pressure, not temperature.

Why Two Different Standards Exist

The concept of standard temperature and pressure arose in the 19th century when chemists and physicists needed a common reference for gas volume measurements. The International Union of Pure and Applied Chemistry (IUPAC) originally defined STP as 0°C (273.15 K) and 1 atmosphere (101.325 kPa). However, the natural gas and petroleum industries in the United States found that 0°C was too cold for practical pipeline calculations, so they adopted 60°F (15.56°C) as the standard temperature. This value is close to average ambient temperatures in many US regions and simplifies field measurements.

Imperial Units in Practice

In the US, standard temperature and pressure in imperial units are most often stated as:

  • Temperature: 60°F (15.56°C)
  • Pressure: 14.696 psi (which equals 1 atmosphere)

Sometimes you will see “14.73 psi” or “14.7 psi” used in gas flow calculations. These are slight variations: 14.73 psi is common in the gas transmission industry, while 14.696 psi is the exact standard atmosphere. Always check which one a particular standard or contract specifies.

How to Choose the Right Standard

Which STP you should use depends on your field:

  • Chemistry and physics: IUPAC recommends 0°C and 100 kPa (not 101.325 kPa) since 1982, but many textbooks still use 0°C and 1 atm.
  • US natural gas industry: 60°F and 14.696 psi (or 14.73 psi) is the norm.
  • International gas and oil: Often 15°C (59°F) and 101.325 kPa, especially in Europe and Asia.
  • Standard ambient temperature and pressure (SATP): 25°C and 100 kPa, used in some chemistry contexts.

If you are calculating gas volumes for a contract or regulatory report, the governing document will specify the exact base conditions. For general engineering, the difference between 60°F and 15°C can cause about 0.5% error in gas volume calculations, which may be significant for large flows.

Common Mistakes and Misconceptions

One common error is mixing up absolute pressure and gauge pressure. The 14.696 psi in STP is absolute pressure, meaning it includes atmospheric pressure. A typical tire gauge reads gauge pressure, which is zero at atmospheric pressure. So if you measure 14.7 psi on a gauge, the absolute pressure is actually 29.4 psi.

Another mistake is using the wrong temperature scale. The imperial STP temperature of 60°F is not the same as 60°C. Also, when converting to kelvin, remember that kelvin is an absolute scale: 60°F converts to 288.71 K, not 333.15 K (which would be 60°C).

Finally, some people assume that STP is a universal constant, but it is a convention. Different organizations have different standards, and using the wrong one can lead to errors in gas flow calculations, chemical equilibrium problems, and volume conversions.

Comparison of Common Standard Conditions

Here is a quick comparison of the most common standard conditions you may encounter:

  • IUPAC STP (pre-1982): 0°C (32°F), 1 atm (14.696 psi, 101.325 kPa)
  • IUPAC STP (post-1982): 0°C, 100 kPa (14.504 psi)
  • US natural gas STP: 60°F (15.56°C), 14.696 psi (101.325 kPa)
  • International gas STP: 15°C (59°F), 101.325 kPa
  • SATP: 25°C (77°F), 100 kPa

Notice that the pressure in the US imperial STP is exactly 1 atmosphere, which makes it easy to remember. The temperature is the only difference from the metric standard.

Practical Applications and Safety Notes

Knowing the correct STP is essential for:

  • Calculating gas flow rates in pipelines and orifices
  • Converting between standard and actual cubic feet per minute (SCFM vs. ACFM)
  • Determining the volume of a gas at STP from a given mass or moles
  • Calibrating flow meters and gas analyzers

For safety, always use absolute pressure when working with gas laws. If you are using gauge pressure, add the local atmospheric pressure (approximately 14.7 psi at sea level) to get absolute pressure. Also, be aware that at high altitudes, atmospheric pressure is lower, so the “standard” pressure may not match local conditions.

Frequently Asked Questions

What is the difference between STP and NTP?

STP (Standard Temperature and Pressure) usually refers to 0°C and 1 atm, while NTP (Normal Temperature and Pressure) is often 20°C (68°F) and 1 atm. In the US gas industry, STP is 60°F and 14.696 psi. Always check the definition used in your region or industry.

Is 60°F and 14.696 psi the same as 0°C and 1 atm?

No. The pressure is the same (1 atm = 14.696 psi = 101.325 kPa), but the temperature differs: 60°F is 15.56°C, not 0°C. This difference matters when calculating gas volumes because gases expand when heated.

Why do some sources use 14.73 psi instead of 14.696 psi?

14.73 psi is a rounded value that some gas transmission companies use to account for a slightly higher atmospheric pressure or to simplify calculations. It is not an official standard, but it is common in the US natural gas industry. Always use the exact value specified in your contract or regulation.

How do I convert SCFM to ACFM?

To convert standard cubic feet per minute (SCFM) to actual cubic feet per minute (ACFM), use the ideal gas law: ACFM = SCFM × (P_std / P_actual) × (T_actual / T_std), where temperatures are in absolute units (Rankine or Kelvin) and pressures are absolute. For imperial STP, P_std = 14.696 psi and T_std = 60°F + 459.67 = 519.67°R.

Does the imperial STP apply to all gases?

Yes, STP is a set of reference conditions that can be used for any gas, but the specific values may vary by industry. For example, the US gas industry uses 60°F and 14.696 psi for natural gas, but the same conditions can be used for air, nitrogen, or other gases when performing flow calculations.

Related

Formula used
in t | Temperature | °F | 60 | -459.67
in p | Pressure | psi | 14.696 | 0
out p_kpa | Pressure in kPa | kPa | p * 6.894757 | 2
out t_c | Temperature in °C | °C | (t - 32) * 5/9 | 2
out t_k | Temperature in K | K | (t - 32) * 5/9 + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.