Samsung Curved Monitor Stand Removal: What to Check by Model
Removing the stand from a Samsung curved monitor is straightforward for most models, but the exact method depends on your specific model and its release year. Before you begin, check the back of your monitor for the model number (e.g., C32F391, LC27F398, LS34J550), then identify the correct release mechanism—either a push-button release, a screw, or a clip—and always protect the panel by laying it face-down on a soft surface.
Why Stand Removal Differs by Model
Samsung has used several stand attachment methods across its curved monitor lineup. Older models (2015–2018) typically use a simple VESA plate with four screws, while newer models (2019–present) often feature a quick-release button or a tool-less clip. The curvature of the panel means the stand neck is sometimes offset, so the release mechanism may not be centered. Knowing your model series helps you avoid forcing a latch that needs a different approach.
Check 1: Identify Your Model Series
Look for the model number on the back label or in the on-screen menu (Settings → Support → Information). Common series include:
- CF390/CF391/CF398 (2016–2018, 24–27 inch)
- CH711/CH710 (2017–2018, 27–32 inch)
- C32F391/C27F390 (2016–2018, 27–32 inch)
- C27JG50/C32JG50 (2018–2019, 27–32 inch)
- C49J89/C49RG9 (2018–2020, 49 inch super-ultrawide)
- Odyssey G5/G7/G9 (2020–present, 27–49 inch)
Write down the full model number (e.g., LC27F398FWNXZA) because the suffix can indicate a different stand type even within the same series.
Check 2: Look for a Release Button or Latch
Most Samsung curved monitors from 2019 onward have a small button or latch at the bottom of the stand neck, where it meets the monitor. Press it inward while gently pulling the stand downward. On some models, the button is recessed and requires a screwdriver or a pen tip. If you don’t see a button, look for a sliding latch or a small hole that indicates a release pin.
For Odyssey G-series monitors, the button is often on the underside of the stand arm, near the VESA mount. Press it with one hand while supporting the monitor with the other, then slide the stand out horizontally—not vertically.
Check 3: Screw-Based Stands (Older Models)
If your monitor is from 2018 or earlier, it likely uses a screw-based attachment. Turn the monitor face-down on a soft blanket or foam pad. Locate the screws around the VESA mounting plate—usually four Phillips-head screws, but sometimes two or six. Remove them with a suitable screwdriver, then lift the stand off. Keep the screws in a small baggie taped to the back of the monitor so you don’t lose them.
Some older models (like the CF391) also have a locking tab that must be slid to the “unlock� position before the screws can be removed. Check the manual or look for a small arrow and lock icon near the plate.
Check 4: VESA Adapter or Hidden Screws
Some Samsung curved monitors, especially the 49-inch super-ultrawide models, use a VESA adapter plate that is attached to the stand. The stand may come off with the adapter still attached, or the adapter may need to be removed separately. Look for four screws on the adapter that connect it to the monitor—these are usually 10mm or 12mm long. Remove the adapter after the stand is off if you plan to mount the monitor on an arm.
On a few models (e.g., C49J89), there are also two small screws hidden under plastic caps at the bottom edge of the monitor. Pry the caps off gently with a plastic spudger, remove the screws, then the entire stand bracket slides off.
Check 5: Cables and Cable Management
Before removing the stand, detach all cables (HDMI, DisplayPort, power). Many Samsung curved monitors route cables through a channel in the stand neck. If you pull the stand away while cables are still threaded, you can damage the connectors or the port. Unplug everything first, then if the stand has a removable cable cover, take it off to free the wires.
After the stand is off, you may need to re-route cables if you’re using a VESA mount. Some mounts have their own cable management; if not, use velcro ties to keep cables tidy.
Common Mistakes and How to Avoid Them
- Forcing the stand: If it doesn’t release with moderate pressure, you’re likely missing a lock or screw. Stop and re-check the model-specific manual.
- Scratching the screen: Always place the monitor face-down on a clean, soft surface—never on a hard table or on its side.
- Losing screws: Use a magnetic screw tray or a small container. Note which screws go where; they may differ in length.
- Forgetting the VESA adapter: Some models need the adapter removed separately to fit a standard 100x100mm mount.
What to Do If the Stand Won’t Come Off
If you’ve tried the button, latch, and screws and the stand still won’t budge, check for a secondary locking mechanism. Some Samsung models have a small push-tab that must be held in while pulling the stand out—not just pressed. Also, look for a tiny hole near the release button that may require a paperclip to push a hidden catch.
If the stand is stuck due to corrosion or paint, apply a small amount of penetrating oil around the joint (not near the screen) and wait 10 minutes. Never use excessive force or pry with a metal tool—you risk cracking the plastic housing or bending the VESA plate.
Frequently Asked Questions
Do all Samsung curved monitors have a quick-release button?
No. Only models from roughly 2019 onward, primarily the Odyssey series and some 2020+ CJ89/CJ79 models, have a push-button release. Older models (2016–2018) use screws or a sliding latch. Check the back of your monitor for a button or a small lock icon.
Can I remove the stand without taking the monitor off the desk?
It’s possible but risky. You need to tilt the monitor forward to access the release mechanism, which puts stress on the panel and the desk edge. It’s safer to lay the monitor face-down on a soft surface. If you must do it on the desk, have a second person hold the monitor steady.
Will removing the stand void my warranty?
No, removing the stand does not void the warranty, as long as you don’t damage the monitor or strip the screws. Samsung explicitly allows stand removal for VESA mounting. However, if you break a clip or crack the casing, that damage is not covered.
What VESA size do Samsung curved monitors use?
Most use 100x100mm, but some 49-inch models use a custom 200x200mm pattern or a proprietary adapter. Check the manual or the back label for “VESA� specifications. If you see a square bracket with four holes, measure the distance between opposite holes—100mm or 200mm.
Can I use any VESA mount with my Samsung curved monitor?
Yes, as long as the mount supports the monitor’s weight and VESA pattern. Curved monitors are heavier than flat ones due to the glass panel. Check the mount’s weight rating—most 27-inch curved monitors weigh 5–7 kg, while 49-inch models can be 10–15 kg. Also ensure the mount has enough tilt range to accommodate the curvature.
Do I need to remove the stand to wall-mount the monitor?
Yes, wall-mounting requires removing the stand entirely. You’ll also need to remove any VESA adapter plate that came with the monitor. Then attach the wall mount’s bracket directly to the monitor’s VESA holes using the screws provided with the mount (usually M4 or M6).
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.