Required Device Isn’t Connected or Can’t Be Accessed? Fix
This error means Windows or an application cannot detect a device you’re trying to use, such as a printer, USB drive, camera, or external hard disk. The fix is usually to check the physical connection, restart the device and your computer, or update the driver—this article walks through every step in order.
What This Error Actually Means
The message “Required device isn’t connected or cannot be accessed” appears when software expects a hardware device to be present but the operating system cannot see it. This can happen for several reasons:
- The device is unplugged, powered off, or the cable is damaged.
- The USB port or the device’s own connector is faulty.
- The driver is missing, outdated, or corrupted.
- The device is disabled in Device Manager or BIOS/UEFI.
- Windows Update or a recent system change broke the driver.
- The device is in a low-power state and isn’t waking up.
- For network devices, the IP address changed or the firewall blocked it.
You’ll often see this error when launching a specific program (like a scanner utility or a game that needs a controller) or when trying to access a drive in File Explorer. The underlying problem is almost always a connection issue or a driver problem.
First Steps: Physical Check and Reconnection
Start with the simplest fixes—they resolve a surprising number of cases.
- Unplug the device from the computer and from its power source (if it has one). Wait 10 seconds, then plug it back in.
- Try a different cable if you have one. USB and HDMI cables are common failure points.
- Try a different port on your computer. For desktop PCs, use the ports on the back (they’re directly on the motherboard).
- If it’s a USB device, plug it into a USB 2.0 port (often black) instead of a USB 3.0 (blue) port, or vice versa.
- For external drives, check if the drive spins up or shows a light. If not, it may need a powered hub or a different power adapter.
- Restart your computer with the device plugged in. This forces Windows to re-enumerate all connected hardware.
Check Device Manager and Hidden Devices
If the physical connection is fine, the problem may be in how Windows sees the device.
- Press Windows + X and select Device Manager.
- Look for any device with a yellow triangle or a down arrow. Expand categories like Universal Serial Bus controllers, Printers, or Disk drives.
- If you see a device with a down arrow, right-click it and select Enable device.
- If you see a yellow triangle, right-click and select Update driver > Search automatically for drivers.
- If that fails, right-click and select Uninstall device, then restart your computer. Windows will reinstall the driver automatically.
Sometimes the device is not visible at all. In Device Manager, click View > Show hidden devices. Then look under Universal Serial Bus controllers for entries like Unknown Device or USB Device Not Recognized. Right-click and uninstall them, then restart.
Update or Reinstall the Driver
Drivers are the software that lets Windows talk to the hardware. A corrupted or outdated driver is a leading cause of this error.
- Go to the manufacturer’s website for the device (e.g., the printer or external drive maker).
- Find the Support or Downloads section and search for your exact model.
- Download the latest driver for your Windows version (Windows 10/11).
- Run the installer, or in Device Manager, choose Update driver > Browse my computer for drivers and point to the downloaded file.
If you recently updated Windows and the error started, you can try rolling back the driver: in Device Manager, right-click the device, go to Properties > Driver > Roll Back Driver. If that button is grayed out, there’s no previous driver to restore.
Check Power Management and USB Settings
Windows can turn off USB devices to save power, which can cause this error.
- In Device Manager, expand Universal Serial Bus controllers.
- Right-click each entry like USB Root Hub or Host Controller and select Properties.
- Go to the Power Management tab and uncheck “Allow the computer to turn off this device to save power.”
- Click OK and repeat for all USB hubs.
Also check your power plan: go to Control Panel > Power Options > Change plan settings > Change advanced power settings. Under USB settings > USB selective suspend setting, set it to Disabled.
For Network Devices: Printers, Scanners, and NAS
If the device is on your network (like a wireless printer or a network drive), the error often means the computer can’t reach its IP address.
- Make sure the device is powered on and connected to the same Wi-Fi or Ethernet network as your computer.
- Find the device’s IP address (usually on its display or in its settings menu).
- Open Command Prompt and type
ping [IP address]. If you get replies, the device is reachable; if not, check your router or the device’s network settings. - In Windows, go to Settings > Devices > Printers & scanners (or Bluetooth & devices in Windows 11). Remove the device and add it again using “Add a printer or scanner.”
- For network drives, open File Explorer, right-click This PC, and select Map network drive. Enter the correct path (e.g.,
\\192.168.1.10\share).
When Nothing Works: Advanced Troubleshooting
If you’ve tried all the above, the problem may be deeper.
- Run the Hardware and Devices troubleshooter: In Windows 10, go to Settings > Update & Security > Troubleshoot > Hardware and Devices. In Windows 11, use Settings > System > Troubleshoot > Other troubleshooters.
- Check for Windows updates: Go to Settings > Windows Update and install any pending updates, then restart.
- Run CHKDSK if the device is a storage drive: open Command Prompt as administrator and type
chkdsk X: /f(replace X with the drive letter). This checks for file system errors. - Test the device on another computer. If it works there, the problem is with your PC. If it doesn’t, the device itself may be faulty.
- Check the BIOS/UEFI: For internal devices (like a second hard drive), restart your PC and enter the BIOS (usually by pressing Del or F2 during boot). Look for the device in the storage or peripheral settings. If it’s not listed, the hardware may be disconnected or dead.
Frequently Asked Questions
Why does this error appear when I plug in a USB drive?
Most often it’s a driver issue or a power management setting that turns off the USB port. Unplug the drive, restart your PC, and plug it back in. If that fails, update the USB controller drivers or disable USB selective suspend as described above.
Can a faulty cable cause this error?
Yes. A damaged or low-quality cable can break the data connection even if power flows. Try a different cable, preferably a shorter one, and see if the device is recognized.
What if the device works on another computer but not mine?
That points to a problem with your PC’s drivers, USB ports, or system settings. Follow the Device Manager and power management steps. If it’s a network device, check your firewall and network profile (private vs. public).
Is there a way to prevent this error from happening?
Keep your drivers updated, use quality cables, avoid unplugging devices while the computer is writing to them (use “Safely Remove Hardware”), and disable USB selective suspend. Also, avoid using USB hubs for power-hungry devices like external hard drives.
Does this error mean my device is broken?
Not necessarily. It’s a generic Windows message that simply means the device isn’t accessible. Hardware failure is only one possibility, and it’s usually the last thing to check after software and connection issues.
Why does the error appear for a game controller?
Game controllers often need specific drivers or a particular USB port. If you’re using a wireless adapter, make sure it’s plugged in and the batteries are fresh. Also, check if the game needs the controller to be set as the default input device in Windows settings.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.