ThisCalculator

Everyday

Task Manager Details Tab: What It Shows

Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered

The Details tab in Windows Task Manager is the one place where you can see every running process on your system, including background processes and those from other user accounts, along with their exact process ID (PID), CPU and memory usage in real time. If you have been ignoring it for years, you have been missing the most direct way to identify a hung process, find a duplicate instance, or see which process is actually using your disk or network.

Formula

The Details tab itself does not use a formula—it is a live list of processes. But the data it shows is generated by Windows from the same performance counters that feed the Performance tab. The key numbers are:

  • PID: a unique number Windows assigns to each running process. It is reused after a process ends.
  • CPU: the percentage of one core that the process is using, averaged over a short interval.
  • Memory: the private working set, in megabytes, which is the amount of RAM the process has in physical memory.
  • Disk: the total input/output (read and write) in megabytes per second.
  • Network: the current network utilization in megabits per second.

These values are updated about once per second, and the list is sorted by the column you click on.

Worked Example

Suppose you open the Details tab and see a process named MyApp.exe with PID 1234, CPU 25%, Memory 150 MB, Disk 0.1 MB/s, and Network 0.5 Mbps. That means the process is using roughly a quarter of one CPU core, holding 150 MB of RAM, reading or writing 0.1 MB per second, and transferring about 0.5 megabits per second. If you have 8 CPU threads, 25% of one core is about 3% of total CPU capacity. This example is exactly what you would see with the default columns enabled.

What the Details Tab Actually Shows

Unlike the Processes tab, which groups related processes under a single app name and hides many background items, the Details tab lists every process individually. That includes:

  • All apps you have open, each with its own entry.
  • Background processes from Windows itself, drivers, and startup programs.
  • Processes running under other user accounts (if you have multiple users logged in or services running as SYSTEM).
  • Processes that have no visible window, such as updaters, agents, and services.

Each row shows the process name, its PID, status (running or suspended), user name, CPU and memory usage, and—if you add them—disk, network, GPU, and power usage columns. You can right-click any column header to add or remove columns.

Why You Would Use It Instead of the Processes Tab

The Processes tab is designed for casual users: it shows apps and background processes, but it groups things and hides the PID. The Details tab is for when you need exact information. Common reasons to switch:

  • You have two windows of the same app open and you want to close just one instance—each has a different PID.
  • A background process is using high CPU but you cannot find it in the Processes tab because it is hidden under “Windows processes.”
  • You need to kill a process that is not responding, and the End Task button on the Processes tab is grayed out because it is a protected system process.
  • You want to see which process is using your disk or network, and the Processes tab shows only a combined value.
  • You are troubleshooting a program that crashes and you need to match a PID to an error message in the Event Viewer.

How to Use the Details Tab Effectively

To open Task Manager, press Ctrl+Shift+Esc, or right-click the taskbar and choose Task Manager. If you see only a small window with no tabs, click “More details” at the bottom. Then click the Details tab.

  1. Click a column header to sort by that column. Click again to reverse the order.
  2. Right-click a process to see options: End task, End process tree, Set priority, Set affinity, Open file location, and Go to service(s).
  3. Right-click a column header to add or remove columns, such as PID, User name, CPU time, Working set, and more.
  4. Use the search box (if available in your Windows version) to filter by process name.

To end a process, select it and click “End task” in the bottom-right corner, or right-click and choose “End task.” Ending a process tree kills the process and all its child processes. Be careful: ending a system process can cause instability or a crash.

Common Mistakes and Misconceptions

One common misconception is that the CPU column shows the total CPU usage of your whole system. It does not—it shows the percentage for that specific process, and the value can exceed 100% if the process uses multiple cores (on a multi-core CPU, 100% means one full core). Another mistake is assuming that the Memory column shows the total memory the process has allocated. It actually shows the private working set, which is the physical RAM in use, not the virtual memory or the total committed memory.

People also often confuse the Details tab with the Services tab. The Services tab lists Windows services, which are background processes that run without a user interface. The Details tab shows all processes, including services, but also includes user apps. To see which services a process hosts, right-click the process and choose “Go to service(s).”

When a process is suspended, its status shows “Suspended” and it uses almost no CPU. This is normal for background processes that Windows has throttled to save power.

How to Choose What to End

If you are trying to free up memory or fix a hung program, first look at the CPU and Memory columns. A process using 100% CPU for a long time is likely stuck or doing heavy work. A process using several gigabytes of memory might be a memory leak. But before ending anything, check the user name: processes under “SYSTEM” or “Network Service” are part of Windows and ending them can cause problems. Processes under your own user name are usually safe to end, but you will lose unsaved work in that app.

If you are unsure what a process is, right-click it and choose “Open file location” to see the folder it runs from. Legitimate system processes are in C:\Windows\System32. If a process is in your AppData or Temp folder, it may be from a program you installed, but it could also be malware. You can search the process name online, but be aware that some malware uses the same names as legitimate processes.

Limits and What It Does Not Show

The Details tab does not show the full command line of a process, the parent process, or the path to the executable. To get that information, you would need to use a tool like Process Explorer or the command line wmic or PowerShell. Also, the CPU and memory values are instantaneous, not historical, so you cannot see a graph of a process’s usage over time—that is on the Performance tab.

The Details tab also does not show per-process GPU usage by default. You can add the GPU column, but it only shows the dedicated GPU memory usage and the GPU engine, not the utilization percentage. For detailed GPU monitoring, you would need to use the Performance tab or a third-party tool.

Finally, the Details tab is not available in Windows 7’s Task Manager. Windows 7 has a Processes tab that is similar but less detailed. The Details tab was introduced in Windows 8 and remains in Windows 10 and 11.

Frequently Asked Questions

How do I add more columns to the Details tab?

Right-click any column header (like PID or CPU) and a list of available columns appears. Check the ones you want, such as Disk, Network, GPU, or Command line (if available). The new columns will appear immediately. You can also drag columns to reorder them.

Why does the CPU column show more than 100%?

Because the percentage is relative to one CPU core. If your processor has 8 threads, a process using all of them will show 800%. This is normal and does not mean the process is broken. To see total CPU usage, look at the Performance tab.

What is the difference between ending a task and ending a process tree?

Ending a task kills the selected process only. Ending a process tree kills the selected process and every child process it started. For example, if a browser has several helper processes, ending the tree closes all of them. Use this when a program has spawned multiple processes that you want to stop together.

Can I restart a process from the Details tab?

No, there is no restart option. You have to end the process and then start the application again. For services, you can use the Services tab to restart them. For apps, just launch the program again from the Start menu or desktop.

Is it safe to end a process under the SYSTEM user?

Usually not. SYSTEM processes are essential to Windows. Ending one can cause a crash, a blue screen, or make some features stop working. If you are trying to fix a problem, first try ending processes under your own user name. If you must end a SYSTEM process, be prepared to restart the computer.

Why can’t I see the Details tab on my computer?

If you are using Windows 7, there is no Details tab. On Windows 8 and later, if you have opened Task Manager in “Fewer details” mode, you only see the Processes tab. Click “More details” at the bottom to expand the full window with all tabs.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.