ThisCalculator

Everyday

Printer Status Paused: Cannot Resume? Fix It Now

Updated · Standard formula, shown below

If your printer shows “Paused” and clicking “Resume” doesn’t work, the fix usually involves clearing the print queue, restarting the print spooler service (on Windows), or checking the printer’s own front-panel menu. This article explains why printers get stuck in this state and gives you step-by-step fixes that work for most brands and models.

Why Printers Get Stuck on Paused

Printers pause for a variety of reasons, and the “Resume” button sometimes fails because the underlying cause isn’t a simple user action. Common triggers include:

  • An empty or jammed paper tray – the printer pauses to protect itself.
  • A low or empty ink/toner cartridge – many models pause rather than print blank pages.
  • A corrupted print job stuck in the queue – the printer waits for a file that will never arrive.
  • The print spooler service (Windows) has crashed or stopped.
  • A paper jam that wasn’t fully cleared – a tiny scrap can keep the sensor tripped.
  • A USB or network connection that dropped mid-job.

When you click “Resume” on your computer, the command goes to the printer driver and then to the printer. If the printer’s own firmware is waiting for a physical condition (like a closed cover or a sensor), it will ignore the software command.

Quick Fixes to Try First

Before diving into advanced troubleshooting, try these simple actions. They resolve a surprisingly large number of paused-printer cases.

  1. Check the printer’s front panel. Look for a blinking light or an error message. Open and close the paper tray, the scanner lid, and the rear access door. This resets the sensors.
  2. Press the “Resume” or “Cancel” button on the printer itself (not on your computer). Many printers have a dedicated button with a triangle-and-line icon. Hold it for 3–5 seconds.
  3. Turn the printer off, wait 30 seconds, and turn it back on. This clears the printer’s internal memory and often clears the paused state.
  4. Remove all paper from the tray, then reload it. Fan the paper first to prevent double-feeding.
  5. Check ink/toner levels. If a cartridge is empty, replace it. Some printers refuse to resume until the cartridge is changed.

If none of these work, the problem is likely in the software or the print queue on your computer.

How to Clear the Print Queue (Windows)

On Windows, the print queue is managed by a background service called the Print Spooler. When a job gets stuck, it can block all subsequent jobs and make the printer appear paused. Here’s how to clear it completely:

  1. Press Windows + R, type services.msc, and press Enter.
  2. Scroll down to Print Spooler. Right-click it and select Stop.
  3. Open File Explorer and navigate to C:\Windows\System32\spool\PRINTERS. Delete all files in that folder. (If the folder is empty, that’s fine.)
  4. Go back to the Services window, right-click Print Spooler again, and select Start.
  5. Now open your print queue (Settings > Bluetooth & devices > Printers & scanners > your printer > Open print queue). It should be empty. Try printing a test page.

If the spooler won’t stop or start, you may need to run the same steps in Safe Mode, or check for a third-party print management tool that’s interfering.

How to Clear the Print Queue (macOS)

On a Mac, the process is simpler but similar in principle:

  1. Open System Settings > Printers & Scanners.
  2. Select your printer in the list.
  3. Click Print Queue (or “Open Print Queue”).
  4. Click the X next to each stuck job to cancel it. If that doesn’t work, click Pause Printer (to pause it), then Resume Printer.
  5. If jobs still won’t cancel, restart your Mac. The queue is stored in memory and will clear on reboot.

On macOS, you can also try deleting the printer and re-adding it: right-click the printer in System Settings, choose Remove Printer, then click Add Printer and re-select it. This resets the driver connection without reinstalling the driver itself.

Resume Button Grayed Out or Unresponsive

If the “Resume” button in your print dialog is grayed out, it usually means the printer is not communicating with the computer at all. Check the following:

  • Connection: If USB, try a different port or cable. If network, check that the printer’s IP address hasn’t changed (print a network configuration page from the printer’s menu).
  • Driver: Open Device Manager (Windows) and look for a yellow exclamation mark next to your printer. If present, right-click and select “Update driver” or reinstall the driver from the manufacturer’s website.
  • Offline mode: Windows sometimes sets a printer to “Use Printer Offline” automatically after a connection error. Right-click the printer in Settings > Printers & scanners, and uncheck “Use Printer Offline” if it’s checked.
  • Firewall/antivirus: For network printers, a firewall can block the communication. Temporarily disable it to test, then add an exception.

If the printer is connected via Wi-Fi, try moving it closer to the router or restarting the router. A weak signal can cause the printer to drop mid-job and then pause.

When the Printer Itself Is the Problem

Sometimes the issue is internal to the printer. Here are the most common hardware-related causes and what to do:

  • Paper jam not fully cleared: Open every access door (front, rear, and duplexer if present). Look for torn bits of paper, especially around rollers. Use a flashlight.
  • Open cover or door: Even if a door looks closed, a sensor may be stuck. Firmly press on all doors and trays until you hear a click.
  • Waste ink tank full: Some inkjet printers pause when the internal waste ink counter reaches a limit. This often requires a reset tool or service center visit.
  • Firmware bug: Check the manufacturer’s website for a firmware update. Some models have had known bugs that cause the paused state after a certain number of pages.

If you’ve tried all software fixes and the printer still shows “Paused” on its own display, the issue is almost certainly hardware. Consult the printer’s manual or contact the manufacturer’s support (they often have a diagnostic tool you can download).

Preventing Future Paused States

Once you’ve fixed the issue, a few habits can reduce the chances of it happening again:

  • Always use the “Cancel” button on your computer to cancel a print job – don’t just turn off the printer.
  • Keep the paper tray filled, but not overfilled, and use paper that isn’t curled or damp.
  • Update your printer driver and firmware regularly.
  • If you print over Wi-Fi, use a static IP address for the printer in your router’s settings.
  • For a printer that sits idle for weeks, print a test page once a week to keep ink from drying out (inkjets) or to prevent rollers from flattening (laser).

A paused printer is rarely a sign of a dying machine – it’s usually a minor hiccup in the queue or a sensor that needs a nudge. The steps above cover about 95% of cases.

Frequently Asked Questions

Why does my printer say “Paused” even after I resume it?

The printer is likely waiting for a physical condition to be met – a closed door, a paper sensor that’s still blocked, or an empty tray. Check the printer’s own display for an error code. If none appears, the print queue on your computer may have a corrupted job that keeps re-pausing the printer. Clear the queue as described above.

How do I delete a stuck print job?

On Windows, stop the Print Spooler service, delete the files in C:\Windows\System32\spool\PRINTERS, then restart the service. On macOS, open the Print Queue window and click the X next to the job. If it won’t delete, restart your computer – the queue is cleared on reboot.

Can a paused printer damage the printer?

No. A paused state is a protective feature – it stops the printer from doing something unsafe, like printing with a jammed roller or an empty cartridge. Leaving it paused for days is fine; just don’t force it to print while a jam is present.

Why does my printer keep pausing on its own?

This usually points to a recurring physical issue: a paper feed problem (worn rollers), a low ink/toner level, or a flaky network connection. Check the printer’s event log (if available) or the manufacturer’s status monitor on your computer. If it’s always the same job that causes the pause, that file may be corrupt – try printing a different document.

Is there a way to pause and resume from the command line?

On Windows, you can use PowerShell to manage print jobs: Get-Printer lists printers, Get-PrintJob -PrinterName "Your Printer" shows jobs, and Remove-PrintJob -PrinterName "Your Printer" -ID 1 removes a specific job. On macOS, the cupsenable and cupsdisable commands (run in Terminal) can resume or pause a printer, but they require admin rights.

What if my printer is paused and the resume button is not on the screen?

If you don’t see a resume option, the printer may be set to “Offline” or “Disconnected” in your system. Go to your printer settings, right-click the printer, and select “Use Printer Online” (Windows) or check that it’s not paused in System Settings (macOS). If it’s a network printer, verify the IP address hasn’t changed – you may need to re-add the printer.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.