3D Printed Objects: What Only Exists via Printing
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
Some objects can only exist because of 3D printing—they are geometrically impossible to make with traditional machining, molding, or casting. These include fully interlocked chains printed in one piece, lattice structures with internal voids, and patient-specific implants with porous surfaces that match a person’s exact anatomy. Below, we explore what makes these objects unique, how the technology achieves them, and what you should know if you want to create your own.
What Makes an Object “Only 3D Printable”?
Traditional manufacturing methods like injection molding or CNC machining remove material from a solid block or force it into a mold. That means you cannot create a closed hollow sphere with a smaller opening, a chain with links that are already interlocked, or a part with internal channels that bend at right angles. 3D printing builds objects layer by layer from a digital model, so it can produce geometries that are physically impossible to subtract or mold. The key difference is that the printer deposits material exactly where the design specifies, even inside the part, without needing access from the outside.
Common examples of such “impossible” objects include:
- Interlocking chains and nested cubes – printed as a single piece with no assembly.
- Lattice structures – repeating open-cell patterns used in lightweight aerospace parts and shoe midsoles.
- Internal cooling channels – curved or branched channels inside a metal part that cool a mold or engine component.
- Patient-specific implants – porous titanium bone replacements that mimic the trabecular structure of natural bone.
- One-piece hinges and mechanisms – like a working ball-and-socket joint printed without assembly.
How 3D Printing Enables These Geometries
All 3D printing processes work from a digital 3D model, usually an STL or 3MF file, which is sliced into thin cross-sections. The printer then deposits or fuses material layer by layer. Because each layer is built from scratch, the printer can create overhangs, undercuts, and internal voids that would trap a cutting tool or require a mold that cannot be opened.
For example, fused deposition modeling (FDM) extrudes molten plastic through a nozzle. To print an overhang, the printer adds a temporary support structure that is removed later. Stereolithography (SLA) uses a laser to cure liquid resin, and the resin itself supports the part, so it can print very fine details. Powder-bed fusion methods like selective laser sintering (SLS) or metal laser melting use a bed of powder; the unsintered powder acts as a natural support, allowing complex internal channels and moving parts to be printed in one go.
The critical limitation is that the printer cannot print into empty space. Every layer must be supported by the layer below it, either by the part itself, by support material, or by the powder bed. Designers use this principle to decide which geometries are feasible.
Examples of Objects That Only Exist via 3D Printing
Some of the most striking examples come from art and engineering:
- Interlocked chain – a single print where every link passes through its neighbor. You cannot assemble it afterward because the links are closed loops.
- Möbius strip with a twist – a continuous loop with a half-twist, printed as a single surface.
- Gyroid lattice – a triply periodic minimal surface that divides space into two interpenetrating channels. It appears in heat exchangers and lightweight structural panels.
- Bionic knee implant – a titanium implant with a porous outer layer that encourages bone ingrowth, shaped exactly to a patient’s CT scan.
- Rocket engine injector – a metal part with dozens of internal fuel channels that mix propellants efficiently; NASA has tested such injectors.
These objects are not just difficult to make traditionally—they are impossible because no tool can reach inside a closed cavity, and no mold can be pulled apart to release an interlocked shape.
How to Design and Print Your Own Impossible Object
If you want to create such an object, follow these steps:
- Choose a 3D modeling program that supports boolean operations and mesh editing (e.g., Blender, Fusion 360, or Tinkercad).
- Design the geometry with the printer’s limitations in mind. For FDM, avoid overhangs steeper than 45° unless you use supports. For resin or powder printers, you have more freedom.
- Export as STL or 3MF and check for errors with a slicer’s repair tool.
- Set up supports if needed. For interlocking parts, consider printing at an angle so that supports can be removed.
- Print and post-process – remove supports, sand, or clean as required.
A good starting project is a simple interlocking chain or a hollow sphere with a small opening. You will quickly see how the layer-by-layer process makes the impossible possible.
Common Problems and Misconceptions
One common misconception is that 3D printing can create any shape without supports. In reality, FDM printers need supports for overhangs, and those supports can be hard to remove from delicate geometries. Another issue is that internal channels may collapse if the layer height is too large or the channel is too narrow. For metal printing, residual stress can cause warping.
Another myth is that “3D-printed” means “low quality.” In aerospace and medical fields, printed parts are often stronger than cast ones because the layer-by-layer fusion can be optimized. However, the layer lines create anisotropy—parts are weaker in one direction than another. Designers must orient the part so that the highest stress is along the strongest axis.
Finally, many people think that all 3D printers are the same. In reality, FDM, SLA, SLS, and metal printers differ hugely in cost, resolution, and material properties. The object you want to make will dictate the technology you need.
Costs and Materials
The cost of printing an impossible object varies widely. FDM printers and filaments are affordable, but the layer resolution is coarse. Resin printers produce finer details but the resin is more expensive and requires post-curing. Industrial SLS and metal printers cost tens of thousands of dollars, and the materials (e.g., titanium powder) are costly. For a hobbyist, a simple interlocked chain might cost a few dollars in plastic; for a medical implant, the cost is in the thousands due to certification and material.
Materials also matter: PLA is easy to print but brittle; ABS is tougher but warps; nylon is strong and flexible; resin offers high detail; titanium and aluminum are used for functional metal parts. Each material has its own support and post-processing requirements.
Safety and Accuracy Considerations
When printing, always follow the manufacturer’s safety guidelines. FDM printers heat the nozzle to 200–260°C, which can cause burns. Resin printers use photopolymers that are skin irritants—wear gloves and work in a ventilated area. Metal printing involves fine metal powder that is flammable and toxic if inhaled; only trained professionals should use those systems.
Accuracy is also crucial. Layer height affects surface finish and dimensional precision. A typical FDM printer has a tolerance of ±0.2 mm, while resin printers can achieve ±0.05 mm. For objects that must fit together, like a chain, design clearance of at least 0.3 mm between links to avoid fusing.
Alternatives to 3D Printing
If you need a similar object but 3D printing is not available, consider these alternatives:
- Investment casting – you can 3D print a wax pattern, then cast it in metal, but the pattern must be removable.
- CNC machining – only works for shapes accessible by cutting tools.
- Injection molding – for mass production, but the mold must open, so undercuts are limited.
- Assembly – print separate parts and join them, but interlocked shapes cannot be assembled.
For truly impossible geometries, 3D printing is the only practical method. For other shapes, traditional methods may be cheaper and faster.
Frequently Asked Questions
Can any 3D printer print an interlocked chain? Yes, but FDM printers may need supports for the overhangs. Resin and powder printers can often do it without supports because the material supports itself.
Why are internal channels hard to print? Because the channel roof is an overhang. If the channel is too wide, it will sag. Using a small layer height and adding supports inside the channel can help, but removing supports from a narrow channel is difficult.
Is 3D printing stronger than injection molding? Not generally. Injection molded parts are isotropic and have no layer lines, so they are stronger in all directions. However, 3D printing can produce optimized lattice structures that are lighter and sometimes stronger per weight.
What is the cheapest way to try printing an impossible object? Use an FDM printer with PLA filament. Design a simple chain or a hollow cube with a hole. PLA is inexpensive and easy to print.
Can I print a part with moving parts inside? Yes, if there is enough clearance. For example, a bearing with balls inside a race can be printed in one piece if the balls have a gap of at least 0.3 mm.
Do I need a special slicer for these objects? Most slicers handle them, but you may need to adjust support settings and layer height. Some slicers have “print in place” presets for moving parts.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.