ThisCalculator

Everyday

Set Custom Difficulty on Arma 3 Dedicated Server

Updated · Standard formula, shown below

This guide walks you through setting a custom difficulty on your Arma 3 dedicated server, so you can fine-tune the gameplay experience for yourself and your community. You’ll learn how to edit the server’s configuration file to control settings like third-person view, crosshairs, and AI skill, then apply those changes. Before you begin, make sure you have access to the server’s file system (via FTP or a control panel) and that your server is stopped to avoid file conflicts.

What You’ll Need

  • Access to the Arma 3 dedicated server’s root directory (where the executable and config files are located).
  • A text editor like Notepad++ or Visual Studio Code (avoid plain Notepad for large files).
  • The server must be stopped while editing the configuration file.
  • Basic understanding of Arma 3’s difficulty parameters (optional but helpful).

Step-by-Step

  1. Locate the server configuration file. On a typical dedicated server, this is a file named server.cfg or serverDZ.cfg (for DayZ mods). It’s usually in the same folder as the server executable (e.g., arma3server.exe). If you’re using a hosting panel, look for a “Config Editor” or “Server Settings” section.
  2. Open the file in a text editor. Right-click the file and choose “Edit” or open it via your editor’s File menu. If the file doesn’t exist, you can create a new one with that name—the server will read it on startup.
  3. Find the difficulty section. Look for a line like class Missions or class Difficulty. In many default configs, you’ll see something like:
    class Missions
    {
    class Mission1
    {
    difficulty = "Custom";
    };
    };

    If it’s not there, you can add it.
  4. Set the difficulty to “Custom”. Change the difficulty value to "Custom" (case-sensitive). This tells the server to use your custom settings instead of predefined presets like “Recruit” or “Veteran”.
  5. Define your custom difficulty parameters. Add a class CustomDifficulty block. Here’s an example with common settings:
    class CustomDifficulty
    { class Options
    { thirdPersonView = 0; // 0 = disabled, 1 = enabled reducedDamage = 0; // 0 = normal, 1 = reduced groupIndicators = 0; // 0 = never, 1 = limited, 2 = always friendlyTags = 0; // 0 = never, 1 = limited, 2 = always enemyTags = 0; // 0 = never, 1 = limited, 2 = always detectedTags = 0; // 0 = never, 1 = limited, 2 = always weaponCrosshair = 0; // 0 = off, 1 = on visionAid = 0; // 0 = off, 1 = on mapContent = 0; // 0 = limited, 1 = full autoReport = 0; // 0 = off, 1 = on deathMessages = 0; // 0 = off, 1 = on netStats = 0; // 0 = off, 1 = on squadRadar = 0; // 0 = off, 1 = on tacticalPing = 0; // 0 = off, 1 = on weaponInfo = 0; // 0 = off, 1 = on staminaBar = 0; // 0 = off, 1 = on }; class AILevelPreset
    { skillAI = 0.5; // 0 to 1, higher = better AI precisionAI = 0.5; // 0 to 1, higher = more accurate }; };

    Adjust the values to your preference. The numbers are mostly 0 or 1, but some like groupIndicators accept 0, 1, or 2.

  6. Save the file. Use Ctrl+S (or Cmd+S on Mac) to save your changes. Ensure the file is saved with the same name and encoding (usually UTF-8 without BOM).
  7. Restart the server. Start the server again. It will read the new configuration. You can verify the difficulty by joining the server and pressing ESC—the difficulty name should show “Custom”.

Common Mistakes

  • Forgetting to set difficulty to “Custom”. If you leave it as “Veteran” or another preset, your custom block will be ignored.
  • Syntax errors. Missing semicolons or braces can cause the server to fail to start. Always double-check your brackets and semicolons.
  • Using the wrong file. Some hosts use server.cfg while others use serverDZ.cfg or a mission-specific config. Make sure you’re editing the one the server actually reads.
  • Not stopping the server. Editing files while the server is running can lead to overwritten changes or file locks.
  • Incorrect parameter names. Misspelling a parameter (e.g., thirdPerson instead of thirdPersonView) will cause it to be ignored without an error.

Tips

  • Test your settings on a local or test server first before applying to a live server.
  • Keep a backup of your original config file before making changes.
  • Use a validation tool like the Arma 3 Config File Checker (available online) to catch syntax errors before starting the server.
  • If you want to use a preset as a base, copy the preset’s values from the game’s difficulty settings menu and paste them into your custom block.
  • Remember that some mods override difficulty settings—check your mod list if things seem off.

Troubleshooting

  • Server won’t start after editing. Check the server log file (usually server_console.log or similar) for errors. Look for lines mentioning “config” or “difficulty”. The most common cause is a missing semicolon or brace.
  • Difficulty still shows as “Veteran” in game. This means the server isn’t reading your custom block. Verify that you set difficulty = "Custom"; in the mission class. Also, ensure the file is saved in the correct location and the server is restarted.
  • Some settings don’t apply. Certain settings may be overridden by the mission’s description.ext file. Check if your mission has a difficulty setting there and adjust accordingly.
  • Server starts but kicks clients. If you set thirdPersonView = 0 and clients have it enabled in their own settings, they may get kicked. This is normal—they need to adjust their client settings to match.
  • Changes don’t appear after restart. Some hosts use a separate config file for difficulty. Search for files like basic.cfg or server.cfg in the root folder and check if another file contains difficulty settings.

Frequently Asked Questions

Can I use the same custom difficulty for all missions on the server?

Yes, you can set the difficulty in the server config’s class Missions block, which applies to all missions. Alternatively, you can set it per-mission in the mission’s description.ext, but the server config takes priority.

What is the difference between “Custom” and presets like “Veteran”?

Presets are fixed sets of options. “Custom” allows you to define your own combination. When you set difficulty to “Custom”, the server reads your CustomDifficulty block instead of a preset.

How do I make AI more challenging?

Increase skillAI and precisionAI values up to 1.0. Higher values make AI react faster and shoot more accurately. You can also adjust AI skill per unit in the mission editor, but the server-level setting is a global baseline.

Why are my custom settings ignored when a mod is active?

Some mods, especially gameplay overhauls, may override difficulty settings. Check the mod’s documentation for compatibility, or try disabling mods temporarily to see if your settings apply.

Can I change difficulty without restarting the server?

No, the server reads the config only at startup. You must restart the server to apply changes.

Is it possible to set different difficulties for different player slots?

No, difficulty is a server-wide setting. Individual players can adjust their client-side settings (like crosshair) but the server enforces the core difficulty parameters.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.