ThisCalculator

Everyday

Evaluating Modular Data Centers for AI Workloads

Updated · Standard formula, shown below

This guide walks you through the key technical and operational factors to consider when evaluating a modular data center for AI workloads. You’ll learn how to assess power density, cooling, networking, scalability, and total cost of ownership (TCO) so you can choose a solution that matches your AI performance, budget, and deployment timeline.

What You’ll Need

  • A clear definition of your AI workload: training vs. inference, model size, and expected throughput.
  • Power and cooling requirements for your target GPUs or accelerators (from vendor specs).
  • Physical site details: available space, utility power capacity, and environmental conditions.
  • Network topology requirements (e.g., InfiniBand, 400GbE) and latency expectations.
  • A budget range that includes capex (hardware, construction) and opex (power, cooling, maintenance).
  • Timeline for deployment and any regulatory or compliance constraints.

Step-by-Step

  1. Define your AI workload characteristics. Determine whether you’re doing training, inference, or both. Note the number of GPUs, their power draw per unit, and whether you need low-latency inter-GPU communication (e.g., NVLink, InfiniBand). This drives the required power density per rack and network fabric.
  2. Calculate total power and cooling capacity. Multiply the number of accelerators by their peak power draw, add overhead for CPUs, memory, storage, and networking. For example, 8x H100 GPUs at 700W each equals 5.6kW per server, plus ~20% overhead gives ~6.7kW per server. A rack with 4 such servers needs ~27kW. Ensure the modular unit can support that density and the cooling method (air vs. liquid) matches your GPUs’ cooling requirements.
  3. Evaluate cooling architecture. AI GPUs often require liquid cooling for sustained performance. Check if the modular data center supports direct-to-chip liquid cooling or rear-door heat exchangers. For air-cooled systems, verify the module’s airflow design (hot/cold aisle containment) and that it can handle the heat load without derating the GPUs.
  4. Assess network fabric and scalability. AI training clusters need high-bandwidth, low-latency networks. Confirm the modular unit supports the required switch topology (e.g., fat-tree, dragonfly) and cabling (e.g., 400GbE, InfiniBand NDR). Check if the module can be expanded by adding more units without major network redesign.
  5. Review physical footprint and site readiness. Measure the available space and ensure the modular unit’s footprint (including service clearance) fits. Verify that the site’s utility power can deliver the required capacity, or plan for on-site generation. Check for any height, weight, or access restrictions for delivery.
  6. Analyze total cost of ownership (TCO). Compare upfront costs (unit, installation, site prep) and ongoing costs (power, cooling, maintenance, staffing). Include the cost of idle capacity if you overprovision. Use a simple model: TCO = capex + (power cost + cooling cost + maintenance) × expected lifespan. For AI, also factor in the cost of downtime due to cooling failures.
  7. Test with a proof-of-concept (POC). If possible, run a small-scale workload on the vendor’s reference architecture. Measure GPU utilization, temperature, and power draw under load. Verify that the cooling system maintains safe temperatures without throttling.
  8. Check compliance and certifications. Ensure the modular unit meets local building, electrical, and fire safety codes. Look for certifications like UL, CE, or TIA-942 (tier level). If you handle sensitive data, verify that the unit can support required physical security measures.
  9. Plan for maintenance and support. Ask about service contracts, spare parts availability, and remote monitoring capabilities. AI workloads run 24/7, so the module should have redundant cooling and power (N+1 or 2N) to avoid costly interruptions.
  10. Make a decision based on a weighted scorecard. Create a matrix with criteria like performance, scalability, cost, deployment speed, and vendor support. Assign weights based on your priorities, score each option, and select the highest total.

Common Mistakes

  • Underestimating power density. Many modular units are designed for 5-15kW per rack, but AI racks can exceed 30kW. Failing to match this leads to overheating or the need for costly retrofits.
  • Ignoring cooling method compatibility. Air-cooled modules may not support high-density GPUs that require liquid cooling. Always verify the GPU’s cooling requirements against the module’s capabilities.
  • Overlooking network latency. For distributed training, even microsecond differences in latency can impact performance. Ensure the module’s network design supports your required topology.
  • Forgetting about power distribution. The module’s electrical panel must support the required voltage and amperage. Check for adequate circuit breakers and phase configuration.
  • Not accounting for future growth. AI workloads scale quickly. Choose a module that allows adding racks or computing nodes without replacing the entire system.
  • Focusing only on upfront cost. A cheaper unit may have higher operating costs due to inefficient cooling or more frequent maintenance. Calculate TCO over 5-10 years.

Tips

  • Always ask for the module’s power usage effectiveness (PUE) at full load. A PUE below 1.3 is good for AI workloads.
  • Consider using a modular data center that supports both air and liquid cooling to future-proof for next-gen GPUs.
  • Negotiate for a remote monitoring dashboard that shows real-time power, temperature, and humidity metrics.
  • Verify that the module’s fire suppression system is suitable for electrical fires (e.g., inert gas, not water).
  • If deploying outdoors, check the unit’s weatherproofing and insulation for your climate.
  • Plan for spare parts and have a maintenance contract with a guaranteed response time.

Troubleshooting

Issue: GPUs are throttling due to high temperatures.
Check the cooling system’s setpoints and airflow. Ensure the hot/cold aisle containment is properly sealed. If the module uses air cooling, verify that the ambient temperature is within spec. If throttling persists, you may need to reduce the number of GPUs per rack or switch to liquid cooling.

Issue: Power distribution trips a breaker.
Calculate the total load and compare to the breaker rating. If you’re near the limit, redistribute loads across phases or reduce the number of servers. Check for any faulty power supplies.

Issue: Network latency is higher than expected.
Verify that the network cables are properly seated and that the switch configuration matches your topology. Use a network analyzer to identify bottlenecks. Ensure that the module’s internal cabling doesn’t introduce excessive distance.

Issue: The module doesn’t fit on site.
Re-measure the delivery path, including doorways and corners. If the module is too large, consider a split design or a different site. Check weight limits for the floor and any lifts.

Frequently Asked Questions

Q: What is the typical power density for AI racks in modular data centers?
A: AI racks with 8 GPUs can draw 20-40kW per rack. High-density configurations with liquid cooling can exceed 50kW per rack.

Q: Can I retrofit an existing modular data center for AI?
A: Possibly, but you’ll need to upgrade power distribution and cooling. Often, it’s more cost-effective to deploy a new module designed for AI.

Q: How long does it take to deploy a modular data center for AI?
A: Deployment can take 12-20 weeks from order to operation, depending on site prep and customization. This is faster than traditional construction.

Q: What is the difference between air and liquid cooling for AI?
A: Air cooling is simpler but limited to about 20-30kW per rack. Liquid cooling can handle 50kW+ and is more energy-efficient for high-density AI workloads.

Q: Do I need special permits for a modular data center?
A: Yes, you still need building permits and electrical inspections. Some jurisdictions have specific requirements for outdoor units.

Q: How do I estimate the total cost of ownership?
A>Include the module cost, site prep, power and cooling costs (using your local utility rate), maintenance, and staffing. For AI, also consider the cost of GPU idle time due to downtime.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.