Feet to Acre Conversion Calculator & Formula
- Square yards
- yd²
- Result
- Square meters
- m²
- Result
- Square feet
- 87120 ft²
- You entered
This calculator converts an area measured in square feet into acres. You enter the number of square feet, and it returns the equivalent area in acres, along with the result in square yards and square meters for reference. The conversion uses the standard U.S. survey definition where 1 acre equals 43,560 square feet.
Formula
The conversion from square feet to acres is a simple division:
Acres = Square feet ÷ 43,560
Where:
- Square feet (ft²) is the area you want to convert.
- 43,560 ft² is the exact number of square feet in one acre.
This number comes from the definition of an acre: 1 acre = 1 chain × 1 furlong. A chain is 66 feet, and a furlong is 660 feet, so 66 × 660 = 43,560 ft². That is the legal definition used in the United States for land measurement.
Worked Example
Using the default value of 87,120 square feet:
- Divide 87,120 by 43,560: 87,120 ÷ 43,560 = 2.
- The result is exactly 2 acres.
So 87,120 ft² equals 2 acres. The calculator shows this as 2.0000 acres, and also gives the equivalent in square yards (9,680 yd²) and square meters (8,093.71 m²).
Why 43,560? A Quick History
The acre is an old unit that dates back to medieval England. Originally, it was the amount of land a yoke of oxen could plow in one day. Over time it became standardized. The modern U.S. definition comes from the International Yard and Pound Agreement of 1959, which set 1 acre = 4,046.8564224 square meters, which is equivalent to 43,560 square feet exactly. This is the value used by the U.S. Public Land Survey System and by virtually all real estate transactions in the United States.
It is worth noting that there is also a slightly different unit called the “survey acre” used in some legal descriptions, which is about 4,046.8726 square meters. The difference is tiny (about 0.016 square meters per acre), but for precise legal work, surveyors may use the survey foot. For everyday land measurement and real estate, the standard 43,560 ft² is what you should use.
How to Use the Calculator
Using the calculator is straightforward:
- Enter the area in square feet in the first box. You can type any non-negative number.
- The first output, Acres, appears immediately. It is the main answer.
- The second and third outputs give the same area in square yards and square meters, which can be useful if you are comparing with other listings or maps.
For example, if you have a rectangular lot that is 150 feet by 200 feet, the area is 30,000 ft². Enter 30000 in the calculator. The result is 0.6887 acres (about 0.69 acres). That is a typical suburban lot size.
Common Mistakes and How to Avoid Them
People often make a few errors when converting feet to acres:
- Mixing up square feet and feet: An acre is an area, not a length. You cannot convert linear feet to acres directly. You must have an area in square feet (or multiply length × width in feet to get square feet first).
- Using the wrong conversion factor: Some people use 43,560 but forget to divide, or they use 4,840 (square yards per acre) when they have square yards. Always check the units.
- Rounding too early: If you are doing multi-step calculations, keep full precision until the end. Round only the final answer.
- Confusing acres with hectares: A hectare is 10,000 m², which is about 2.471 acres. They are not the same. If you are working with metric units, convert to square feet first or use a different formula.
Real-World Examples and Use Cases
Here are a few situations where you might need this conversion:
- Real estate listings: A lot is advertised as 10,890 square feet. To know the acreage, divide by 43,560: 10,890 ÷ 43,560 = 0.25 acres (a quarter-acre lot).
- Agriculture: A field measures 660 feet by 660 feet. That is 435,600 ft², which is exactly 10 acres. This is a common size for a square field because 660 feet is one furlong.
- Construction: A building footprint is 50,000 ft². That is about 1.15 acres. This helps in estimating land coverage and parking requirements.
- Gardening: A community garden plot of 2,000 ft² is about 0.046 acres, or roughly one-twentieth of an acre.
The calculator works for any size, from tiny residential lots to large tracts of land. It also works for irregular shapes as long as you already know the total area in square feet.
How to Convert Manually Without a Calculator
If you need to do the conversion by hand, the steps are simple:
- Measure the length and width of the area in feet.
- Multiply length × width to get square feet.
- Divide that number by 43,560.
For example, a rectangular parcel that is 300 feet by 400 feet has an area of 120,000 ft². Dividing by 43,560 gives 2.7548 acres. You can round to 2.75 acres for most purposes.
If you have an irregular shape, break it into rectangles, triangles, or circles, calculate each area in square feet, sum them, then divide by 43,560.
Limitations and Precision
This conversion is exact under the standard definition, but the accuracy of your result depends on how accurately you measure the square footage. If you measured in feet and inches, convert inches to decimal feet (e.g., 6 inches = 0.5 ft) before multiplying. Also, for very large areas, you might want to use acres directly rather than square feet to avoid huge numbers.
The calculator gives up to 4 decimal places for acres, which is more precise than most real estate transactions need (usually 2 or 3 decimal places). For legal descriptions, surveyors use more precise measurements and may use the survey foot, but for everyday use, the standard 43,560 ft² per acre is accurate enough.
Frequently Asked Questions
How many square feet are in an acre?
Exactly 43,560 square feet. This is the standard U.S. definition and is the same in the imperial system. It comes from the historical definition of an acre as one chain by one furlong (66 ft × 660 ft).
How do I convert square feet to acres in Excel?
In Excel, you can use the formula =A1/43560 where A1 contains the square footage. For example, if cell A1 has 87120, the formula returns 2. You can also use the CONVERT function: =CONVERT(A1,”ft2″,”ac”) but note that Excel’s CONVERT function may require the unit codes to be in quotes and may not recognize “ac” in all versions. The division method is simpler and always works.
Is an acre bigger than a square foot?
Yes, an acre is much larger. One acre is 43,560 square feet. To visualize, an acre is about the size of a football field without the end zones (a standard American football field is 48,000 ft² including end zones, so an acre is slightly smaller).
What is the difference between an acre and a hectare?
An acre is a U.S. customary unit equal to 43,560 ft² (about 4,047 m²). A hectare is a metric unit equal to 10,000 m² (about 107,639 ft²). One hectare is about 2.471 acres. They are not interchangeable.
Can I convert linear feet to acres?
No. Linear feet measure length, while acres measure area. You need two dimensions (length and width) to compute area. If you have a rectangle, multiply length × width in feet to get square feet, then divide by 43,560.
How many acres is 100 feet by 100 feet?
100 ft × 100 ft = 10,000 ft². Dividing by 43,560 gives 0.2296 acres, or about 0.23 acres. That is a common size for a small residential lot.
Related
Formula used
in sqft | Square feet | ft² | 87120 | 0 out acres | Acres | acres | sqft / 43560 | 4 out sqyd | Square yards | yd² | sqft / 9 | 2 out sqm | Square meters | m² | sqft * 0.09290304 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.