ThisCalculator

Everyday

Best The Finals Graphics Settings for Higher FPS

Updated · Standard formula, shown below

For the best balance of high FPS and low input lag in The Finals, the top pick is a custom preset: everything on Low/Off except Resolution Scale at 100% and Anti-Aliasing on TAAU, with NVIDIA Reflex enabled (if you have an NVIDIA GPU) and DLSS set to Quality (if you have a supported card). This combination maximizes frame rate, minimizes rendering latency, and keeps the image sharp enough to spot enemies at range.

What to Look For

When tuning The Finals for competitive play, you need to prioritize settings that reduce GPU and CPU load, lower frame time spikes, and cut rendering latency. Here are the criteria that actually matter:

  • Frame Rate (FPS): Higher FPS means smoother motion and more responsive aiming. Aim for at least 144 FPS on a 144Hz monitor, or 240+ on a 240Hz display.
  • Input Lag: The delay between your mouse click and the shot registering. This comes from both the game engine and the render pipeline. NVIDIA Reflex (or AMD Anti-Lag) directly reduces this.
  • Frame Pacing: Consistent frame times (e.g., 6.9ms for 144Hz) are more important than raw peak FPS. Stutters feel worse than a slightly lower but stable frame rate.
  • Visual Clarity: You need to see enemies clearly. Settings like Resolution Scale, Anti-Aliasing, and Texture Quality affect how easy it is to spot movement at distance.
  • GPU/CPU Load Balance: A setting that is GPU-heavy might not matter if you’re CPU-bound. Check your bottleneck—if your GPU is at 99% usage, lower GPU settings; if CPU is at 99%, lower CPU-heavy settings like ragdoll physics or vegetation.

Option 1: Full Low Preset (with TAAU)

Strengths: Maximum FPS. Every setting on Low or Off reduces GPU and CPU load, giving the highest possible frame rate on any system. This is the go‑to for high‑refresh monitors and low‑end GPUs.

Trade-offs: The game looks flat, shadows are harsh, and distant objects may pop in. Anti-aliasing is needed to avoid jagged edges, so keep TAAU on (it’s cheap and effective).

Who it suits: Players with GTX 1060‑class GPUs or those on 240Hz monitors who need every last frame. Also good for laptops where thermals limit performance.

Option 2: Low + DLSS Quality (NVIDIA)

Strengths: DLSS (Deep Learning Super Sampling) renders at a lower internal resolution (e.g., 66% of 1080p) and upscales to your native res. This gives a significant FPS boost while looking nearly as sharp as native. On RTX cards, this is often the best balance of FPS and image quality.

Trade-offs: Requires an RTX 20/30/40 series GPU. Some players notice slight ghosting or softness in fast motion, though Quality mode minimizes this.

Who it suits: RTX owners who want to keep visual fidelity (like texture detail) while still hitting high frame rates. Ideal for 1440p or 4K monitors.

Option 3: Low + FSR Quality (AMD/Any GPU)

Strengths: FSR (FidelityFX Super Resolution) works on any GPU, including NVIDIA and Intel. It provides a similar FPS boost to DLSS without needing dedicated hardware. Quality mode looks decent and the performance gain is substantial.

Trade-offs: Image quality is slightly worse than DLSS, especially at lower resolutions (1080p). Some players report shimmering on thin objects like railings.

Who it suits: Players with non‑RTX GPUs (GTX 10/16 series, RX 5000/6000/7000 series) who want a FPS boost without dropping resolution scale manually.

Option 4: Custom Competitive (Low + High Textures)

Strengths: Keep most settings on Low, but raise Texture Quality to High (or Epic if you have VRAM). Textures don’t affect FPS much unless you run out of VRAM, and they make enemies easier to identify (clothing, weapon skins). Also raise View Distance to High to spot snipers earlier.

Trade-offs: Slightly higher VRAM usage, which can cause stutters if your GPU has less than 6GB. Also, high view distance may reduce FPS on weaker CPUs.

Who it suits: Players with 8GB+ VRAM GPUs who want a competitive edge without making the game look like a potato.

Option 5: NVIDIA Reflex On (with any settings)

Strengths: Reflex reduces input lag by syncing the CPU and GPU more closely. It’s a free performance win for RTX users. In The Finals, enabling Reflex (On or Boost) can cut latency by 10–20%, making aiming feel more direct.

Trade-offs: Only works on NVIDIA GTX 900/1000/RTX series (Reflex requires GTX 900+). On older GPUs, Boost mode may slightly reduce FPS.

Who it suits: Any NVIDIA user, especially those on 144Hz+ monitors. It’s a no‑brainer to enable.

Option 6: AMD Anti-Lag (for AMD GPUs)

Strengths: AMD’s equivalent to Reflex, reducing input lag on Radeon cards. It’s built into the driver and works with most games, including The Finals.

Trade-offs: Not as effective as Reflex in some titles, and can cause issues with certain overlays. Make sure to enable it in the AMD Adrenalin software, not in‑game.

Who it suits: AMD GPU owners who want lower latency without changing in‑game settings.

How to Choose

Budget: If you have a low‑end GPU (GTX 1650, RX 570), use Full Low + TAAU. If you have an RTX 3060 or better, use Low + DLSS Quality. For AMD, use Low + FSR Quality.

Use Case: If you’re playing casually and want the game to look good, raise Textures and Shadows to Medium, but keep Anti‑Aliasing on TAAU and Reflex on. If you’re in ranked or tournaments, prioritize FPS and latency—set everything to Low, enable Reflex, and keep DLSS/FSR on Quality.

Common Trade-offs: The biggest trade‑off is between visual clarity and FPS. Lowering Resolution Scale to 75% gives a big FPS boost but makes distant enemies blurry. Using DLSS/FSR Quality gives a similar boost with less blur. Also, turning off Dynamic Resolution and V‑Sync is essential—V‑Sync adds input lag, and Dynamic Resolution can cause sudden FPS drops.

Frequently Asked Questions

Q: Does DLSS increase input lag?
A: No, DLSS itself doesn’t increase input lag. The lower render resolution actually reduces GPU load, which can lower latency. Combined with Reflex, it’s a net win.

Q: Should I turn on V‑Sync?
A: No. V‑Sync caps your frame rate to your monitor’s refresh rate and adds significant input lag. Use Reflex or Anti‑Lag instead, and cap your FPS slightly below your refresh rate (e.g., 141 FPS on a 144Hz monitor) using the in‑game FPS limiter.

Q: What’s the best FPS cap for competitive play?
A: Cap it to your monitor’s refresh rate minus 3 (e.g., 141 for 144Hz, 237 for 240Hz). This prevents screen tearing without adding latency.

Q: Does texture quality affect FPS?
A: Only if you run out of VRAM. If you have 6GB+ VRAM, High textures have minimal impact on FPS. If you have 4GB, stick to Medium.

Q: Should I use TAAU or DLSS?
A: If you have an RTX card, DLSS Quality is better than TAAU (it’s more efficient). If you don’t, TAAU is the best anti‑aliasing option for performance.

Q: Why do I get stutters even on Low?
A: Stutters are often caused by shader compilation or CPU bottlenecks. Make sure your drivers are updated, and consider lowering View Distance or Ragdoll Physics if your CPU is older.

Bottom Line

For the best combination of high FPS and low input lag, start with the Low preset, set Resolution Scale to 100%, Anti‑Aliasing to TAAU, and enable NVIDIA Reflex (or AMD Anti‑Lag). If you have an RTX GPU, switch to DLSS Quality; otherwise use FSR Quality. This setup will give you a competitive edge without sacrificing too much visual clarity. Adjust Textures and View Distance up if you have spare VRAM and CPU headroom. Test in the practice range and monitor your FPS with the in‑game overlay—if you’re hitting your monitor’s refresh rate consistently, you’re good to go.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.