Armored Core 6 Crashing: Fixes That Work
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
If Armored Core 6: Fires of Rubicon is crashing on your PC, the most common causes are outdated graphics drivers, corrupted shader cache, or a conflict with overlay software. This guide walks you through the proven fixes, from quick checks to deeper system tweaks, so you can get back to piloting your AC.
Why Does Armored Core 6 Crash?
Armored Core 6: Fires of Rubicon is a demanding game that uses the same engine as Elden Ring and Sekiro. Crashes can happen for several reasons, but the most frequent culprits are:
- Outdated or corrupted GPU drivers – especially on NVIDIA cards, where a new driver often fixes stability issues.
- Shader cache problems – the game compiles shaders on the fly, and a corrupted cache can cause crashes at specific moments.
- Overlay software conflicts – Discord, GeForce Experience, MSI Afterburner, or RGB utilities can interfere with the game’s rendering.
- Overheating or unstable overclocks – the game pushes hardware hard, and an unstable CPU or GPU overclock can trigger crashes.
- Insufficient RAM or VRAM – if your system is low on memory, the game may crash when loading new areas.
Quick Fixes to Try First
Before diving into complex troubleshooting, try these simple steps that resolve a large percentage of crashes:
- Restart your PC – a fresh boot clears temporary glitches and frees memory.
- Verify game files – in Steam, right-click the game, select Properties, then Local Files, and click “Verify integrity of game files.” This replaces any corrupted or missing files.
- Update your GPU driver – visit the NVIDIA or AMD website, download the latest driver for your card, and do a clean install (check the box for “Clean installation” on NVIDIA).
- Disable overlays – turn off Discord overlay, GeForce Experience overlay, and any other in-game overlays you have running.
- Run the game as administrator – right-click the game executable (or Steam shortcut) and select “Run as administrator.”
Fix Shader Cache and Graphics Settings
If the quick fixes don’t help, the problem may be with how the game handles shaders. Armored Core 6 compiles shaders during gameplay, and a corrupted cache can cause crashes at specific points (like when a boss uses a heavy effect).
- Clear the DirectX shader cache – open Disk Cleanup, select your C: drive, and check “DirectX Shader Cache.” Run it to clear the cache.
- Lower graphics settings – reduce settings like Ray Tracing (if you have an RTX card), Shadows, and Effects. The game is optimized for consoles, and high-end settings on PC can stress VRAM.
- Disable Ray Tracing – Ray Tracing is a known source of crashes on some systems. Turn it off in the graphics menu.
- Cap the frame rate – use the in-game limiter or a tool like RivaTuner to cap at 60 FPS. Uncapped frame rates can cause instability, especially on high-refresh monitors.
Check System Stability and Overheating
Armored Core 6 is a demanding game that can push your hardware to its limits. If your system is overheating or has an unstable overclock, you’ll see crashes under load.
- Monitor temperatures – use a tool like MSI Afterburner or HWMonitor to check CPU and GPU temps while playing. If your GPU exceeds 85°C or CPU exceeds 90°C, you may have a cooling issue.
- Remove overclocks – if you have an overclock on your CPU, GPU, or RAM, reset to stock speeds. Even a stable overclock in other games can crash in this one.
- Update your BIOS – motherboard manufacturers often release BIOS updates that improve stability with newer games. Check your motherboard’s support page.
- Ensure sufficient power – a failing or underpowered PSU can cause crashes under load. Make sure your PSU meets the game’s requirements and is in good condition.
When Crashes Persist: Advanced Troubleshooting
If you’ve tried everything above and still crash, there are a few more advanced steps to consider:
- Disable fullscreen optimizations – right-click the game’s .exe file, go to Properties, then Compatibility, and check “Disable fullscreen optimizations.”
- Run in windowed mode – some players report that borderless windowed mode is more stable than fullscreen. Change this in the game’s display settings.
- Reinstall the game – a fresh install can fix issues that file verification misses.
- Check for Windows updates – ensure your OS is up to date, as missing updates can cause compatibility issues.
- Disable third-party antivirus – temporarily disable your antivirus (except Windows Defender) to see if it’s interfering. If the game runs, add an exception for the game folder.
Common Misconceptions About Crashes
There are a few myths about Armored Core 6 crashes that you should ignore:
- “It’s a console port, so it’s broken” – while the PC version has had some issues, most crashes are fixable with the steps above, and the game is generally stable on modern hardware.
- “More RAM always fixes crashes” – if you have 16GB or more, adding more RAM rarely helps. Crashes are more often driver or software related.
- “You need to reinstall Windows” – a full OS reinstall is rarely necessary. Try the targeted fixes first.
Frequently Asked Questions
Why does Armored Core 6 crash on startup?
Startup crashes are usually caused by outdated drivers or missing Visual C++ redistributables. Update your GPU driver and install the latest Visual C++ packages from Microsoft. Also verify game files, as a corrupted file can prevent the game from launching.
Will lowering graphics settings reduce crashes?
Yes, lowering settings can help, especially if you have a GPU with limited VRAM (like 4GB or 6GB). Reduce textures, shadows, and effects. Disabling Ray Tracing is particularly effective if you have an RTX card.
Can overlay software cause crashes?
Yes, overlays like Discord, GeForce Experience, and MSI Afterburner can interfere with the game’s rendering. Disable them and see if crashes stop. You can also try running the game in fullscreen mode without any overlays.
Is there a known fix for crashes during boss fights?
Boss fights are often where shader compilation hits hard. Clearing the DirectX shader cache and lowering effects quality can help. Also, ensure your GPU drivers are up to date, as new drivers often optimize for specific scenes.
Does the game crash on both PC and console?
Console versions are generally stable, though occasional crashes can occur. The PC version is more prone to crashes due to varying hardware configurations. The fixes in this article are for PC players.
Should I wait for a patch instead of troubleshooting?
If you’re not in a hurry, waiting for a patch is reasonable, as developers regularly release stability fixes. However, the steps above will likely solve the issue now, so it’s worth trying them before waiting.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.