Best Streamlabs Desktop Settings for Streaming
The top pick for most streamers is the Streamlabs Desktop recommended encoder settings for NVENC (NVIDIA): x264 at 6000 kbps for 1080p60 if you have a strong CPU, or NVENC at 6000 kbps for 1080p60 if you have a modern NVIDIA GPU. This balance gives the best quality-to-performance ratio for the majority of setups, and Streamlabs Desktop’s auto-configuration tool will often suggest these exact values. Below is a practical guide to choosing the right settings for your specific hardware and internet speed.
What to Look For
When configuring Streamlabs Desktop, focus on these five factors that directly affect stream quality and performance:
- Encoder – The software (x264) or hardware (NVENC, AMD AMF, Intel QSV) that compresses your video. Hardware encoders offload work from your CPU, while x264 uses CPU cores and can look better at lower bitrates if you have a powerful processor.
- Bitrate – The amount of data sent per second (kbps). Higher bitrate improves quality but requires upload bandwidth. Twitch recommends 6000 kbps for 1080p60; YouTube can handle higher.
- Resolution and FPS – Output resolution and frame rate. 1080p60 is the standard for non-partnered streamers, but 720p60 or 900p60 may be better if your hardware or internet can’t handle 1080p.
- Keyframe Interval – Usually set to 2 seconds for streaming. This tells the encoder to send a full frame every 2 seconds, which helps viewers connect faster and reduces buffering.
- Preset / Quality – For NVENC, use the “Quality” preset; for x264, choose a preset like “faster” or “medium” that balances CPU load and quality.
Option 1: NVENC (NVIDIA GPU) – Best for Most Gamers
Strengths: Uses the dedicated encoder on NVIDIA GTX 10-series and newer GPUs (including RTX cards). It produces excellent quality at 6000 kbps with virtually no impact on your CPU, leaving more headroom for games and other apps. Streamlabs Desktop’s auto-optimizer will typically set NVENC with the “Quality” preset and a keyframe interval of 2.
Trade-offs: Requires a relatively recent NVIDIA GPU. Older GTX 10-series cards work, but quality is slightly lower than x264 at the same bitrate. Also, if you have a very weak CPU, NVENC is still the better choice because it frees up CPU cycles.
Who it suits: Anyone with an NVIDIA GTX 1060 or better, especially if you play CPU-intensive games or stream from a single PC.
Option 2: x264 (CPU) – Best for High-End CPUs
Strengths: Software encoding gives you more control over quality. With a powerful multi-core CPU (like a Ryzen 7 or Intel i7 with 8+ cores), x264 at the “faster” or “medium” preset can look slightly better than NVENC at the same bitrate, especially for low-motion content like desktop streams or art.
Trade-offs: Consumes significant CPU resources. If your CPU is older or you’re playing a demanding game, you’ll see frame drops or stuttering. You may need to drop to 720p60 to keep the stream smooth.
Who it suits: Streamers with a high-end CPU (Ryzen 7/9, Intel i7/i9) who don’t want to rely on GPU encoding, or those using a dedicated streaming PC.
Option 3: AMD AMF (AMD GPU) – Best for AMD Users
Strengths: AMD’s hardware encoder is built into Radeon GPUs (RX 5000 series and newer). It offloads encoding from the CPU, similar to NVENC. Modern AMF encoders are much improved and can deliver good quality at 6000 kbps.
Trade-offs: Historically, AMF quality lagged behind NVENC, especially at lower bitrates. You may need to use a higher bitrate (e.g., 8000 kbps) to get comparable quality. Also, some users report occasional driver issues with AMF.
Who it suits: AMD GPU owners who want hardware encoding without buying an NVIDIA card. It’s a solid choice for 720p60 or 1080p60 at moderate bitrates.
Option 4: Intel QSV (Intel iGPU) – Best for Intel Users with iGPU
Strengths: Intel’s Quick Sync Video is available on most Intel CPUs with integrated graphics. It’s a hardware encoder that uses a dedicated part of the CPU, so it has minimal impact on game performance. It’s free and works well for 720p60 or 1080p60 at 6000 kbps.
Trade-offs: Quality is generally a step below NVENC and x264 at the same bitrate. You may need to increase bitrate to compensate. Also, not all Intel CPUs have QSV enabled (some low-end models lack it).
Who it suits: Intel CPU users who don’t have a discrete GPU or who want to save CPU resources for gaming. It’s a good budget option.
Option 5: Streamlabs Auto-Optimizer – Best for Beginners
Strengths: Streamlabs Desktop includes an auto-optimizer that tests your hardware and internet speed, then recommends settings automatically. It’s a great starting point because it takes the guesswork out of the process.
Trade-offs: The auto-optimizer may not always pick the best settings for your specific game or preferences. It might choose a lower resolution to be safe, or it might not account for other programs using your bandwidth.
Who it suits: New streamers who want a quick setup without diving into technical details. You can always tweak the settings later.
How to Choose
Start with your internet upload speed. If you have less than 5 Mbps upload, you’ll need to stream at 720p30 with a bitrate of 2500-3500 kbps. If you have 6 Mbps or more, you can aim for 1080p60 at 6000 kbps (Twitch’s recommended max).
Next, consider your hardware. If you have a modern NVIDIA GPU, use NVENC. If you have a high-end CPU and no NVIDIA GPU, use x264. If you have an AMD GPU, try AMF. For Intel iGPU, QSV is a viable fallback.
Finally, think about your game. Fast-paced games like FPS benefit from higher frame rates (60fps) and higher bitrates. Slower games like strategy or art streams can look fine at 720p30 with lower bitrate.
Common trade-offs: higher resolution and FPS require more bitrate and hardware power. If you notice dropped frames in Streamlabs, lower the bitrate or resolution. If your CPU usage is near 100%, switch to a hardware encoder or lower the x264 preset.
Frequently Asked Questions
What bitrate should I use for 1080p60 streaming?
For 1080p60, use 6000 kbps on Twitch (the maximum recommended). For YouTube, you can go up to 12000 kbps if your upload speed allows. If you have less bandwidth, drop to 720p60 at 4500 kbps.
Should I use NVENC or x264?
If you have an NVIDIA GPU (GTX 1060 or newer), use NVENC. It gives you great quality without taxing your CPU. If you have a very powerful CPU (8+ cores) and no NVIDIA GPU, x264 at the “faster” preset is fine, but be prepared for CPU usage.
What is the keyframe interval and what should I set it to?
The keyframe interval tells the encoder how often to send a full frame. For streaming, set it to 2 seconds. This helps viewers join your stream faster and reduces buffering when they skip around.
Why do I get dropped frames even with good settings?
Dropped frames are usually caused by network issues (insufficient upload speed, Wi-Fi instability) or encoder overload. Try lowering your bitrate, using a wired Ethernet connection, or switching to a hardware encoder.
Can I stream at 1440p or 4K?
You can, but it requires very high bitrates (15,000+ kbps) and a strong encoder. Most platforms don’t support it well for non-partners. Stick to 1080p60 unless you have a dedicated streaming PC and high upload speed.
Should I use the “Ultra Low Latency” mode?
Streamlabs offers low-latency modes that reduce delay, but they can increase CPU usage and may cause issues with some encoders. Use it only if you need real-time interaction with your chat and your hardware can handle it.
Bottom Line
For most streamers, the best Streamlabs Desktop settings are NVENC (if you have an NVIDIA GPU) or x264 (if you have a strong CPU) at 1080p60 with a bitrate of 6000 kbps, keyframe interval 2, and the “Quality” preset for NVENC or “faster” for x264. Use Streamlabs’ auto-optimizer as a starting point, then tweak based on your specific hardware and internet. If you experience dropped frames, lower the bitrate or resolution until it’s stable. Remember, consistency is more important than maximum quality—a stable 720p60 stream is better than a buffer-heavy 1080p60.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.