Sonos Arc Ultra: Do You Need Sub or Era Speakers?
The calculator for this page is switched off while it is checked. The formula is below, and the worked example in the article shows how to use it by hand.
No, you do not need a Sonos Sub or Era speakers to use the Arc Ultra, but adding them changes what the soundbar can do. The Arc Ultra alone delivers a full, room-filling sound experience with built-in bass and height channels; the Sub and Era speakers are optional upgrades that add deeper low-end and true surround effects, respectively.
What the Arc Ultra Provides on Its Own
The Sonos Arc Ultra is a premium soundbar designed to be a complete home theater solution by itself. It contains a total of 15 drivers, including a dedicated woofer and two upward-firing drivers for Dolby Atmos height effects. Sonos claims the Arc Ultra produces deeper bass than its predecessor, the original Arc, thanks to a new “Sound Motion” woofer that moves more air with less power. For many apartment dwellers or casual viewers, the soundbar alone is enough to feel a clear upgrade over TV speakers, with clear dialogue, wide stereo separation, and a convincing sense of space from virtualized surround processing.
What a Sub Adds: The Bass Difference
The Sonos Sub (Gen 3) is a wireless subwoofer that pairs with the Arc Ultra via the Sonos app. Its primary job is to reproduce the lowest frequencies—typically below 50 Hz—that the soundbar’s built-in woofers cannot fully handle. In action, the Sub adds physical impact to explosions, musical bass lines, and deep rumbles in movies. It also relieves the Arc Ultra’s own woofers, allowing the soundbar to focus on midrange and treble, which can make dialogue and effects sound cleaner at higher volumes. If you watch a lot of action films or listen to bass-heavy music, the Sub is the single most noticeable upgrade you can make. However, it is not necessary for general TV viewing or casual music listening.
What Era Speakers Add: True Surround Sound
Adding a pair of Sonos Era 100 or Era 300 speakers as rear surrounds transforms the Arc Ultra from a virtualized soundstage into a true multi-channel system. The Arc Ultra alone uses psychoacoustic tricks to simulate rear audio, which can be convincing but lacks the precision of physical speakers behind you. With Era 300s—which have multiple drivers including side-firing and upward-firing ones—you get dedicated rear channels and, with Dolby Atmos content, actual height effects from behind. This creates a 360-degree bubble of sound that makes you feel inside the scene. For movie enthusiasts who want the full Atmos experience, rear speakers are essential, but they are an add-on, not a requirement.
How to Choose What You Need
The decision hinges on your room, your content, and your budget. Consider these factors:
- Room size: In a small or medium room, the Arc Ultra alone may fill the space adequately. In a large open-plan area, you may need a Sub to maintain bass presence and rear speakers to cover the distance.
- Content type: If you mostly watch news, talk shows, or sitcoms, the soundbar alone is fine. If you watch blockbuster movies or stream Atmos music, a Sub and rears will make a dramatic difference.
- Listening habits: For late-night viewing, a Sub might bother neighbors; the soundbar’s built-in bass is more restrained. For loud, immersive listening, the Sub is almost mandatory to avoid distortion.
- Budget: The Arc Ultra is already a significant investment. Adding a Sub and two Era 300s roughly doubles the cost. Start with the soundbar and add components over time.
Common Misconceptions
One frequent misunderstanding is that the Arc Ultra cannot produce bass without a Sub. That is false—the soundbar has a built-in woofer and can play down to about 40 Hz, which is respectable for a soundbar. Another myth is that you must use Sonos-branded surrounds; the Arc Ultra supports any Sonos speaker as rears, including older Play:1 or One models, which can save money. However, for Atmos height effects, you need speakers with upward-firing drivers, like the Era 300. Also, some users think the Sub is required for the Arc Ultra’s Trueplay tuning; it is not—Trueplay works with the soundbar alone.
Cost and Value Considerations
The Arc Ultra retails around $999, the Sub Gen 3 around $799, and a pair of Era 300s around $449 each. That puts a full 5.1.4 setup at over $2,600. While that is expensive, the modular nature of Sonos means you can buy the soundbar first and add components later, often during sales or with refurbished units. Many users find that a Sub alone provides the best price-to-performance ratio for movies, while rear speakers are more of a luxury. If you are on a tight budget, consider using cheaper Sonos speakers like the IKEA Symfonisk bookshelf as rears—they work fine for surround effects, though they lack Atmos height drivers.
Setup and Compatibility
Setting up a Sub or Era speakers with the Arc Ultra is straightforward via the Sonos app. You place the Sub anywhere in the room, ideally near the TV, and the app runs a quick calibration. For rears, you position them behind your seating area, roughly at ear height, and the app will guide you. The system automatically routes audio to the appropriate channels once the components are added. One caveat: the Arc Ultra uses Wi-Fi for surround audio, not a physical connection, so a stable network is essential. Also, the Era 300s must be set to “Full” surround mode in the app to utilize their height drivers; otherwise, they act as standard rear speakers.
Frequently Asked Questions
Can I use the Arc Ultra without a Sub or Era speakers?
Yes, absolutely. The Arc Ultra is a complete soundbar that works perfectly on its own. It produces good bass and virtualized surround sound, so it is a huge upgrade over TV speakers. You can always add a Sub or rears later if you feel the need.
Will the Sub improve dialogue clarity?
Indirectly, yes. By handling the low frequencies, the Sub frees the soundbar’s drivers to focus on midrange and treble, which can make dialogue sound cleaner and more distinct, especially at higher volumes. However, the Arc Ultra already has a dialogue enhancement feature in the app, so you may not notice a huge difference in quiet scenes.
Are Era 300s worth it over cheaper Sonos speakers as rears?
If you want the full Dolby Atmos experience, yes. The Era 300s have upward-firing drivers that bounce sound off the ceiling, creating height effects from behind. Cheaper Sonos speakers like the One or Symfonisk only provide standard surround sound without height channels. For non-Atmos content, the difference is minor.
Can I mix different Sonos speakers as rears?
Technically, you can pair any two Sonos speakers as surrounds, but they must be the same model for the best experience. Mixing models can cause audio level imbalances and may not support all features, like Atmos height. Sonos recommends using identical speakers for surrounds.
Does the Sub work with other Sonos devices?
Yes, the Sub can be paired with any Sonos soundbar or speaker that supports it, such as the Beam or Ray, and it can also be used as a standalone speaker in a stereo pair with a Sonos Amp. However, it is most effective when paired with a soundbar like the Arc Ultra.
Related
Formula used
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.