ThisCalculator

Everyday

Best Modern Warfare 4 Graphics Settings for High FPS

Updated · Standard formula, shown below

For the best balance of high FPS and clear visibility in Modern Warfare 4, the top pick is a custom mix of Low and Medium settings: Textures on Medium, everything else on Low or Off, with FidelityFX CAS (or DLSS if supported) enabled. This combination maximizes frame rate while keeping enemy models and weapon details sharp enough to spot at range, without the clutter of high-end shadows and post-processing.

What to Look For

When tuning graphics for competitive play, prioritize settings that affect visibility and frame rate over visual polish. Key criteria include:

  • Frame Rate (FPS): Higher FPS reduces input lag and makes tracking targets smoother. Aim for at least 144 FPS on a 144Hz monitor, or 60 FPS on a standard display.
  • Visibility: Settings that reduce visual noise (like motion blur, depth of field, and excessive particle effects) help you spot enemies against cluttered backgrounds.
  • Render Resolution: Native resolution (e.g., 1920×1080) is ideal for clarity. Upscaling (DLSS/FSR) can boost FPS with minimal visual loss.
  • Texture Quality: Higher textures make surfaces clearer, but they consume VRAM. If you have enough VRAM, Medium or High is fine; otherwise, Low avoids stuttering.
  • Shadow and Lighting: Lower shadow quality reduces GPU load and can even improve visibility by making shadows less dark and less distracting.
  • Post-Processing: Effects like motion blur, film grain, and depth of field hurt clarity. Turn them off for a cleaner image.
  • Upscaling/Sharpening: Tools like DLSS, FSR, or FidelityFX CAS can boost FPS and sharpen edges, making enemies pop without a big performance hit.

Option 1: Competitive Low (Max FPS)

Settings: Render Resolution 100%, Upscaling Off, Textures Low, Shadows Off, Post-Processing Off, Anti-Aliasing Off, Motion Blur Off, Depth of Field Off, Film Grain Off, Ambient Occlusion Off.

Strengths: This gives the absolute highest FPS, especially on mid-range GPUs. It reduces visual clutter to a minimum, making enemies stand out against flat surfaces.

Trade-offs: The game looks flat and jagged edges are visible. Long-range target identification can be slightly harder without anti-aliasing, but most players adapt quickly.

Best for: Players with older GPUs or those chasing 240Hz+ refresh rates. Also ideal for highly competitive play where every frame matters.

Option 2: Balanced (Recommended Default)

Settings: Textures Medium, Shadows Low, Anti-Aliasing SMAA T2X, Post-Processing Off, Motion Blur Off, Depth of Field Off, Film Grain Off, Ambient Occlusion Off, FidelityFX CAS On (80%).

Strengths: This is the sweet spot. It maintains high FPS (often 144+ on a mid-range card) while keeping textures sharp enough to read weapon skins and enemy details. CAS sharpening makes edges crisp without the performance cost of heavy anti-aliasing.

Trade-offs: Not as fast as the all-Low preset, but the FPS difference is usually small (5-10%). Shadows on Low are still visible but not distracting.

Best for: Most players with GTX 1660 or RTX 2060-class GPUs or better. It’s the safest starting point.

Option 3: High FPS with DLSS/FSR

Settings: Render Resolution 100%, DLSS (Quality mode) or FSR (Quality mode), Textures High, Shadows Medium, Post-Processing Off, Motion Blur Off, Depth of Field Off, Film Grain Off, Ambient Occlusion Low.

Strengths: Upscaling gives a significant FPS boost (often 30-50%) while keeping image quality close to native. You can afford higher textures and shadows, improving visual clarity in dark areas.

Trade-offs: DLSS/FSR can introduce slight ghosting or shimmering on fast-moving objects. Requires a compatible GPU (Nvidia RTX for DLSS, most modern GPUs for FSR).

Best for: Players with RTX cards or AMD GPUs that support FSR, especially if you want high FPS without sacrificing visual fidelity.

Option 4: Visibility-Focused (No Upscaling)

Settings: Render Resolution 100%, Anti-Aliasing Off, Textures Medium, Shadows Off, Post-Processing Off, Motion Blur Off, Depth of Field Off, Film Grain Off, Ambient Occlusion Off, FidelityFX CAS On (100%).

Strengths: This removes all blur-inducing effects and uses aggressive sharpening to make enemy outlines extremely crisp. It’s a popular choice among professional players who want maximum clarity.

Trade-offs: Without anti-aliasing, distant objects can shimmer. The sharpening can make some textures look overly harsh, but most find it helps target acquisition.

Best for: Players who prioritize spotting enemies over visual polish, especially in long sightlines.

Option 5: Low Latency / Nvidia Reflex

Settings: Same as Balanced, but enable Nvidia Reflex (if available) and set it to Enabled + Boost. Also ensure G-Sync/FreeSync is off if you’re chasing maximum FPS (or on if you have a compatible monitor and are under 144 FPS).

Strengths: Reduces system latency, making aiming feel more responsive. This is not a graphics setting per se, but it complements high FPS for a competitive edge.

Trade-offs: Reflex has minimal visual impact, but it requires a compatible GPU and driver. It doesn’t increase FPS, just reduces delay.

Best for: Competitive players with Nvidia GPUs who want the lowest possible input lag.

How to Choose

Start with your hardware. If you have a GPU with 4GB VRAM or less, stick to Low textures and avoid upscaling that uses extra memory. For 6GB+ VRAM, Medium textures are safe. Then consider your monitor’s refresh rate: if you have a 144Hz display, aim for a stable 144 FPS; if 60Hz, you can afford higher settings.

Your use case matters: if you play casually, you might prefer higher visual quality with a slight FPS drop. If you play ranked or in tournaments, prioritize FPS and visibility over looks.

Common trade-offs: Shadows and post-processing are the biggest FPS killers; turning them off rarely hurts visibility. Textures use VRAM, not much GPU power, so keep them as high as your VRAM allows. Anti-aliasing is a trade-off between smoothness and sharpness; SMAA T2X is a good middle ground, but many pros turn it off entirely.

Frequently Asked Questions

Should I use DLSS or FSR?

Yes, if your GPU supports it. DLSS (Nvidia RTX) and FSR (AMD or any) can boost FPS significantly with minimal visual loss. Use Quality mode for the best balance.

Does turning off shadows improve FPS a lot?

Yes, shadows are one of the most demanding settings. Turning them from High to Off can increase FPS by 10-20% on many systems.

Is motion blur ever helpful?

No, motion blur blurs the screen during movement, making it harder to track enemies. Always turn it off for competitive play.

What is FidelityFX CAS?

It’s a sharpening filter that makes edges look crisper without a big performance hit. It’s great for improving visibility when anti-aliasing is off.

Should I cap my FPS?

If your monitor has a refresh rate (e.g., 144Hz), cap FPS slightly above that (e.g., 150) to avoid screen tearing and reduce GPU load. If you have a G-Sync/FreeSync monitor, cap to the refresh rate.

Why do I get stutters with High textures?

Stutters usually mean your VRAM is full. Lower texture quality until stutters disappear, or reduce render resolution.

Bottom Line

For most players, the Balanced preset (Option 2) is the best all-rounder: high FPS, clear visuals, and minimal clutter. If you have a lower-end GPU, start with Competitive Low and raise settings one by one until you find your comfort zone. If you have an RTX card, enable DLSS Quality to get both FPS and fidelity. Remember, the goal is consistent FPS and clear enemy visibility—not pretty screenshots.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.