ThisCalculator

Everyday

Barometric Pressure Conversion Table

Updated · Standard formula, shown below

The calculator for this page is switched off while it is checked. The formula is below, and the worked example in the article shows how to use it by hand.

This calculator converts barometric pressure readings between the most common units: inches of mercury (inHg), millibars (hPa), pounds per square inch (psi), and atmospheres (atm). You enter a single pressure value in any unit, and the calculator returns the equivalent values in all other units, using the standard conversion factors. The table below the calculator shows the same conversions for a range of typical sea-level and storm-pressure values.

Formula

The conversion relies on fixed physical relationships between pressure units. The base unit in this calculator is the hectopascal (hPa), which is numerically identical to the millibar (mbar). The conversion factors are:

  • 1 inHg = 33.8639 hPa
  • 1 psi = 68.9476 hPa
  • 1 atm = 1013.25 hPa

So if you input a value V in a unit with factor F (where F is the number of hPa per unit), the pressure in hPa is V × F. Then divide by the factor for each target unit to get the equivalent value.

Worked Example

Using the default input: 1013.25 hPa (standard sea-level pressure).

  1. Convert to inHg: 1013.25 / 33.8639 = 29.92 inHg
  2. Convert to psi: 1013.25 / 68.9476 = 14.70 psi
  3. Convert to atm: 1013.25 / 1013.25 = 1.0000 atm

The calculator outputs exactly those values, rounded to 2 decimals (or 4 for atm).

Why Barometric Pressure Units Differ

Barometric pressure is measured with different units depending on the field and region. Meteorologists in the US often use inches of mercury, while most of the world uses hectopascals (hPa) or millibars. Aviation uses inches of mercury for altimeter settings, and engineering often uses psi. Understanding the conversion is essential when reading weather maps, setting altimeters, or comparing pressure data from different sources.

How to Read the Conversion Table

A typical conversion table lists pressure values in one column and the equivalent in other units in adjacent columns. For example, a common row might be:

  • 29.92 inHg = 1013.25 hPa = 14.70 psi = 1.000 atm
  • 30.00 inHg = 1015.92 hPa = 14.73 psi = 1.003 atm
  • 28.00 inHg = 948.19 hPa = 13.75 psi = 0.936 atm

To use the table, find your known pressure in the column of its unit, then read across to get the other units. If your value falls between rows, interpolate linearly or use the calculator for an exact result.

Common Mistakes and Misconceptions

One frequent error is confusing millibars (mbar) with hectopascals (hPa). They are exactly equal, so no conversion is needed. Another mistake is using the wrong conversion factor for inches of mercury: 1 inHg is 33.8639 hPa, not 33.86 or 34. Also, be careful with rounding: converting 29.92 inHg to hPa gives 1013.25, but if you round intermediate steps, you might get 1013.3. For precision, keep extra digits until the final step.

A common misconception is that standard sea-level pressure is always 29.92 inHg or 1013.25 hPa. That is the standard value, but actual pressure varies with weather and altitude. The conversion table works for any pressure value, not just standard.

When to Use Which Unit

  • inHg – US weather reports, aviation altimeter settings, and some barometers.
  • hPa/mbar – International meteorology, most weather maps, and scientific work.
  • psi – Engineering, tire pressure, and industrial applications.
  • atm – Chemistry, physics, and scuba diving (often for reference).

If you are reading a weather map from Europe, it will likely show hPa. If you are flying, the altimeter setting is given in inHg in the US and in hPa in most other countries. For tire pressure, you will see psi in the US and bar or kPa elsewhere.

Limitations of the Conversion

The conversion is purely mathematical and assumes a constant relationship between units. It does not account for temperature or altitude effects on pressure. For example, at high altitude, the actual barometric pressure is lower, but the conversion between units remains the same. The calculator is not a barometer; it only converts a given pressure value. If you need to know the current pressure, you must obtain that from a weather station or barometer.

Frequently Asked Questions

What is the difference between millibars and hectopascals?

There is no difference. The millibar (mbar) and the hectopascal (hPa) are exactly equal: 1 mbar = 1 hPa. The name was changed in the 1980s to align with the SI unit system, but both are still used interchangeably.

How do I convert inHg to mmHg?

To convert inches of mercury to millimeters of mercury, multiply by 25.4 (since 1 inch = 25.4 mm). For example, 29.92 inHg × 25.4 = 760 mmHg, which is standard atmospheric pressure. This conversion is common in medical and vacuum applications.

Why do weather maps use hPa instead of inHg?

Most of the world uses the metric system, and the hectopascal is the standard unit for atmospheric pressure in meteorology. It is a direct SI unit, and the numbers are convenient (e.g., 1013 hPa at sea level). The US is one of the few countries that still uses inches of mercury in public weather reports.

Is 1013.25 hPa exactly 1 atm?

Yes, by definition, 1 standard atmosphere (atm) is exactly 1013.25 hPa. This is a fixed value used in physics and chemistry. In practice, sea-level pressure is often close to this but varies by a few percent.

How do I convert kPa to psi?

To convert kilopascals (kPa) to psi, divide by 6.89476. For example, 100 kPa ÷ 6.89476 = 14.50 psi. Conversely, multiply psi by 6.89476 to get kPa. This is useful for tire pressure and industrial gauges.

What is the pressure at high altitude?

Atmospheric pressure decreases with altitude. At 5,000 meters (about 16,400 feet), pressure is roughly 540 hPa (about 16 inHg). At the summit of Mount Everest (8,848 m), it is about 337 hPa (about 9.95 inHg). The conversion table still applies; you just use the lower values.

Related

Formula used
in val | Pressure value | - | 1013.25 | 0
sel unit | Input unit | hPa=1, inHg=33.8639, psi=68.9476, atm=101.325
out hPa | Millibars (hPa) | hPa | val * unit | 2
out inHg | Inches of mercury | inHg | val * unit / 33.8639 | 2
out psi | Pounds per square inch | psi | val * unit / 68.9476 | 2
out atm | Atmospheres | atm | val * unit / 101.325 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.