ThisCalculator

Everyday

Add Remove Printers Mac: Full Guide

Updated · Standard formula, shown below

To add or remove a printer on a Mac, you use the Printers & Scanners settings in System Settings (macOS Ventura and later) or System Preferences (macOS Monterey and earlier). This guide covers the exact steps for both, how to troubleshoot common issues, and how to manage printer drivers and defaults.

Where Printer Settings Live on macOS

Apple has moved printer management into the same place as other device settings. On macOS Ventura, Sonoma, and Sequoia, open the Apple menu and choose System Settings, then click Printers & Scanners in the sidebar. On macOS Monterey and earlier, open System Preferences and click Printers & Scanners. Both show a list of installed printers on the left, with options to add, remove, set as default, and adjust print options on the right.

The list shows each printer’s name, type (USB, network, AirPrint), and status. A green dot means the printer is ready; a red dot or an error message means macOS cannot reach it. You can also see the driver in use by clicking a printer and looking at the “Driver” drop-down menu.

How to Add a Printer on a Mac

Adding a printer is usually automatic if the printer supports AirPrint or Bonjour. macOS scans the local network and lists nearby printers. For a USB printer, plug it in and it should appear within seconds. For a network printer, follow these steps:

  1. Open System Settings (or System Preferences) and go to Printers & Scanners.
  2. Click the + (plus) button below the printer list.
  3. Wait for the list to populate. It shows nearby printers, plus a separate “IP” tab for manual entry.
  4. Select your printer. If you see it, click Add. macOS will download the driver automatically if needed.
  5. If the printer does not appear, click the IP tab, enter the printer’s IP address, choose the protocol (usually AirPrint or IPP), and give it a name.

For a printer connected to a Windows PC on the same network, you may need to use the “Windows printer via spooler” option in the IP tab, but that is less common now that most printers support AirPrint.

How to Remove a Printer on a Mac

Removing a printer is a one-click operation, but be careful: it does not delete the driver, just the connection entry. To remove:

  1. Open Printers & Scanners in System Settings or System Preferences.
  2. Select the printer you want to remove from the list.
  3. Click the – (minus) button below the list.
  4. Confirm if prompted. The printer disappears from the list.

If you remove a printer that is currently the default, macOS will not automatically choose a new default. You will need to select another printer and click “Default printer” to set it. Also, removing a printer does not cancel any queued print jobs; those jobs are deleted with the printer entry.

What to Do When a Printer Won’t Add or Remove

Sometimes the plus button is greyed out, or the printer appears but fails to add. Common causes and fixes:

  • Printer not discovered: Make sure the printer is on the same Wi-Fi network as your Mac. For USB, try a different cable or port.
  • Driver missing: macOS usually downloads the driver automatically, but if you see “Generic PostScript Printer” or “Generic PCL Printer,” the driver may be incomplete. Go to the printer manufacturer’s website and download the latest driver for your macOS version.
  • Firewall blocking: In System Settings > Network > Firewall, make sure that incoming connections for printing are allowed. You can temporarily disable the firewall to test.
  • Removal fails: If the minus button does nothing, quit System Settings, then reopen it. If that does not work, restart your Mac and try again.
  • Printer stuck in list: Sometimes a printer appears multiple times. Remove all entries, then re-add the one that works.

If you are trying to remove a printer that is not responding, you can also delete its preference file. Open Finder, press Cmd+Shift+G, type ~/Library/Preferences/, and delete files that start with com.apple.print.. Then restart your Mac. This resets the printing system, but it will also remove all printers, so you will need to re-add them.

Printer Drivers: What You Need to Know

macOS includes built-in drivers for many printers, especially those that support AirPrint. AirPrint is Apple’s protocol that allows iOS and macOS devices to print without installing a separate driver. For older printers or those with advanced features (like duplex printing or tray selection), you may need a manufacturer driver.

To check which driver a printer is using, select it in the Printers & Scanners list and look at the “Driver” drop-down. If it says “Secure AirPrint” or “Generic PostScript,” the printer may still work for basic printing, but some features might be missing. In that case, download the latest driver from the manufacturer’s website and install it, then re-add the printer.

Driver updates are handled through Software Update on macOS. If a new driver is available, you will see it in System Settings > General > Software Update. Keeping drivers up to date fixes many printing issues.

Default Printer and Print Queue Management

You can set a default printer so that every print job goes to that printer automatically. In Printers & Scanners, right-click (or Control-click) a printer and choose “Set as default printer.” You can also choose “Last Printer Used” in the default printer drop-down, which makes macOS remember the printer you used last time.

To manage print jobs, open the printer’s queue by double-clicking the printer in the list. Here you can pause, resume, or cancel jobs. If a job is stuck, you can delete it from the queue, but if the printer is offline, you may need to reset the printing system (as described above) to clear all jobs.

How to Choose the Right Printer Connection

When adding a printer, you have several connection options. The best choice depends on your setup:

  • AirPrint: Best for most users. Works over Wi-Fi, no driver needed, supports most features.
  • IPP (Internet Printing Protocol): Good for network printers that do not support AirPrint. Enter the IP address and choose IPP.
  • Line Printer Daemon (LPD): Older protocol, still supported. Use if IPP fails.
  • USB: Direct connection. Reliable, but you can only print from one computer at a time.
  • Windows printer via spooler: For printers shared from a Windows PC. Requires the PC to be on and sharing enabled.

For most home users, AirPrint is the easiest. For office networks with many printers, IPP is more reliable. If you have a USB-only printer and want to print from multiple devices, consider connecting it to a Mac that is always on and sharing it via System Settings > General > Sharing > Printer Sharing.

Frequently Asked Questions

Why won’t my Mac find my printer?

Ensure the printer is powered on and connected to the same Wi-Fi network as your Mac. For USB, try a different port. Also check that the printer is not in sleep mode; press its power button to wake it. If it still does not appear, restart both the printer and your Mac, then try again.

How do I remove a printer that is not responding?

If the printer is offline, you can still remove it from the list using the minus button. If that does not work, reset the printing system by deleting the preference files as described above. This will remove all printers, so you will need to re-add them.

What is the difference between AirPrint and a regular driver?

AirPrint is Apple’s built-in driver that works with most modern printers. It requires no installation and supports basic printing, scanning, and faxing (if the printer has those features). A regular driver from the manufacturer may offer more advanced options like paper type, color management, and maintenance tools.

Can I add a printer using its IP address?

Yes. In the Add Printer window, click the IP tab, enter the printer’s IP address, and select a protocol (usually AirPrint or IPP). You can find the IP address from the printer’s control panel or by printing a network configuration page.

Will removing a printer delete its drivers?

No. Removing a printer only removes the connection entry. The driver remains on your Mac and will be used again if you re-add the printer. To fully remove a driver, you would need to delete it from the Library/Printers folder, which is not recommended unless you are troubleshooting.

Why does my printer show as “Paused”?

A printer can be paused if you manually paused it or if a print job failed. Open the printer’s queue and click the Resume button. If it keeps pausing, check for paper jams or low ink, and try deleting all jobs in the queue.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.