Seagate External HD Not Mounting on Mac? Fix It
If your Seagate external hard drive isn’t showing up on your Mac, the fix is usually a combination of checking the cable, reformatting the drive, or repairing the disk with Disk Utility. This article walks you through the most common causes and step-by-step solutions, from simple connection checks to more advanced Terminal commands.
Why Your Mac Won’t Mount the Drive
When you plug in a Seagate drive, macOS should automatically mount it—meaning it appears on the Desktop and in Finder under Locations. If it doesn’t, one of these is usually the culprit:
- Physical connection: A faulty cable, a dead USB port, or a hub that doesn’t supply enough power.
- File system format: The drive is formatted as NTFS (Windows default). macOS can read NTFS but cannot write to it, and sometimes won’t mount it at all.
- Drive corruption: The partition table or directory structure is damaged, so macOS can’t recognize it.
- Software conflicts: A background utility or a kernel extension (kext) is interfering with disk mounting.
First Steps: Check the Obvious
- Try a different cable and port. Use the cable that came with the drive if you have it. If you’re using a hub, plug directly into the Mac. For desktop drives with an external power supply, make sure the power adapter is plugged in and the LED is lit.
- Check if the drive appears in Disk Utility. Open Applications → Utilities → Disk Utility. If you see the drive in the left sidebar (even if it’s grayed out), macOS knows it’s connected—the problem is mounting, not connection.
- Restart your Mac. This clears temporary glitches. Then plug the drive in again.
Use Disk Utility to Mount or Repair
If the drive shows in Disk Utility but isn’t on the Desktop:
- Select the drive in the sidebar (the top-level item, not the volume below it).
- Click Mount in the toolbar. If that button is grayed out, the drive might be unmountable due to corruption.
- If mounting fails, click First Aid (or the Repair tab in older macOS versions). This scans and repairs the file system. It can take a while for large drives.
- After First Aid finishes, try mounting again. If it still fails, you may need to erase and reformat the drive (see below).
Reformatting the Drive (Erases Data)
If the drive is new or you have a backup, reformatting is the most reliable fix. Here’s how:
- Open Disk Utility.
- Select the drive and click Erase.
- Choose a format:
- APFS – Best for Mac-only use. Works on macOS 10.13 or later.
- Mac OS Extended (Journaled) – Better for older Macs or if you need compatibility with Time Machine on older systems.
- exFAT – If you need to use the drive with both Mac and Windows without extra software.
- Click Erase. This will delete all data on the drive.
If the drive doesn’t appear in Disk Utility at all, try a different cable or port. If it still doesn’t show, the drive may have a hardware failure.
NTFS Drives: Read-Only or Invisible
Seagate drives are often pre-formatted as NTFS for Windows. macOS can read NTFS but not write to it, and in some cases it won’t mount the drive at all. You have two options:
- Reformat to exFAT or APFS (as above) if you don’t need the Windows format.
- Install a third-party NTFS driver like Paragon NTFS or Seagate’s own Paragon driver (which Seagate offers free for their drives). These let macOS write to NTFS.
When Nothing Works: Terminal Commands
If Disk Utility can’t repair the drive, you can try forcing the mount from Terminal. This is more advanced, but often works when the GUI fails.
- Open Terminal (in Applications → Utilities).
- Type
diskutil listand press Enter. Find your drive’s identifier (e.g.,disk2s1). - Type
diskutil mount /dev/disk2s1(replace with your identifier). - If that fails, try
diskutil repairDisk /dev/disk2(use the disk identifier, not the slice).
If these commands return errors, the drive’s file system is likely beyond repair without data recovery software.
Frequently Asked Questions
Why does my Seagate drive mount on one Mac but not another?
Likely a difference in macOS version or settings. Older macOS versions may not support APFS, or the drive might be formatted with a file system that one Mac can read but the other can’t. Check the format on the working Mac and consider reformatting to exFAT for maximum compatibility.
Can I recover data from a drive that won’t mount?
Yes, often. If the drive appears in Disk Utility, you can try using data recovery software like Disk Drill or PhotoRec before reformatting. If the drive doesn’t appear at all, the issue may be physical—contact a professional data recovery service, but be prepared for high costs.
Why does my drive mount but then unmount after a few seconds?
This is usually a power issue. The drive isn’t getting enough power from the USB port, especially if it’s a large desktop drive or you’re using a hub. Try a powered USB hub, a different port, or the drive’s own power adapter.
Should I use APFS or exFAT for my Seagate drive?
If you only use the drive with Macs, APFS is best. If you need to share files with Windows computers, exFAT is the better choice—it works on both operating systems without extra software. Avoid NTFS for Mac-only use.
My Seagate drive is making a clicking noise. Can I fix it myself?
Clicking sounds usually indicate a mechanical failure. Do not attempt to open the drive—this can make data recovery harder. Immediately back up any data you can access, and stop using the drive. Professional recovery is your best option if the data is important.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.