3D Printing Pens: What to Know Before Choosing
- Average draw speed
- m/min
- Result
- Print time
- 10 min
- You entered
- Filament length used
- 1 m
- You entered
Before you buy a 3D printing pen, know that it extrudes heated plastic filament that you guide by hand to draw freeform objects, and the key choices are filament type, nozzle temperature range, and whether you want adjustable speed and temperature. These pens are not precision printers; they are handheld drawing tools that require practice, and the right model depends on what you plan to make and your budget.
Formula
The calculator above estimates your average filament usage rate when drawing with a 3D pen. The formula is:
Rate = Filament length used ÷ Print time
Where:
- Filament length used (l) = the length of filament consumed, in meters.
- Print time (t) = the total time you were actively extruding, in minutes.
- Rate = the average speed at which you consumed filament, in meters per minute.
This is a simple way to estimate how fast you draw or how much filament a project might need. For example, if you use 1 meter of filament in 10 minutes, your average rate is 0.1 m/min.
Worked Example
Using the default values from the calculator:
- You print for 10 minutes.
- You use 1 meter of filament.
- Rate = 1 ÷ 10 = 0.1 meters per minute.
The calculator shows 0.10 m/min as the result, matching the formula.
How 3D Printing Pens Work
A 3D printing pen is essentially a handheld extruder. It feeds a plastic filament (usually PLA or ABS) through a heated nozzle, melting it, and then you push the melted plastic out as you move the pen. The plastic cools and hardens quickly, allowing you to draw in the air or on surfaces. Most pens have a button or trigger to control filament flow, and many allow you to adjust temperature and extrusion speed. The filament is pulled by a small motor inside the pen, so you don’t push it manually—you just guide the nozzle.
Key Factors to Consider Before Buying
- Filament compatibility: Most pens accept 1.75mm filament, but some use 3mm. Check which size the pen takes and whether it supports PLA, ABS, PETG, or other materials.
- Temperature control: If you want to use different plastics, you need a pen with adjustable temperature. PLA melts around 180–220°C, ABS around 210–250°C, and PETG around 230–250°C. A fixed-temperature pen is limited to one type.
- Speed control: Adjustable extrusion speed helps with fine detail and thicker lines. Some pens have a slider or buttons for slow, medium, and fast.
- Nozzle type: Brass nozzles are common and fine for most use. Ceramic nozzles may be more durable but are less common.
- Power source: Most pens plug into a wall outlet. Some are battery-powered, but they tend to be less powerful and have shorter runtimes.
- Weight and ergonomics: A lighter pen is easier to control for long periods. Look for a comfortable grip and a trigger that doesn’t strain your finger.
- Safety features: Look for a pen with a heat-resistant tip cover and an automatic shutoff after idle time, especially if you have kids around.
- Price range: Budget pens start around $20–30, while mid-range models with temperature control and better build quality run $50–100. Professional models can exceed $150.
Common Problems and How to Avoid Them
One of the most common issues is filament jamming. This usually happens when the filament is not fed straight, the nozzle is clogged, or the temperature is too low. To prevent jams, always insert the filament straight and push it until you see it come out of the nozzle. If it clogs, you can often clear it by heating the pen and manually pushing the filament through, or by using the “clean” function if your pen has one.
Another problem is stringing or oozing—when melted plastic drips out even when you’re not pressing the trigger. This is often due to the temperature being too high or the nozzle being too close to the work surface. Lower the temperature slightly and keep the nozzle moving.
Warping is common with ABS because it cools and shrinks unevenly. PLA is less prone to warping and is easier for beginners. If you use ABS, try drawing on a heated surface or a piece of glass.
Finally, many users complain that the pen stops extruding after a few minutes. This is often because the filament has a tangle or a kink. Make sure the filament spool is free and the filament is not bent at a sharp angle as it enters the pen.
Comparing 3D Pens to 3D Printers
3D pens are not a substitute for 3D printers. A printer builds objects layer by layer automatically, following a digital model, and can create precise, complex shapes. A pen requires you to move your hand to create each line, so it is more like drawing with a hot glue gun. Pens are cheaper, portable, and great for repairs, art projects, or adding details to printed objects. But they cannot produce the same accuracy or repeatability as a printer. If you want to make functional parts with tight tolerances, a printer is necessary. If you want to doodle in 3D or fix a broken plastic part, a pen is a fun and affordable tool.
Costs and Filament Considerations
The initial cost of the pen is just the beginning. You’ll need filament, which typically costs $15–30 per kilogram for PLA or ABS. A 1kg spool is enough for many small projects. Some pens come with a few sample filaments, but they are usually very short. Over time, the cost of filament can exceed the cost of the pen itself, especially if you practice a lot. Also, consider the cost of replacement nozzles, which wear out over time, and a cleaning tool (a thin needle) to clear clogs.
Safety and Usage Tips
3D pens get hot—nozzle temperatures can reach 250°C (482°F). Always keep the nozzle away from skin and flammable materials. Use a heat-resistant mat or a glass surface to draw on. Do not touch the melted plastic immediately after extrusion; it cools quickly but can still be warm. Ventilate the area when using ABS, as it emits fumes. PLA is generally considered safer and has a pleasant smell. Keep the pen out of reach of small children, and never leave it unattended while plugged in. When changing filament, wait for the pen to heat up, then pull the old filament out quickly and insert the new one.
Alternatives to 3D Pens
If you’re interested in 3D creation but not sure a pen is right, consider these alternatives:
- 3D printer: For precise, automated printing of objects from digital designs.
- Hot glue gun: Cheaper and safer, but not as neat for fine details.
- Sculpting materials: Clay, polymer clay, or air-dry clay for hand-sculpted models.
- Wire bending: Using bendable wire and pliers to create 3D line art.
- CNC router or laser cutter: For cutting shapes from flat material, not for freeform 3D drawing.
Each has its own learning curve and cost. A 3D pen is unique in that it lets you draw in the air, but it requires steady hands and patience.
Frequently Asked Questions
What filament is best for a beginner?
PLA is the best choice for beginners because it melts at a lower temperature, produces fewer fumes, and is less prone to warping. It’s also widely available and inexpensive. ABS is stronger but more difficult to work with due to higher temperatures and warping.
Can I use any 1.75mm filament in a 3D pen?
Most 1.75mm filaments will work, but the pen must be able to reach the temperature required for that material. For example, PETG needs a higher temperature than PLA. Always check the pen’s temperature range and the filament’s recommended printing temperature.
How long does a 3D pen last?
With proper care, a quality 3D pen can last for years. The most common failure points are the heating element and the motor that feeds filament. Regular cleaning of the nozzle and avoiding overheating can extend its life. Budget pens may wear out faster.
Can I use a 3D pen to repair plastic objects?
Yes, you can use a 3D pen to fill cracks or weld plastic parts together, especially if the plastic is the same type as the filament. For example, you can repair a broken ABS part with ABS filament. The melted filament acts as a glue and filler. However, the repair may not be as strong as the original.
Do 3D pens need a computer or software?
No, 3D pens are completely manual. You don’t need a computer, software, or a digital model. You simply draw with your hand. This makes them very accessible and portable.
Are 3D pens safe for children?
3D pens are not recommended for children under 12 without adult supervision because of the hot nozzle. Some pens have a low-temperature mode (around 160°C) that is safer, but still hot. Always supervise and teach proper handling.
Related
Formula used
in t | Print time | min | 10 | 0 in l | Filament length used | m | 1 | 0 out rate | Filament usage rate | m/min | l / t | 2 out speed | Average draw speed | m/min | l / t | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.