ThisCalculator

Everyday

Microwave Turned Into Game Console? Yes, Really

Updated · Standard formula, shown below

Yes, a YouTuber has turned a microwave into a working video game console. The project, by the channel “The Slow Mo Guys” (Gav and Dan), replaced the microwave’s original control board with a custom PCB that runs a modified version of the classic game Doom, using the microwave’s existing buttons and display for input and output. It’s a real, functional build, not a mockup or a video edit.

Background: Why a Microwave?

The idea of running Doom on unusual hardware is a long-running internet challenge. The game was famously ported to everything from ATMs to pregnancy tests, and the microwave project is a continuation of that trend. The Slow Mo Guys, known for their high-speed camera work, took on the challenge as a way to combine their engineering curiosity with a pop-culture meme. The result was a fully playable (if tiny) version of Doom running on a 1980s-era microwave oven.

How It Works: The Hardware and Software

The original microwave’s control board was removed and replaced with a custom PCB designed by the team. This new board contains a microcontroller (an ESP32, a common chip for hobby projects) that runs a port of Doom. The microwave’s existing keypad is used for movement and firing, and the original VFD (vacuum fluorescent display) shows the game in monochrome. The team even added a small speaker to play the game’s sound effects.

  • Display: The VFD is a low-resolution, single-color display, so the game appears as a blocky, green-on-black rendering.
  • Controls: The microwave’s buttons are mapped to game actions—for example, “Popcorn” might fire, “Defrost” might move forward.
  • Power: The microwave’s internal power supply is repurposed to run the new board, so it still plugs into a wall outlet.

The Build Process: From Microwave to Console

The team documented the process in a video, showing the steps involved:

  1. They disassembled the microwave, carefully removing the high-voltage components (a safety hazard they addressed with proper precautions).
  2. They designed a new PCB that would fit in the original enclosure and interface with the keypad and display.
  3. They wrote custom firmware that includes a Doom port and maps the controls.
  4. They tested the build, making adjustments to the button mapping and display refresh rate.

Common Misconceptions

One common question is whether the microwave still works as a microwave. It doesn’t—the magnetron (the part that produces microwaves) is disconnected, and the new board doesn’t control it. The project is purely a gaming device. Another misconception is that it’s a fake or a video edit. The Slow Mo Guys have a reputation for real experiments, and the video shows the game being played in real time, with the player’s hands visible on the keypad.

Costs and Feasibility

Building this yourself would require a microwave (often available for free or cheap on classifieds), an ESP32 board (around $5-10), a custom PCB (a few dollars for a small batch), and some soldering skills. The total cost is likely under $50, but the time and expertise needed are significant. The team had to reverse-engineer the keypad matrix and display protocol, which is not trivial. For most people, it’s a fun video to watch rather than a weekend project.

Alternatives: Running Doom on Other Devices

If you want to play Doom on something unusual but easier than a microwave, there are simpler options:

  • Smartphones: Official and unofficial ports run on Android and iOS.
  • Raspberry Pi: A popular DIY project that can run Doom with a retro controller.
  • Web browsers: There are JavaScript ports that run in any modern browser.
  • Printers: Some older printers have been hacked to run the game, but the process is also complex.

Safety Considerations

Working on a microwave is dangerous. The high-voltage capacitor can hold a lethal charge even after the microwave is unplugged. The Slow Mo Guys explicitly warned viewers not to attempt the project without proper training. If you’re curious about electronics, start with safer projects like an Arduino or Raspberry Pi, and leave microwave disassembly to professionals.

Frequently Asked Questions

Q: Can I play Doom on my own microwave?
A: Not without significant modifications. You’d need to replace the control board with a custom one, which requires electronics knowledge and safety precautions. The original microwave’s high-voltage parts are dangerous.

Q: Is the microwave still functional as a microwave?
A: No. The magnetron is disconnected, and the new board doesn’t control it. It’s a dedicated gaming device now.

Q: What game is it running?
A: The team ported Doom, the 1993 classic first-person shooter. They used a version of the game that runs on the ESP32 microcontroller.

Q: How did they get the game to display on the microwave’s screen?
A: The original VFD (vacuum fluorescent display) is a low-resolution, monochrome screen. They wrote a custom driver that allows the ESP32 to send video signals to it, showing the game in green-on-black.

Q: Is the project open source?
A: The team hasn’t released the schematics or code publicly, so it’s not a DIY kit. It was a one-off project for their channel.

Q: Could I do this with a modern microwave?
A: Modern microwaves use different displays and keypads, so the process would be different. The project used a vintage microwave with a VFD, which is easier to interface with than modern LCDs.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.