ThisCalculator

Everyday

Variable Aperture Phone Cameras: Why They’re Back

Updated · Standard formula, shown below

Phone cameras are bringing back variable aperture to let a single lens adapt to different lighting conditions, shifting from the fixed f/1.8-to-f/2.4 lenses of the past decade to a two-stage aperture like f/1.4 and f/2.4. This change gives you more control over exposure and depth of field, solving a problem that fixed-aperture lenses created when they became the smartphone standard. Here’s the background, how it works, and what it means for your photos.

Why Fixed Aperture Became the Norm

From roughly 2015 to 2022, nearly every flagship phone camera had a fixed aperture—usually around f/1.8 or f/2.0. The reasons were practical: a fixed aperture is simpler to manufacture, easier to seal against dust and water, and lets the lens be thinner. Smartphone lenses are tiny, and adding moving parts inside them was risky. The trade-off was that the lens could not physically adjust to bright sunlight or a dark indoor scene, so the camera had to rely on the sensor and software to compensate.

That worked well enough for a while. Sensors got bigger, and computational photography (HDR, night mode, multi-frame stacking) made fixed-aperture cameras flexible. But there was a limit: in bright light, a fixed f/1.8 lens lets in more light than needed, forcing the camera to shorten exposure time or lower ISO, which can reduce dynamic range. In low light, a fixed f/2.4 lens would struggle. The industry solved this by adding larger sensors and faster lenses, but the physical aperture stayed stuck.

How Variable Aperture Works in a Phone

Variable aperture in a phone uses a small mechanical iris—similar to what you’d find in a traditional camera lens—but scaled down to fit inside a module that’s only a few millimeters thick. The iris blades move to open or close the opening, changing the f-stop. In most implementations, the lens offers two or three fixed stops (e.g., f/1.4, f/2.0, f/2.4) rather than a continuous range, because a continuous iris is harder to miniaturize and more prone to failure.

The mechanism is usually driven by a tiny motor or a magnetic actuator. When you tap to focus or switch to a different shooting mode, the camera decides which aperture to use based on the scene. In bright daylight, it might close down to f/2.4 to reduce light and increase sharpness. In low light, it opens to f/1.4 to gather more light. Some phones also let you manually select the aperture in a pro mode.

What Variable Aperture Actually Improves

  • Exposure control: A smaller aperture (higher f-number) reduces the amount of light hitting the sensor, so you can use a slower shutter speed in bright light without overexposing. This helps with motion blur and allows a lower ISO.
  • Depth of field: A wider aperture (lower f-number) creates a shallower depth of field, blurring the background more. This is useful for portraits and close-ups. A narrower aperture keeps more of the scene in focus, which is better for landscapes.
  • Sharpness: Many lenses are sharpest when stopped down slightly; a variable aperture lets the camera choose the sweet spot for the lighting conditions.
  • Dynamic range: By controlling light at the lens, the sensor can work in a more optimal range, reducing blown highlights or crushed shadows.

In practice, the most noticeable benefit is in bright outdoor shots: instead of relying on software to tone down highlights, the lens physically reduces light, preserving more detail in the sky and on white surfaces.

Why It Disappeared and Why It’s Returning

The first wave of variable aperture phones appeared around 2018–2019, with models like the Samsung Galaxy S9 and S10 offering f/1.5 and f/2.4. But the feature was dropped in later models. The reasons were cost, complexity, and the fact that most users didn’t notice the difference. The mechanical iris added a point of failure, and the aperture change was often subtle in photos.

Now, variable aperture is making a comeback because of two trends: larger sensors and computational photography limits. Larger sensors (like 1-inch types) need to control light more precisely, and a fixed lens can’t always do that. Also, software-based bokeh (portrait mode) has reached a plateau—real optical depth of field from a wider aperture looks more natural. Manufacturers are also competing on camera specs, and variable aperture is a tangible differentiator that reviewers and enthusiasts can measure.

Common Problems and Misconceptions

One misconception is that variable aperture gives you a continuous range like a DSLR lens. In phones, it’s usually just two or three stops. Another is that a wider aperture always means better photos—in bright light, it can cause overexposure and reduced sharpness. Some users worry about the mechanical reliability; while it’s a moving part, modern modules are tested for hundreds of thousands of cycles, and most phones with the feature have not seen widespread failure reports.

A common problem is that the camera may switch apertures at an unexpected moment, causing a slight change in exposure or depth of field mid-scene. This is usually handled by the camera’s auto mode, but it can be jarring in video. Also, variable aperture lenses are often slightly thicker, which can make the camera bump larger.

How to Choose a Phone with Variable Aperture

If you’re considering a phone with this feature, check what apertures are offered and how they’re used. Look for:

  • Number of stops: Two stops (e.g., f/1.4 and f/2.4) is common; three is rare.
  • Manual control: Does the pro mode let you select the aperture? Some phones only auto-switch.
  • Sensor size: Variable aperture is more impactful on larger sensors (1/1.5-inch or bigger).
  • Lens quality: Read reviews for sharpness at each aperture, as some lenses are soft wide open.

Also consider whether you actually need it. If you mostly shoot in good light and rely on portrait mode, a fixed f/1.8 lens with good software may be sufficient. Variable aperture is a nice-to-have, not a necessity.

Alternatives to Variable Aperture

Manufacturers use other ways to achieve similar results. Some use a physical ND (neutral density) filter that slides in front of the lens in bright light, like in some Sony Xperia phones. Others rely on dual or triple lenses with different fixed apertures—e.g., a wide f/1.8 and a telephoto f/2.4—and the camera switches between them. Computational photography can simulate depth of field, but it can’t reduce the light hitting the sensor. For video, some cameras use electronic ND filters, which are software-based and can introduce artifacts. Variable aperture is the only method that physically changes the lens opening, offering the most direct control.

Frequently Asked Questions

Is variable aperture worth it on a phone?

It depends on your usage. If you shoot a lot in bright sunlight or want natural bokeh without software, it can improve image quality. For most casual users, the difference is subtle, and software already handles exposure well. It’s more of a pro feature.

Does variable aperture affect video recording?

Yes, it can. In video, the camera might change aperture to adjust exposure, which can cause a visible shift in brightness or depth of field. Some phones lock the aperture during video to avoid this, or you can manually set it.

Can I manually set the aperture on any phone with variable aperture?

Not always. Some phones only auto-switch, while others offer manual control in a pro or expert mode. Check the camera app’s settings before buying.

Will variable aperture make my photos sharper?

In bright light, a smaller aperture can improve sharpness by reducing lens aberrations and diffraction. In low light, a wider aperture lets you use a faster shutter speed, reducing blur. But the effect is modest compared to sensor quality and processing.

Is variable aperture fragile?

It’s a moving part, but it’s designed to be durable. Most phones with the feature have been rated for hundreds of thousands of actuations, similar to OIS (optical image stabilization). Dropping your phone is still the main risk.

Why don’t all phones have it?

Cost and size. The mechanical iris adds complexity and thickness, and not all brands see it as a priority. As the technology matures and costs drop, it may become more common, but for now it’s a premium feature.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.