How to Reset Your Mac SMC: When & How
Resetting the System Management Controller (SMC) on an Intel-based Mac can fix issues with power, battery, fans, and other low-level hardware functions. The exact steps depend on your Mac model and whether it has the Apple T2 Security Chip or an older Intel processor, and you should only reset it after trying simpler fixes like restarting and resetting NVRAM.
What the SMC Does
The SMC is a subsystem on Intel-based Macs that manages low-level hardware functions. It controls things like the power button, battery and charging, thermal and fan management, the keyboard backlight, and the behavior of the indicator lights (such as the sleep light or the MagSafe connector light). It also handles the sudden motion sensor (SMS) that parks the hard drive if the Mac is dropped, and it manages the backlight for the display on some models.
The SMC is not the same as the main processor or the operating system. It runs independently, which is why a software glitch or a macOS update can sometimes leave it in a bad state. When that happens, the Mac may behave strangely even though macOS itself appears to be running fine.
When You Should Reset the SMC
You should consider resetting the SMC if you are experiencing any of the following symptoms, and you have already tried restarting your Mac and resetting NVRAM (non-volatile random-access memory):
- Battery does not charge, or the charge percentage is stuck even when the charger is plugged in.
- The battery drains very quickly, or the Mac shuts down unexpectedly even when the battery shows a reasonable charge.
- Fans spin at high speed constantly, even when the Mac is idle and cool.
- The Mac does not wake from sleep, or it sleeps when it should not.
- The keyboard backlight, or the display backlight on some models, does not respond to ambient light changes or manual controls.
- The Mac is slow to respond to the power button, or it does not turn on at all.
- The MagSafe power adapter light (on older models) does not show the correct status.
If your Mac is an Apple silicon model (M1, M2, M3, etc.), there is no SMC to reset. Those models handle these functions differently, and the troubleshooting steps are different.
Before You Reset: Try These First
Resetting the SMC should not be your first move. It is a low-level reset that can sometimes cause minor settings to revert, so it is best to try the following in order:
- Restart your Mac normally.
- Force quit any unresponsive apps.
- Reset NVRAM (or PRAM on older models). To do this, shut down, then turn on and immediately hold Option+Command+P+R for about 20 seconds on an Intel Mac. On Apple silicon, NVRAM resets happen automatically during startup.
- Check if the issue is related to a specific app or peripheral by disconnecting all external devices.
If the problem persists after these steps, then an SMC reset is a reasonable next step.
How to Reset the SMC on Different Mac Models
The steps differ depending on whether your Mac has the Apple T2 Security Chip, and whether it is a laptop or a desktop. Here are the methods for each type.
Macs with the Apple T2 Security Chip
If your Mac is a 2018 or later model (except the Mac Pro 2019, which has a different method), it likely has the T2 chip. To reset the SMC on these models:
- Shut down your Mac.
- Press and hold the power button for 10 seconds, then release it.
- Wait a few seconds, then turn your Mac on normally.
This method works for both laptops and desktops with the T2 chip, including the iMac Pro and the Mac Pro 2019 (with the power button on the front).
Intel MacBooks with a Removable Battery (2017 and earlier)
For older MacBook and MacBook Pro models with a removable battery (roughly 2017 and earlier, but check your model):
- Shut down your Mac.
- Remove the battery.
- Press and hold the power button for 5 seconds.
- Reinstall the battery.
- Turn on your Mac.
Intel MacBooks with a Non-Removable Battery
For most MacBook Pro and MacBook Air models from 2012 through 2017 (and some later ones without the T2 chip), the battery is built in. The reset method is:
- Shut down your Mac.
- On the left side of the keyboard, press and hold Shift+Control+Option (the left Option key) and the power button simultaneously. Hold them for 10 seconds.
- Release all keys, then turn on your Mac.
Note: On models with the Touch Bar, the power button is the Touch ID button on the right side of the Touch Bar. The key combination is the same.
Intel Desktop Macs (iMac, Mac mini, Mac Pro)
For desktop Macs without the T2 chip:
- Shut down your Mac.
- Unplug the power cord.
- Wait 15 seconds.
- Plug the power cord back in.
- Wait 5 seconds, then turn on your Mac.
What an SMC Reset Actually Does
Resetting the SMC restores its default settings. It does not erase your data or reinstall macOS. It may reset some low-level settings like the battery charge threshold, fan behavior, and the sudden motion sensor calibration. It does not affect your files, apps, or personal settings. After the reset, the SMC will re-initialize and begin managing hardware functions normally.
It is common for the fans to spin at full speed for a few seconds after the reset, and the battery percentage may show a different value. This is normal and should settle within a minute or two.
Common Misconceptions and Mistakes
One common misconception is that resetting the SMC will fix any power-related issue, but it only helps when the SMC itself is stuck or corrupted. If the problem is a failing battery, a faulty charger, or a hardware failure, the reset will not help.
Another mistake is using the wrong key combination. For example, on a MacBook with a non-removable battery, pressing just Shift+Control+Option (without the power button) does nothing. Also, on T2 models, holding the power button for 10 seconds is the correct method, but holding it for too long may cause the Mac to start up in a different way.
Some users reset the SMC when they have a software issue like an app crashing. That is not the right fix. Always try restarting and resetting NVRAM first.
Frequently Asked Questions
Will resetting the SMC erase my data?
No. The SMC reset only affects low-level hardware settings. Your files, apps, and personal data are untouched.
How often should I reset the SMC?
Only when you have a specific problem that suggests an SMC issue. There is no maintenance benefit to resetting it regularly.
My Mac is Apple silicon (M1/M2). Do I need to reset the SMC?
No. Apple silicon Macs do not have an SMC. If you have power, fan, or battery issues, restart your Mac, update macOS, and check the battery health in System Settings. If the problem persists, contact Apple Support.
What is the difference between resetting SMC and NVRAM?
NVRAM stores settings that macOS reads at startup, like startup disk and display resolution. SMC manages hardware functions. You usually reset NVRAM first, then SMC if needed.
I have a MacBook Pro from 2018 with Touch Bar. Which method do I use?
That model has the T2 chip, so use the T2 method: shut down, hold the power button for 10 seconds, then turn on.
After resetting the SMC, my fans are loud. Is that normal?
Yes, it is common for fans to run at full speed for a short time after the reset. They should calm down within a minute or two. If they stay loud, there may be another issue.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.