ThisCalculator

Everyday

HDMI ARC Port Explained: What It Is & How to Use

Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered

An HDMI ARC (Audio Return Channel) port on your TV is an HDMI input that can also send audio from the TV back to a soundbar, AV receiver, or other audio device. You use it to hear TV apps, broadcast TV, or connected sources through external speakers without a separate optical or RCA audio cable. This article explains what ARC is, how it works, how to set it up, and how it differs from the newer eARC standard.

What Does ARC Stand For?

ARC stands for Audio Return Channel. It is a feature of the HDMI specification, first introduced in HDMI 1.4 (released in 2009). The name describes exactly what it does: it provides a channel for audio to return from the TV back to an audio device over the same HDMI cable that carries video from the source to the TV.

Before ARC, if you had a Blu-ray player plugged into your TV and a soundbar, you needed two audio paths: one from the player to the soundbar (for the movie’s sound) and one from the TV to the soundbar (for TV broadcasts and apps). ARC eliminated the second cable by allowing the TV’s internal audio (from its tuner, smart apps, or any source connected to other HDMI ports) to travel back down the HDMI cable to the soundbar or receiver.

ARC is a standard feature, not a proprietary or informal term. You will find it labeled on TVs, soundbars, and AV receivers from every major manufacturer. The label may appear as “ARC,” “HDMI ARC,” or “ARC eARC” on newer models.

How HDMI ARC Works

An HDMI cable contains multiple data channels. The main ones carry video and audio from a source to a display (upstream). ARC uses a previously unused pair of conductors in the cable to carry audio in the opposite direction—from the TV back to the source device. This return channel is bidirectional but not simultaneous: it can send audio either upstream or downstream, not both at the same time.

ARC supports up to 5.1 channels of compressed audio, including Dolby Digital and DTS. It does not support high-bandwidth formats like Dolby Atmos with lossless audio or DTS:X. For those, you need eARC (Enhanced Audio Return Channel), introduced in HDMI 2.1, which supports up to 32 audio channels and high-bitrate formats.

The connection also carries CEC (Consumer Electronics Control) commands, so when you turn on your TV, it can automatically turn on the soundbar and switch to the correct input. This is why ARC is often paired with CEC in settings menus.

How to Identify the ARC Port on Your TV

Look at the HDMI ports on the back or side of your TV. The ARC port is usually labeled “ARC” directly next to the port, or it may be labeled “HDMI 1 (ARC)” or “HDMI 2 (ARC).” On some models, the label is printed on the rear panel, while on others it may be in the user manual or on-screen menu.

If you don’t see a label, check the TV’s settings menu under “Sound” or “Audio Output.” It will often list which HDMI port has ARC enabled. If you have multiple HDMI ports, only one will support ARC—usually HDMI 1 or HDMI 2, but this varies by brand.

If you still can’t find it, consult the TV’s user manual or look up the model number online. The manual will specify which port is ARC.

Setting Up ARC: Step-by-Step

  1. Connect the audio device to the ARC port. Plug one end of an HDMI cable into the ARC-labeled port on your TV and the other end into the ARC-labeled port on your soundbar or AV receiver. Both devices must have ARC support.
  2. Enable ARC on the TV. Go to your TV’s settings menu. Look for “Sound,” “Audio Output,” or “HDMI ARC.” Turn on ARC or set the audio output to “HDMI ARC.” Some TVs automatically enable ARC when they detect a compatible device.
  3. Enable ARC on the audio device. On the soundbar or receiver, select the HDMI ARC input. Some devices have a dedicated ARC button or menu setting.
  4. Enable CEC (optional). CEC is often called by brand names like Anynet+ (Samsung), BRAVIA Sync (Sony), or SimpLink (LG). Turn it on on both devices to allow automatic power and input switching.
  5. Test the connection. Play audio from a TV app or a connected device. The sound should come out of the soundbar. If not, check the audio output settings and ensure the HDMI cable is securely connected.

ARC vs. eARC: What’s the Difference?

eARC (Enhanced Audio Return Channel) is an upgrade to ARC that was introduced in the HDMI 2.1 specification. It uses a separate data channel and higher bandwidth to support high-quality, uncompressed audio formats like Dolby TrueHD, DTS-HD Master Audio, and Dolby Atmos with lossless audio.

Key differences:

  • Bandwidth: ARC uses a limited channel (about 1 Mbps), while eARC supports up to 37 Mbps.
  • Audio formats: ARC supports compressed 5.1 (Dolby Digital, DTS). eARC supports up to 32-channel uncompressed audio and object-based formats.
  • Lip sync: eARC has automatic lip-sync correction, while ARC may require manual adjustment.
  • Compatibility: eARC requires HDMI 2.1 ports on both devices and a certified Ultra High Speed HDMI cable. ARC works with any HDMI 1.4 or later cable.

If you have a newer TV and soundbar that both support eARC, use eARC for the best audio quality. If not, ARC is perfectly fine for most TV watching and streaming, which uses compressed audio.

Common ARC Problems and Fixes

ARC can be finicky. Here are the most common issues and what to do:

  • No sound from the soundbar: Check that the TV’s audio output is set to “HDMI ARC.” Also make sure the soundbar is set to the ARC input. Try a different HDMI cable—some cables don’t support ARC.
  • Sound cuts out or is intermittent: This is often due to a poor cable connection or a cable that doesn’t meet the required speed. Try a shorter, high-quality HDMI cable.
  • ARC not working after a firmware update: Sometimes a TV update can reset settings. Go back to the audio output settings and re-enable ARC.
  • Lip sync issues: If audio lags behind video, check the TV’s audio delay settings. Some TVs have a “lip sync” or “AV sync” option. If you have eARC, it should auto-correct.
  • ARC port not labeled: If you can’t find the ARC port, check the manual or the TV’s on-screen settings. Some older TVs may have ARC on a specific port that isn’t clearly marked.

Alternatives to ARC

If your TV doesn’t have ARC, or if you’re having trouble, you have other options:

  • Optical cable (TOSLINK): This is the most common alternative. It carries the same compressed 5.1 audio as ARC, but it’s one-way—you can’t send audio back. You’ll need to connect the optical cable from the TV’s optical out to the soundbar’s optical in.
  • RCA analog cables: If your soundbar has analog inputs, you can use a 3.5mm or RCA cable. This only carries stereo sound, not surround.
  • Bluetooth: Many TVs and soundbars support Bluetooth, but it can have latency and lower audio quality. Not ideal for movies.
  • HDMI without ARC: If you have a source (like a Blu-ray player) that connects directly to the soundbar, you can run the soundbar’s HDMI output to the TV. This bypasses ARC but requires you to switch inputs on the soundbar to change sources.

Frequently Asked Questions

Do I need an ARC port if I have a soundbar?

Not necessarily. You can connect a soundbar to your TV with an optical cable or even Bluetooth. But ARC is the most convenient because it allows you to control everything with one remote and automatically switches audio from any source.

Can I use any HDMI port for ARC?

No, only the port labeled ARC (or eARC) on your TV supports the return channel. Other HDMI ports are input-only. Plugging your soundbar into a non-ARC port will not send audio back.

Does ARC work with all HDMI cables?

ARC was designed to work with standard HDMI cables, but in practice, some older or very long cables may not support it reliably. If you have issues, try a newer high-speed cable.

Is eARC worth it?

If you watch a lot of 4K Blu-rays or stream content with Dolby Atmos, eARC is worth it because it supports lossless audio. For regular TV and streaming, ARC is sufficient.

Can I use ARC and a regular HDMI device at the same time?

Yes. The ARC port is just a regular HDMI input that also has the return channel. You can plug a device like a streaming stick into it, and it will work normally. The audio return only activates when the TV is sending audio back to the audio device.

Why is my ARC port not working with my soundbar?

First, check that both devices support ARC and that you’re using the correct ports. Then check the TV’s audio output settings and make sure ARC is enabled. Try a different HDMI cable and restart both devices. If it still doesn’t work, try an optical cable as a fallback.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.