ThisCalculator

Everyday

Indirect Costs on Federal Research Grants

Updated · Standard formula, shown below

Indirect costs ($) 50,000.00 $
Total costs ($)
150,000.00 $
Result
Total direct costs ($)
100000 $
You entered
Indirect cost rate (%)
50 %
You entered

Universities can charge federal research grants for indirect costs (also called facilities and administrative, or F&A, costs) to cover the shared expenses of supporting research, such as building maintenance, utilities, library resources, and administrative staff. These costs are charged as a percentage of the direct costs (like salaries and equipment) using a rate negotiated between the university and the federal government. The exact amount depends on the university’s negotiated rate, the type of work, and the specific grant’s terms.

Formula

Indirect costs are calculated by multiplying the direct cost base by the negotiated indirect cost rate. The formula is:

Indirect Costs = Direct Cost Base × (Indirect Cost Rate / 100)

Where:

  • Direct Cost Base ($) – the total of direct costs that the rate applies to (often modified total direct costs, which excludes equipment, tuition, and subawards over $25,000).
  • Indirect Cost Rate (%) – the percentage negotiated with the federal government (e.g., 50% means $0.50 of indirect costs per $1.00 of direct costs).

Worked Example

Suppose a university has a negotiated indirect cost rate of 50% and the direct cost base is $100,000. Using the formula:

  1. Convert the rate to a decimal: 50% ÷ 100 = 0.50
  2. Multiply the direct cost base by the rate: $100,000 × 0.50 = $50,000
  3. Add to direct costs for total: $100,000 + $50,000 = $150,000

The calculator above gives the same result: indirect costs = $50,000, total = $150,000.

What Are Indirect Costs?

Indirect costs are expenses that are not easily tied to a specific research project but are necessary for the university to operate and support research. They fall into two main categories:

  • Facilities – building depreciation, maintenance, utilities, library costs, and interest on facility debt.
  • Administrative – general administration (e.g., president’s office), departmental administration (e.g., department chairs, clerical support), and sponsored projects administration (e.g., research offices, compliance staff).

These costs are real and significant. For example, a university must heat and light laboratories, maintain safety systems, and employ grants managers to ensure compliance with federal rules. Without indirect cost recovery, the institution would have to cover these costs from other sources, which could reduce its ability to support research.

How Indirect Cost Rates Are Set

The federal government does not set a single rate for all universities. Instead, each university negotiates an indirect cost rate with a federal “cognizant agency” – usually the agency that provides the most funding to that institution. The negotiation is based on the university’s actual costs, as documented in an annual financial report.

Rates are typically expressed as a percentage of a “modified total direct cost” (MTDC) base. MTDC usually excludes:

  • Equipment (items over $5,000)
  • Tuition and fees
  • Subawards over $25,000
  • Participant support costs
  • Patient care costs
  • Rent for off-campus facilities

For example, if a grant has $100,000 in salaries and supplies but $20,000 in equipment, the MTDC base would be $80,000. A 50% rate would yield $40,000 in indirect costs, not $50,000.

There are also different rates for different activities: research, instruction, and other sponsored activities. Research rates are usually the highest. Additionally, off-campus research may have a lower rate because the university is not providing facilities.

How Universities Charge Indirect Costs

When a university submits a grant proposal, it includes a budget that shows both direct and indirect costs. The indirect cost amount is calculated by applying the negotiated rate to the expected direct cost base. Once the grant is awarded, the university charges indirect costs to the grant as expenses are incurred, typically on a monthly basis.

For example, if a grant has a $100,000 direct cost budget and a 50% indirect rate, the university will charge $50,000 in indirect costs over the life of the project. This is often done proportionally – each time a direct cost is charged, a corresponding indirect cost is charged.

Some grants, like training grants or fellowships, may have a lower rate or a fixed amount. Also, some federal agencies (e.g., the Department of Health and Human Services) may have a statutory cap on indirect costs for certain grant types, such as a 10% cap for training grants.

Common Misconceptions

One common misconception is that indirect costs are “extra” money that universities pocket. In reality, they reimburse the university for real expenses already incurred. Another misconception is that all universities charge the same rate – rates vary widely, from around 20% to over 70%, depending on the institution’s size, facilities, and negotiated agreement.

Another frequent question is whether indirect costs can be waived. Yes, a university may choose to waive indirect costs on a grant, but this is rare because it means the university must absorb those costs. Some non-profit organizations or international partners may have lower rates or no rate, but for universities, the rate is a critical part of their research funding.

How to Find a University’s Indirect Cost Rate

If you need to know a specific university’s rate, you can:

  • Check the university’s sponsored programs office website – many publish their negotiated rates.
  • Ask the grants administrator at the university – they will provide the official rate agreement.
  • Look at the university’s financial statements or public records – sometimes rates are disclosed in annual reports.

For federal grants, the rate is usually stated in the grant award document. If you are a researcher, your university’s sponsored projects office is the best source.

Frequently Asked Questions

Can indirect costs be charged to all federal grants?

Most federal research grants allow indirect costs, but some types (like training grants) may have a lower rate or a fixed amount. Fellowships often do not allow indirect costs at all. Always check the specific grant announcement and the university’s policy.

What is the difference between indirect costs and direct costs?

Direct costs are expenses that can be specifically identified with a project, such as salaries of researchers, lab supplies, and equipment. Indirect costs are shared costs that support the project indirectly, like building maintenance and administrative support. They are not tied to a single project but are necessary for the research to happen.

Why do some universities have higher indirect cost rates than others?

Rates reflect the actual costs of the institution. Universities with large research facilities, extensive libraries, and complex administrative structures typically have higher costs and thus higher rates. The rate is negotiated based on documented expenses, so it varies.

Are indirect costs the same as overhead?

Yes, “overhead” is a common term for indirect costs. In federal grants, the official term is “Facilities and Administrative” (F&A) costs. They cover the same types of expenses.

Can a university charge indirect costs on a subaward?

Yes, but the subrecipient’s indirect costs are subject to the same rules. The pass-through entity (the prime recipient) must use the subrecipient’s negotiated rate, or if none, a de minimis rate of 10% of modified total direct costs, as allowed by federal regulations.

What happens if a university exceeds its negotiated indirect cost rate?

If a university charges more than the negotiated rate, the federal agency may disallow the excess and require the university to return the funds. This is why universities carefully track indirect cost charges to ensure compliance.

Related

Formula used
in t | Total direct costs ($) | $ | 100000 | 0
in r | Indirect cost rate (%) | % | 50 | 0
out indirect | Indirect costs ($) | $ | t * (r / 100) | 2
out total | Total costs ($) | $ | t + (t * (r / 100)) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.