DLSS 5 Supported GPUs: Full List & Frame Gen

DLSS 5 and its frame generation features are supported only on NVIDIA GeForce RTX 40-series and RTX 50-series graphics cards, as well as the RTX 50-series laptop GPUs. If you own an RTX 30-series or older card, you cannot use DLSS frame generation, though you can still use other DLSS features like Super Resolution and Ray Reconstruction. This article explains exactly which GPUs support DLSS 5, how the technology works, and what you need to know before upgrading.

Formula

The calculator above works out your average running pace and speed. The formula for pace is:

Pace (min/km) = Finish time (minutes) ÷ Distance (km)

And for speed:

Speed (km/h) = Distance (km) ÷ (Finish time (minutes) ÷ 60)

Where t is the total finish time in minutes and d is the distance in kilometers. The pace is expressed in minutes per kilometer, and speed in kilometers per hour.

Worked Example

Using the default values from the calculator: finish time = 50 minutes, distance = 10 km.

1. Pace = 50 ÷ 10 = 5.0 min/km
2. Speed = 10 ÷ (50 ÷ 60) = 10 ÷ 0.8333 = 12.0 km/h

So the average pace is 5:00 per kilometer, and the average speed is 12.0 km/h. This matches the calculator output.

When to Use This Calculator

Use this calculator when you want to know your average pace for a run, walk, or cycle. It is especially useful for training plans that specify target paces, or for checking whether you hit a goal time. You can also use it to convert pace to speed, which is helpful if you are comparing with treadmill settings or other devices that display speed instead of pace.

How to Read the Result

The pace result tells you how many minutes (and seconds) it takes to cover one kilometer. A lower pace means faster running. The speed result tells you how many kilometers you cover in one hour. For most runners, a typical easy run pace is between 6:00 and 8:00 min/km, while a fast runner might be under 4:00 min/km. The calculator gives a decimal number for pace (e.g., 5.5 min/km), which you can convert to minutes and seconds by multiplying the decimal part by 60 (0.5 × 60 = 30 seconds).

Common Mistakes

• Mixing units: If you enter distance in miles but think in kilometers, the pace will be wrong. Use 1 mile = 1.609 km if needed.
• Using seconds instead of minutes: The calculator expects minutes. If your finish time is 1 hour 10 minutes, enter 70, not 1.10.
• Rounding too early: Round only the final answer, not intermediate steps, to avoid small errors.

Limitations of the Formula

This calculator assumes a constant pace throughout the entire distance. In reality, most runners slow down or speed up. It also ignores elevation changes, terrain, and weather, which can significantly affect your actual pace. For a more accurate training analysis, consider using a GPS watch that records splits and elevation profile.

Frequently Asked Questions

What is a good pace for a beginner?

A beginner runner might start with a pace of 8:00 to 10:00 min/km. This is a comfortable conversational pace. Over time, as fitness improves, the pace will naturally become faster. It is more important to build endurance than to chase a specific pace early on.

How do I convert min/km to min/mile?

To convert min/km to min/mile, multiply the pace by 1.609. For example, 5:00 min/km is about 8:03 min/mile. You can also use the calculator by entering distance in miles and time in minutes, then the pace will be in min/mile.

Why does my GPS watch show a different pace?

GPS watches measure pace in real-time using satellite data, which can be affected by signal loss, hills, and turns. They also use a rolling average that may differ from the overall average pace. The calculator gives the average pace for the entire run, which is what a race result would show.

Can I use this for cycling?

Yes, the same formula works for any activity where you know the distance and time. Just enter the total time and distance for your ride. The result will be your average speed and pace per kilometer.

What if I run on a treadmill?

Treadmill pace is usually set in min/km or min/mile, but the treadmill may not be perfectly calibrated. If you run at a constant speed on a treadmill, you can use the distance and time shown on the display to calculate your pace, but note that most treadmills assume a flat surface and no wind resistance.

Related

• Hardware Encoding Power Cost for 24/7 OBS Streaming
• Arc Raiders High Gain Antenna: All Materials & Rewards
• Crimson Desert Flight Skill: How It Works

in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2