ThisCalculator

Everyday

Turn Wyze Security Camera Into Webcam

Updated · Standard formula, shown below

Yes, you can turn a Wyze security camera into a webcam for your computer. The method depends on your Wyze model: older Wyze Cam v1, v2, and Pan v1 support a direct USB connection, while newer models (Wyze Cam v3, v4, and Pan v2) do not and require a wireless workaround using the Wyze app’s RTSP stream or a third-party virtual camera tool.

Why Use a Wyze Camera as a Webcam?

Wyze cameras are inexpensive, widely available, and often already sitting on a shelf. Repurposing one as a webcam saves money compared to buying a dedicated 1080p or 4K webcam, and the image quality is often comparable for video calls, streaming, or recording. However, there are trade-offs: Wyze cameras lack built-in microphones that work over USB, have a wider field of view than typical webcams, and require a constant power source. For a home office setup where you already own a Wyze camera, the appeal is obvious—you get a usable webcam without spending extra.

Which Wyze Cameras Support USB Webcam Mode?

Only the original Wyze Cam v1, Wyze Cam v2, and Wyze Cam Pan v1 have a native USB webcam mode. These models were designed with a micro-USB port that can carry video data when connected to a computer. The newer Wyze Cam v3, Wyze Cam v4, Wyze Cam Pan v2, and Wyze Cam Floodlight do not support this mode—their USB ports are for power only. If you have a v3 or later, you cannot simply plug it in; you must use the wireless RTSP method described below.

Method 1: Direct USB Connection (For v1, v2, Pan v1)

This is the simplest method and requires no extra software beyond the Wyze app.

  1. Power off the camera and remove any microSD card.
  2. Connect the camera to your computer using a micro-USB cable that supports data transfer (not a charge-only cable).
  3. Open the Wyze app on your phone, tap the camera’s settings gear, and look for a “USB Webcam” or “Webcam Mode” option. If it doesn’t appear, update the camera firmware via the app first.
  4. Enable the mode. The camera’s status light will change, and your computer should recognize it as a standard UVC (USB Video Class) camera.
  5. Select the Wyze camera as your video source in Zoom, Teams, OBS, or any app that lists available cameras.

Note that the camera’s internal microphone will not work in this mode. You will need a separate USB microphone or your computer’s built-in mic for audio.

Method 2: Wireless RTSP Streaming (For All Models)

For newer Wyze cameras, or if you prefer a wireless setup, you can use the camera’s RTSP (Real-Time Streaming Protocol) feed. Wyze officially offers an RTSP firmware for some models, but it has been deprecated for newer ones. Instead, the current approach is to use the Wyze app’s built-in RTSP feature (available on v3 and later with a Cam Plus subscription) or a third-party tool like “Wyze Bridge” or “RTSP firmware” from the Wyze community.

Once you have an RTSP stream URL (it looks like rtsp://username:password@ipaddress/live), you need a virtual camera software on your computer to convert that stream into a webcam feed. Popular options include OBS Studio with the “Virtual Camera” plugin, or VLC with a virtual camera extension. OBS is the most common choice because it’s free and widely documented.

  1. Install OBS Studio on your computer.
  2. In OBS, add a new “Media Source” and paste your RTSP URL.
  3. Adjust the canvas size to match the camera’s resolution (e.g., 1920×1080).
  4. Start the “Virtual Camera” from the controls panel.
  5. Select “OBS Virtual Camera” as your webcam in any app.

This method works with any Wyze camera that can output RTSP, including v3 and v4, but it adds latency (usually 1–2 seconds) and requires your computer and camera to be on the same network.

Common Problems and How to Fix Them

Users often run into a few recurring issues when repurposing Wyze cameras.

  • Camera not detected via USB: The cable is likely charge-only. Try a different cable known to transfer data. Also, ensure the camera is not in setup mode (blinking yellow).
  • No audio: As mentioned, USB mode disables the mic. For RTSP, the audio stream is often not included or is out of sync. Use a separate mic.
  • Image is upside down or mirrored: In OBS, right-click the source and select “Transform” → “Flip Vertical” or “Flip Horizontal.”
  • High latency or stuttering in wireless mode: Reduce the camera’s video quality in the Wyze app settings, or move the camera closer to your Wi-Fi router.
  • Camera disconnects after a few minutes: This is often due to the camera’s power-saving feature. In the Wyze app, disable “Sleep Mode” or “Motion Detection” while using it as a webcam.

Comparing USB vs. Wireless Methods

The direct USB method is more reliable and has zero latency, making it ideal for video calls where you need real-time interaction. The wireless RTSP method is more flexible—you can place the camera anywhere in the room—but introduces a slight delay and depends on your network quality. For streaming or recording, latency is less critical, so wireless is acceptable. For live meetings, USB is strongly preferred if your model supports it. If you have a v3 or newer, you have no choice but wireless, so plan for the delay by speaking slightly slower or accepting that the other party will see you a second later.

Frequently Asked Questions

Will this void my Wyze warranty?

Using the official USB webcam mode or the Wyze app’s RTSP feature does not void the warranty. However, installing third-party firmware (like custom RTSP firmware) may void it, and you risk bricking the camera if the flash fails. Stick to official methods unless you’re comfortable with the risk.

Can I use multiple Wyze cameras as webcams at once?

Yes, with the wireless RTSP method, you can add multiple RTSP sources in OBS and output them as separate virtual cameras (using OBS’s “Virtual Camera” feature only outputs one at a time, but you can use a plugin like “Virtual Cam” to create multiple). With USB, you can plug in multiple cameras if your computer has enough USB ports and bandwidth, and they will appear as separate devices.

Does the Wyze camera’s night vision work in webcam mode?

Yes, the camera’s IR LEDs and night vision will activate automatically in low light, just as they do in normal security mode. This can be a bonus for dark rooms, but be aware that the IR cut filter may cause a slight color shift during the day if the camera switches incorrectly.

What is the video quality like compared to a dedicated webcam?

Wyze v2 and v3 cameras output 1080p, which is the same as most mid-range webcams. The lens is wider (about 130 degrees) than a typical webcam (about 78 degrees), so your face may appear smaller and more of the background will be visible. The image is generally sharp, but the camera’s autofocus is fixed, so you must be within its focus range (usually 1.5 feet to infinity).

Can I use the Wyze app on my phone as a webcam instead?

No, the Wyze app does not have a feature to turn your phone into a webcam. The app is only for controlling the camera. However, you can use third-party apps like “DroidCam” or “EpocCam” with your phone’s camera, but that’s a separate solution.

Is there a way to get audio from the Wyze camera in webcam mode?

In USB mode, no. In wireless RTSP mode, the video stream often includes audio, but it may be out of sync. You can try enabling “Audio” in OBS’s media source settings, but the built-in microphone is not high quality. A dedicated USB mic is always a better choice for calls.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.