ThisCalculator

Everyday

Tech Supply Chains: Relocating Fragility, Not Removing It

Updated · Standard formula, shown below

Average pace 5.00 min/km
Average speed
12.00 km/h
Result
Finish time
50 min
You entered
Distance
10 km
You entered

Tech supply chains are relocating fragility, not removing it. While companies shift production to new countries to reduce dependence on a single region, the underlying vulnerabilities—concentrated manufacturing, single-source components, and logistics bottlenecks—persist in new forms. This article explains why the relocation of tech manufacturing often just moves the risk rather than eliminating it.

Background: The Original Fragility

For decades, the global tech supply chain has been heavily concentrated in a few regions. East Asia, particularly China, Taiwan, and South Korea, became the hub for semiconductor fabrication, printed circuit board assembly, and final device assembly. This concentration was efficient: it lowered costs, allowed rapid scaling, and built deep supplier ecosystems. However, it also created a single point of failure. A natural disaster, a geopolitical dispute, or a pandemic in one region could disrupt the entire global supply of electronics.

The COVID-19 pandemic exposed this fragility. Factory shutdowns in China and logistics gridlock at ports caused months-long delays for everything from cars to laptops. In response, many governments and corporations began pushing for “reshoring” or “friend-shoring”—moving production to politically aligned or geographically closer countries. The goal was to diversify and reduce risk. But the result has been a relocation of fragility, not its elimination.

How Supply Chain Relocation Works

Relocating a tech supply chain involves moving several layers of production:

  • Final assembly – The most visible step, where components are put together into finished devices (e.g., laptops, phones, servers).
  • Component manufacturing – Making parts like batteries, displays, and connectors.
  • Semiconductor fabrication – The most complex and capital-intensive step, producing chips on silicon wafers.
  • Raw material processing – Refining materials like lithium, cobalt, and rare earth elements used in electronics.

Companies typically start by moving final assembly to new locations like Vietnam, India, or Mexico. This is relatively easy because assembly is labor-intensive and less dependent on a deep local supplier base. However, the components still come from the original hub. For example, a phone assembled in India may still use a display from South Korea, a chip from Taiwan, and a battery from China. The final assembly is relocated, but the critical parts remain concentrated.

The New Fragility: Concentrated Suppliers and Single Sources

Even when production moves, the underlying fragility often remains because of supplier concentration. The semiconductor industry is a prime example. The most advanced chips are fabricated by a handful of companies, with Taiwan’s TSMC producing over 90% of the world’s most advanced logic chips. No amount of factory relocation changes this fundamental dependence. If a conflict or natural disaster disrupts Taiwan, the entire global chip supply is at risk, regardless of where final assembly occurs.

Similarly, many components have only one or two major suppliers. For instance, precision capacitors, certain types of sensors, and specialized glass are made by a few firms in specific countries. Relocating assembly does not address these single-source dependencies. A fire at a single factory in Japan can still halt production of a certain component used in devices assembled worldwide.

Logistics and Infrastructure Bottlenecks

Relocation also introduces new logistical challenges. New manufacturing hubs often lack the deep port infrastructure, transportation networks, and skilled labor pools that the original hub had. Vietnam, for example, has seen rapid growth in electronics assembly, but its ports and highways are struggling to handle the increased volume. This leads to congestion and delays, which are a different kind of fragility than before.

Additionally, moving production to multiple countries can increase the number of border crossings and customs clearance points. Each crossing adds time and potential for disruption—whether from regulatory changes, political tensions, or simple administrative errors. A supply chain spread across more countries is not necessarily more resilient; it can be more complex and harder to manage.

Cost and Trade-offs

Relocating supply chains is expensive. Building new factories, training workers, and establishing supplier networks requires massive capital investment. These costs are often passed on to consumers. For example, making a smartphone in the United States would cost significantly more than making it in Asia, due to higher labor costs and lack of supporting infrastructure. Companies must weigh the benefits of resilience against the increased costs.

There is also a trade-off in terms of speed to market. The original hub had a tightly integrated ecosystem where a prototype could be turned into a mass-produced product in weeks. New locations often lack this ecosystem, leading to longer development cycles. This can make companies less competitive, which is why many have been slow to fully relocate.

Common Misconceptions and Realities

A common misconception is that “reshoring” means a company produces everything domestically. In reality, most relocation is partial. A company might move final assembly to one country, but the components still come from the original hub. Another misconception is that diversification automatically increases resilience. In practice, if a company splits production between two countries that both depend on the same supplier for a key component, the fragility remains.

Another reality is that governments play a major role. Subsidies, tax incentives, and trade policies can make relocation economically viable, but they can also create new dependencies. For example, a country that subsidizes chip fabrication may become dependent on foreign equipment and materials for that fabrication, shifting the fragility rather than removing it.

Frequently Asked Questions

Q: Does moving production to another country make the supply chain more secure?
A: Not necessarily. It can reduce exposure to one specific geopolitical risk, but it often introduces new risks like infrastructure bottlenecks, lower skill availability, and continued reliance on the original hub for components. Security depends on the entire network, not just the final assembly location.

Q: Why don’t companies just build everything in one new place?
A: Building a complete ecosystem—from raw materials to finished products—takes decades and enormous investment. The original hub, like China, has a dense network of suppliers, logistics, and skilled labor that is hard to replicate quickly. Most companies choose to move only the final steps to save money and time.

Q: What is the biggest remaining risk in tech supply chains?
A: The concentration of advanced semiconductor manufacturing in Taiwan is widely considered the biggest single risk. A disruption there would affect virtually all electronic devices globally, regardless of where they are assembled. This is why many governments are investing in domestic chip fabrication, but progress is slow.

Q: How long does it take to relocate a supply chain?
A> It varies, but building a new semiconductor fab takes 3-5 years and billions of dollars. Even simpler assembly operations can take 1-2 years to set up and reach full capacity. The entire process of moving a complex supply chain can take a decade or more.

Q: Are there any benefits to the current relocation trend?
A: Yes, it can reduce dependence on a single country, which may lower the risk of a complete halt due to a localized event. It can also bring jobs and economic development to new regions. However, these benefits come with higher costs and new complexities.

Related

Formula used
in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.