ThisCalculator

Everyday

144 Hz Monitor: Is It Worth It?

Updated · Standard formula, shown below

Setting a monitor to 144 Hz refresh rate means configuring the display to redraw its image 144 times per second, which makes motion look noticeably smoother than a standard 60 Hz screen. You do this through your operating system’s display settings, and the benefit is most obvious when gaming or scrolling through long pages. This article explains what the setting does, how to enable it, and whether it’s right for your hardware and needs.

What Refresh Rate Means

Refresh rate is the number of times per second a monitor updates the image it shows, measured in hertz (Hz). A 60 Hz monitor updates 60 times per second; a 144 Hz monitor updates 144 times per second. The higher the number, the more frames per second (fps) the display can actually show. If your graphics card produces 200 fps but the monitor is 60 Hz, you only see 60 distinct images per second. With a 144 Hz display, you see up to 144 of those frames, which translates to less blur and a more responsive feel.

The human eye does not “see” in frames per second, but it does perceive differences in motion smoothness. Most people can tell the difference between 60 Hz and 144 Hz side by side, especially when moving a mouse cursor or panning a camera in a game. The jump from 60 to 144 is more noticeable than the jump from 144 to 240, which is why 144 Hz is the sweet spot for most users.

How to Set 144 Hz on Windows, Mac, and Console

The exact steps depend on your operating system and whether you’re using a desktop, laptop, or console. In all cases, you need a monitor that natively supports 144 Hz, a cable that can carry that signal (DisplayPort or HDMI 2.0 or newer), and a graphics card that can output it.

  1. Windows 10/11: Right-click the desktop and select Display settings. Scroll down and click Advanced display settings. Under Choose a refresh rate, select 144 Hz (or the highest available). Some laptops require you to change this in the graphics driver panel (NVIDIA Control Panel or AMD Radeon Software) instead.
  2. macOS: Go to System Settings → Displays. Hold the Option key and click Refresh Rate to see all supported rates. Select 144 Hz if your external monitor and cable support it. Many Macs only output 144 Hz over DisplayPort or USB-C to DisplayPort, not over HDMI.
  3. PlayStation 5 / Xbox Series X: These consoles support 120 Hz, not 144 Hz, so you would set them to 120 Hz in the console’s video output settings. The monitor will still run at 120 Hz, which is close to 144 but not identical. For PC gaming, you use the Windows method above.

If 144 Hz does not appear in the list, the most common causes are an old cable (HDMI 1.4 only supports 144 Hz at lower resolutions), a monitor that is set to a lower refresh rate by default, or a graphics driver that needs updating. Try a DisplayPort cable and check the monitor’s on-screen menu for a “gaming” or “overclock” setting.

What You Need: Cable, Port, and GPU

Refresh rate is not just a monitor setting; it depends on the whole chain. Here are the minimum requirements for 144 Hz at common resolutions:

  • 1080p at 144 Hz: DisplayPort 1.2 or HDMI 2.0 is enough. Most graphics cards from the last decade support this.
  • 1440p at 144 Hz: DisplayPort 1.2 or HDMI 2.0 works, but DisplayPort 1.4 or HDMI 2.1 is recommended for higher color depths. Older HDMI 1.4 caps out at 1080p 144 Hz.
  • 4K at 144 Hz: You need DisplayPort 1.4 with DSC (Display Stream Compression) or HDMI 2.1. Many 4K 144 Hz monitors only reach full refresh rate over DisplayPort.

Your graphics card also matters. Integrated graphics (like Intel UHD or AMD Radeon integrated) can output 144 Hz for desktop use and light games, but they cannot push high frame rates in modern 3D games. A dedicated GPU from the last few years is required for 144 fps in most titles. Check your GPU’s specifications for “DisplayPort 1.4” or “HDMI 2.1” support.

Do You Actually See 144 Hz? The FPS Myth

Many people believe the human eye cannot see beyond 60 fps, but that is a myth. The eye does not have a fixed frame rate; it continuously processes light and motion. In practice, most people can perceive the difference between 60 Hz and 144 Hz in a blind test. The improvement is most noticeable in fast-paced games (shooters, racing, fighting) and when scrolling text. The effect is less obvious in static images or slow movies.

Another common misconception is that you need a game running at exactly 144 fps to benefit. Actually, any frame rate above 60 fps benefits from a 144 Hz display. If a game runs at 100 fps on a 144 Hz monitor, you see 100 distinct frames per second, which is smoother than 60. If a game runs at 200 fps, you see 144 of those frames, which is still better than 60. The display simply shows each new frame as soon as it’s ready, up to its refresh limit.

Common Problems and How to Fix Them

Setting 144 Hz is usually straightforward, but issues do occur. Here are the most frequent problems and their solutions:

  • 144 Hz option missing: Update your graphics driver, try a different cable (preferably DisplayPort), and check the monitor’s on-screen menu for a “refresh rate overclock” or “gaming mode” that must be enabled first.
  • Screen flickers or goes black: This often happens with a marginal cable or an overclocked refresh rate. Lower to 120 Hz or 100 Hz, or replace the cable with a certified DisplayPort 1.4 or HDMI 2.1 cable.
  • Text looks blurry: Windows sometimes resets scaling when you change refresh rate. Go to Display settings → Scale and set it to 100% (or your preferred value). Also ensure you are using the monitor’s native resolution.
  • Games still show 60 fps: Check the game’s settings for a frame rate cap and disable it. Also make sure V-Sync is off in the game and in the GPU control panel, because V-Sync can lock to 60 Hz if the monitor is not detected correctly.
  • Monitor says “144 Hz” but feels like 60: Some monitors have a “response time” setting that adds processing lag. Enable “1ms” or “fast” in the monitor’s overdrive settings, and disable any “eye care” or “low blue light” modes that may reduce refresh rate.

144 Hz vs. 60 Hz vs. 240 Hz: Which Should You Choose?

If you are buying a new monitor, the choice is usually between 60 Hz, 144 Hz, and 240 Hz. Here is a practical comparison:

  • 60 Hz: Standard for office work and casual use. Fine for movies and static tasks. Most budget laptops and office monitors are 60 Hz.
  • 144 Hz: The best value for gamers and heavy productivity users. It is roughly 2.4 times smoother than 60 Hz and is now common on mid-range and high-end monitors. Prices have dropped significantly, making it the default recommendation for anyone who plays games.
  • 240 Hz: Mostly for competitive esports players who need the absolute lowest latency. The jump from 144 to 240 is much less noticeable than from 60 to 144. Only worth the extra cost if you are a serious FPS gamer with a powerful GPU.

For most people, 144 Hz is the sweet spot. It provides a clear improvement over 60 Hz without the high price and GPU demands of 240 Hz. If you do not play fast games, 60 Hz is perfectly fine, and you can save money.

Does 144 Hz Affect Battery Life or Eye Strain?

On a laptop, a 144 Hz display uses more battery than a 60 Hz display because the GPU has to render more frames per second. Many gaming laptops allow you to switch to 60 Hz in the power settings to extend battery life. On a desktop, the power difference is negligible.

Regarding eye strain, a higher refresh rate can actually reduce fatigue for some people because motion is smoother and there is less flicker, but it is not a medical fix. The biggest factors for eye comfort are brightness, contrast, and taking regular breaks. If you experience headaches with 144 Hz, try lowering to 120 Hz or 100 Hz, as some people are sensitive to the specific refresh rate.

Frequently Asked Questions

Is 144 Hz worth it for non-gamers?

Yes, if you spend hours scrolling through documents, spreadsheets, or websites. The smoother scrolling alone is noticeable and can make the display feel more premium. However, if you only watch movies and read static text, the benefit is minimal, and a 60 Hz monitor is fine.

Can my PC run 144 Hz?

Any PC can run the desktop at 144 Hz as long as the graphics card and cable support it. For gaming, you need a GPU that can produce more than 60 fps in the games you play. A mid-range card like an NVIDIA GTX 1660 or AMD RX 6600 can hit 144 fps in esports titles, but AAA games may require a high-end card.

Does 144 Hz work over HDMI?

Yes, but only if the HDMI port is version 2.0 or newer for 1080p, or 2.1 for 1440p/4K at 144 Hz. Older HDMI 1.4 is limited to 1080p at 144 Hz with reduced color, or 60 Hz at higher resolutions. DisplayPort is generally more reliable for high refresh rates.

Why does my monitor say 60 Hz even though it’s a 144 Hz model?

Most monitors default to 60 Hz out of the box. You must change the refresh rate in your operating system settings. If it still doesn’t show 144 Hz, check your cable and GPU. Some monitors also have a “gaming” mode that must be enabled in the on-screen menu.

Is 144 Hz the same as 144 fps?

No. Refresh rate (Hz) is what the monitor can display; frame rate (fps) is what the GPU produces. To get the full benefit, you want both to be high. A 144 Hz monitor with a game running at 60 fps will still look like 60 fps. A 60 Hz monitor with a game running at 144 fps will only show 60 frames per second.

Can I overclock my monitor to 144 Hz if it’s only 60 Hz?

Sometimes. Many monitors can be overclocked to 75 Hz or 100 Hz, but reaching 144 Hz from a 60 Hz panel is rare and usually not possible. Overclocking can cause artifacts or damage if done incorrectly. It is safer to buy a monitor that natively supports 144 Hz.

Related

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.