Sentinel Dev Diary: 5 Checks for Spec-Code Alignment
- Average speed
- km/h
- Result
- Finish time
- 50 min
- You entered
- Distance
- 10 km
- You entered
This article answers the question directly: the Sentinel development diary outlines five specific checks for keeping specifications, code, and documentation aligned. These checks are a practical review routine that catches drift before it becomes a costly rework. Below, we break down each check, explain why they matter, and show how to apply them to your own projects.
Formula
The core relationship in the calculator is simple: pace (minutes per kilometer) equals total time in minutes divided by distance in kilometers. Speed (kilometers per hour) is distance divided by time in hours. The formulas are:
- Pace = t ÷ d, where t is finish time in minutes and d is distance in km. The result is in min/km.
- Speed = d ÷ (t ÷ 60), where t is in minutes, so t ÷ 60 converts to hours. The result is in km/h.
Both outputs are derived directly from the two inputs. No other constants or factors are involved.
Worked Example
Using the default values from the calculator above (finish time = 50 minutes, distance = 10 km):
- Calculate pace: 50 ÷ 10 = 5.0 min/km.
- Calculate speed: First convert time to hours: 50 ÷ 60 = 0.8333 hours. Then divide distance by that: 10 ÷ 0.8333 = 12.0 km/h.
The calculator returns pace = 5.00 min/km and speed = 12.00 km/h, matching the manual calculation.
Background: Why Alignment Drifts
In software development, specifications (specs), code, and documentation often start in sync but gradually diverge. A spec says a field is required, but the code makes it optional. The documentation describes an old API endpoint that no longer exists. This drift happens for many reasons: tight deadlines, personnel changes, or simply because documentation is seen as a lower priority than code. The Sentinel dev diary addressed this by proposing a set of checks to be run at regular intervals, treating alignment as a first-class engineering task rather than an afterthought.
The Five Checks in Detail
The five checks from the diary are not a one-time audit but a recurring process. Each check targets a different type of misalignment:
- Check 1: Spec vs. Code Behavior. For each user story or requirement in the spec, find the corresponding code path and verify the behavior matches. For example, if the spec says “the form rejects empty email addresses,” test that the validation rule exists and triggers correctly.
- Check 2: Code vs. Documentation. Review the public API documentation, user guides, or README files. Pick a random sample of documented features and confirm they exist in the code and work as described. This catches outdated examples and removed parameters.
- Check 3: Documentation vs. Spec. Compare the documentation against the spec to ensure nothing promised in the spec is missing from the docs. This is especially important for features that are implemented but never documented.
- Check 4: Data Flow Integrity. Trace a piece of data from input to storage and back. Verify that field names, types, and units match across layers. A common issue is a unit mismatch (e.g., meters vs. kilometers) that the spec defines but the code ignores.
- Check 5: Edge Cases and Error Handling. Check that the spec’s defined edge cases (e.g., zero values, negative numbers, large inputs) are handled consistently in code and documented appropriately. If the spec says “distance must be positive,” the code should enforce it and the docs should mention it.
How to Implement These Checks
These checks work best when automated where possible, but manual review is still necessary. Here’s a practical approach:
- Use a traceability matrix. Create a table linking each spec requirement to its code module and documentation section. This makes it easy to spot gaps.
- Automate what you can. Write unit tests that assert against the spec’s acceptance criteria. Use documentation generators that pull comments from code, so the docs stay close to the source.
- Schedule regular reviews. Set a recurring calendar invite (e.g., every sprint or every release) to run through the five checks. Treat them as a checklist, not a brainstorming session.
- Involve multiple roles. Have a developer, a technical writer, and a product owner or analyst participate. Each sees the product from a different angle.
Common Mistakes and Misconceptions
One common mistake is treating documentation as a one-time deliverable. In reality, docs need continuous updates just like code. Another misconception is that alignment checks are only necessary for large projects. Even small projects benefit because the cost of fixing a mismatch grows over time.
Another frequent error is confusing “spec” with “design document.” A spec is a formal description of behavior, while a design doc explains how to implement it. The checks focus on the spec, not the design, because the spec is the contract with the user.
Finally, some teams skip the edge-case check because they think it’s trivial. But edge cases are exactly where bugs hide. For example, a calculator that divides by zero will crash; the spec might say “handle division by zero gracefully,” but the code might not. That’s a real misalignment.
How to Choose Which Checks to Run
You don’t have to run all five checks every time. Prioritize based on your current risk:
- If you’ve just shipped a new feature, run Check 1 (spec vs. code) and Check 3 (docs vs. spec).
- If you’ve refactored code, run Check 2 (code vs. docs) to catch broken examples.
- If you’ve changed data models, run Check 4 (data flow).
- If you’re preparing a release, run all five as a final gate.
The point is to make the checks a habit, not a one-time event. Over time, you’ll find that drift becomes less frequent because the team internalizes the discipline.
Comparison with Other Alignment Methods
There are other approaches to keeping specs, code, and docs in sync. Some teams use “living documentation” where the docs are generated from code annotations (e.g., Swagger for APIs). Others use behavior-driven development (BDD) where the spec is written in a format that can be executed as tests (e.g., Gherkin). The Sentinel checks are complementary to these: they are a review process, not a tool. While BDD can prevent drift at the code level, it doesn’t ensure that user-facing documentation matches. The five checks cover that gap.
Costs and Benefits
The main cost of these checks is time. A thorough review can take a few hours per sprint, depending on project size. But the benefit is reduced rework. Fixing a misaligned spec after the code is written can cost many times more than catching it early. Documentation that is wrong can lead to support tickets and user frustration. In regulated industries, misalignment can have compliance implications. The checks are a low-cost insurance policy.
Safety and Accuracy Considerations
While these checks are about software quality, they have a safety angle. If the software controls physical equipment or processes, a spec-code mismatch could lead to dangerous behavior. For example, a medical device that administers a drug dose must have its spec, code, and documentation perfectly aligned. The five checks help ensure that the implemented behavior matches the intended, documented behavior, reducing the risk of accidents.
Frequently Asked Questions
What is a spec in software development?
A spec (short for specification) is a formal description of what a software system should do. It defines features, inputs, outputs, and constraints. It serves as a contract between stakeholders and developers.
How often should I run these checks?
Ideally, at least once per sprint or per release. For high-risk projects, you might run them more frequently, such as after every significant commit. The key is consistency.
Can these checks be fully automated?
Partially. You can automate tests that verify code against the spec (Check 1) and use doc generators to keep docs close to code (Check 2). But a human review is still needed to catch subtle mismatches, especially in documentation tone and completeness.
What if my project has no formal spec?
Even if you don’t have a formal document, you can treat the README or a set of acceptance criteria as a de facto spec. The checks still apply.
How do I handle legacy code with no docs?
Start by documenting the current behavior as the “spec” (reverse engineering). Then run the checks to find inconsistencies. It’s a gradual process, but it’s better than leaving it unaligned.
Do these checks apply to non-software projects?
Yes, the principles apply to any project where there is a specification, an implementation, and user documentation. For example, hardware projects with schematics and user manuals can benefit from similar reviews.
Related
Formula used
in t | Finish time | min | 50 | 0 in d | Distance | km | 10 | 0 out pace | Average pace | min/km | t / d | 2 out speed | Average speed | km/h | d / (t / 60) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.