Remove All Data on Synology NAS: Full Wipe Guide
Removing all data on a Synology NAS means permanently erasing every file, setting, and partition from its drives, returning the unit to a factory-fresh state. This guide covers the two safe methods—resetting via DSM and physically wiping drives—plus what to do before you start and how to avoid common mistakes.
Why You Might Need a Full Wipe
People wipe a Synology NAS for several reasons. You may be selling or handing the unit to someone else, and you want to ensure no personal files, photos, or documents are recoverable. You might be troubleshooting a corrupted DSM installation that won’t boot or update properly. Or you could be starting over with a different RAID configuration—for example, switching from SHR to RAID 1—which requires deleting the existing storage pool. In all cases, the goal is the same: erase all data and restore the NAS to its out-of-box state.
Before You Wipe: Back Up Critical Files
A full wipe is irreversible. Once you delete the storage pool or reset DSM, the data is gone unless you have a backup. Before doing anything, copy important files to an external drive, another NAS, or a cloud service. Use Hyper Backup, rsync, or simply drag-and-drop over the network. Check that the backup is complete and readable before proceeding. Also note any network settings, user accounts, and installed packages you want to recreate later—they will be lost.
Method 1: Reset DSM to Factory Defaults
This method erases system settings and returns DSM to its default configuration, but it does not delete the data on the drives unless you choose the option to do so. To perform a full wipe including data, use the “Reset” button on the back of the NAS while it is powered on. Hold it until you hear a beep, then release. This triggers a reset that removes all settings and reinstalls DSM. However, the data volumes remain intact. To delete the data as well, you must go to Storage Manager and remove the storage pool and volume before resetting, or use the “Reset” option in DSM’s Control Panel that offers “Erase all data” (if available on your model). The safest way to ensure no data remains is to combine a reset with a manual drive wipe.
Method 2: Physically Wipe the Drives
If you want to guarantee that no data can be recovered—for privacy or before selling the drives—physically wipe each drive. Remove the drives from the NAS and connect them to a computer. Then use disk-wiping software to overwrite the entire drive with zeros or random data. On Windows, you can use Diskpart’s clean all command; on macOS, use Disk Utility’s Erase with Security Options; on Linux, use dd if=/dev/zero of=/dev/sdX. This process takes several hours per terabyte, but it makes data recovery practically impossible. After wiping, reinstall the drives in the NAS and run a fresh DSM installation.
Step-by-Step: Full Wipe via DSM Interface
If your NAS is still functional, the most straightforward way to remove all data is through DSM’s Storage Manager. Here’s how:
- Log into DSM as an administrator.
- Open Storage Manager.
- Go to Storage Pool and select the pool you want to delete.
- Click Remove and confirm that you want to delete the pool. This erases all volumes and data on that pool.
- If you have multiple pools, repeat for each.
- After removing all pools, go to Control Panel > Update & Restore > Reset and choose Erase all data (if available) or just Reset to clear settings.
- If the reset option doesn’t erase data, manually wipe the drives as described in Method 2.
This process ensures that both the data and the system settings are gone.
Common Mistakes and Pitfalls
One common mistake is assuming that a DSM reset deletes your files. It does not—it only resets system configurations. Another is forgetting to back up before wiping, leading to permanent data loss. Also, if you have a RAID array, removing one drive from the array does not erase data on the others; you must wipe all drives individually. Finally, be aware that some Synology models have a hidden system partition that may survive a simple reset; a full drive wipe is the only way to remove it.
Frequently Asked Questions
Q: Will a factory reset on Synology NAS delete my data?
A: No. A standard factory reset (via the reset button or Control Panel) only restores system settings to default. Your files and volumes remain intact. To delete data, you must remove the storage pool or wipe the drives.
Q: How do I completely erase a Synology NAS before selling it?
A: Back up important files, then remove all storage pools in Storage Manager. Next, physically wipe each drive using disk-wiping software on a computer, or use the “Erase all data” option in DSM if your model supports it. Finally, reinstall DSM fresh.
Q: Can I recover data after wiping a Synology NAS?
A: If you only did a quick format or deleted the pool, data recovery software might recover some files. If you overwrite the drives with zeros or random data, recovery is virtually impossible. For maximum security, use a tool that performs multiple passes.
Q: Does removing a storage pool delete all data on the drives?
A: Yes, removing a storage pool deletes the volumes and all data on those drives. However, the drives still contain remnants of the data that can be recovered with special software. A full wipe is needed to erase those remnants.
Q: What is the difference between a quick wipe and a full wipe?
A: A quick wipe (like deleting a pool) only removes the file system pointers, making data invisible but still recoverable. A full wipe overwrites the entire drive with new data, making recovery extremely difficult. For sensitive data, always do a full wipe.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.