ThisCalculator

Everyday

External Microphone Buying Questions to Ask

Updated · Standard formula, shown below

Average pace 10,000.00 min/km
Average speed
0.01 km/h
Result
Recording time
10 min
You entered
Distance
1 m
You entered

Before you buy an external microphone, you need to answer a few key questions about your recording device, your environment, and your intended use. The most important question is whether the microphone’s connector and power requirements are compatible with your camera, phone, or computer, because a great mic that doesn’t physically connect or receive power is useless. This article walks you through the essential questions to ask, explains the technical differences between microphone types, and helps you avoid common buying mistakes.

What Is an External Microphone and Why Do You Need One?

An external microphone is any microphone that is not built into your recording device. Built-in microphones on cameras, phones, and laptops are designed for convenience, not audio quality. They are usually small, omnidirectional, and located close to the device’s body, which means they pick up room echo, handling noise, and the sound of the device’s own fans or autofocus motors. An external mic gives you better sound because it can be placed closer to the sound source, pointed at the speaker, and designed with a directional pickup pattern that rejects unwanted noise.

External mics come in several form factors: shotgun mics (long and narrow, mounted on a camera or boom), lavalier mics (small clip-on mics), USB desktop mics (for podcasting and streaming), and handheld dynamic mics (for interviews and live sound). Each type solves a different problem, and the right one depends on what you are recording and where.

What Are the Main Types of External Microphones?

Understanding the three main transducer types helps you match the mic to your source and environment.

  • Dynamic microphones use a moving coil and magnet. They are rugged, handle high sound pressure levels (loud sources) well, and reject background noise. They are ideal for live vocals, guitar amps, and loud podcasters. They do not need external power (no phantom power required).
  • Condenser microphones use a charged diaphragm and require power (either from a battery or from 48V phantom power from an audio interface or mixer). They are more sensitive and capture more detail, making them great for studio vocals, acoustic instruments, and quiet sources. They also pick up more room noise and are more fragile.
  • Ribbon microphones are a type of dynamic mic that uses a thin metal ribbon. They have a warm, smooth sound and a figure-8 pickup pattern. They are delicate and often require a lot of gain, so they are less common for beginners.

For video work, the most common external mics are shotguns (condenser) and lavaliers (usually condenser or electret). For podcasting, dynamic USB mics are popular because they reject room echo and connect directly to a computer.

What Connector Does Your Device Use?

The connector determines whether the mic will work with your device at all. The three main connectors are:

  • 3.5mm TRS/TRRS – The standard analog audio jack. TRS (tip-ring-sleeve) carries a balanced mono signal for cameras and audio recorders. TRRS (tip-ring-ring-sleeve) carries stereo plus a microphone signal and is used by smartphones and some laptops. If you plug a TRS mic into a TRRS device, you may get no sound or only one channel.
  • USB – Digital connection for computers, tablets, and some phones (with an adapter). USB mics are plug-and-play and contain their own analog-to-digital converter, so they bypass the device’s built-in audio chip.
  • XLR – Professional three-pin connector used with audio interfaces, mixers, and field recorders. XLR mics require a separate audio interface to connect to a computer, and they need phantom power if they are condensers.

If you are buying a mic for a smartphone, you need a TRRS connector or a USB-C/Lightning adapter. For a DSLR or mirrorless camera, you need a 3.5mm TRS input (some cameras have TRRS, but check the manual). For a computer, USB is easiest, but XLR with an interface gives you more control and upgradeability.

What Pickup Pattern Do You Need?

The pickup pattern (polar pattern) describes the directions from which the mic captures sound. This is a critical question because it directly affects background noise.

  • Omnidirectional picks up sound equally from all directions. Good for recording a group around a table, but poor for noisy environments.
  • Cardioid picks up sound primarily from the front and rejects sound from the rear. This is the most common pattern for podcasting, vocals, and home recording.
  • Supercardioid/Hypercardioid are narrower than cardioid, picking up more from the front and a small lobe from the rear. Shotgun mics use these to isolate a subject in noisy environments.
  • Bidirectional (figure-8) picks up from front and back, rejecting the sides. Used for interviews (two people facing each other) or for mid-side stereo recording.

For most video work, a shotgun mic with a supercardioid pattern is a good choice because it rejects room echo and focuses on the subject. For podcasting, a cardioid dynamic mic is often better because it rejects off-axis noise and doesn’t pick up as much room sound as a condenser.

What Are the Power Requirements?

Condenser mics need power to charge the diaphragm and the internal preamp. The two common power sources are:

  • Phantom power (48V) – Sent through an XLR cable from an audio interface, mixer, or field recorder. If your mic is a condenser and you don’t have phantom power, it will be silent or very quiet.
  • Battery or USB power – Some mics (like many shotgun mics) take a small battery (e.g., AA or LR44) or can be powered by the device’s USB port. This is convenient for cameras that don’t provide phantom power.

Dynamic mics do not need power, which is why they are often recommended for beginners. However, some dynamic mics (like the Shure SM7B) have a very low output level and may require a preamp or a cloud lifter to get enough gain.

How to Choose Based on Your Recording Environment

Your room’s acoustics matter more than the mic’s price. A $200 condenser mic in a reverberant room will sound worse than a $50 dynamic mic close to your mouth.

  • Untreated room with hard floors/walls – Choose a dynamic mic (cardioid) and place it close to your mouth. Avoid large-diaphragm condensers unless you have acoustic treatment.
  • Outdoor or noisy location – Use a shotgun mic with a windscreen or a lavalier placed under clothing. A lavalier is less affected by wind than a shotgun.
  • Recording a single voice – A cardioid dynamic or a small-diaphragm condenser at 6–12 inches away works well.
  • Recording two people – Use two lavaliers or a bidirectional mic. A single cardioid mic will not capture both equally.

What Accessories Do You Need?

The mic itself is only part of the setup. Common accessories that affect sound quality:

  • Windscreen or pop filter – Reduces plosives (p, b, t) and wind noise. A foam windscreen on the mic or a pop filter between you and the mic is essential for close-up vocals.
  • Shock mount – Isolates the mic from vibrations and handling noise. Important for shotgun mics mounted on a camera.
  • Boom pole or stand – Allows you to position the mic close to the subject without being in the frame.
  • Cables and adapters – A good quality XLR or 3.5mm cable, plus adapters for your specific device (e.g., TRS to TRRS, USB-C to Lightning).
  • Audio interface – Required for XLR mics to connect to a computer. It provides phantom power and analog-to-digital conversion.

Frequently Asked Questions

Can I use a USB microphone with a camera?

Most cameras do not have USB audio input for microphones. USB mics are designed for computers and mobile devices. To use a USB mic with a camera, you would need a separate audio recorder and then sync the audio in post-production, which is cumbersome. For direct camera recording, use a 3.5mm or XLR mic.

Do I need phantom power for a condenser microphone?

Yes, most condenser mics require 48V phantom power to operate. If your audio interface or mixer does not have phantom power, you cannot use a condenser mic unless it has a battery option. Dynamic mics do not need phantom power.

What is the difference between a shotgun and a lavalier mic?

A shotgun mic is a directional mic that you mount on a camera or boom; it picks up sound from a narrow area in front of it. A lavalier is a tiny clip-on mic that you attach to the subject’s clothing; it is omnidirectional and picks up the voice close to the chest. Shotguns are better for recording from a distance, lavaliers are better for hands-free and hidden recording.

Why does my external mic sound quiet or have no sound?

Common causes: the connector is not fully inserted, the device’s input is set to the wrong source (e.g., internal mic), phantom power is not enabled for a condenser, or the mic’s volume is too low in the device settings. Also check if the cable is damaged or if the mic has a mute switch.

Can I use a microphone designed for a computer on my phone?

It depends on the connector. A USB mic will not work with a phone unless the phone supports USB audio and you have an OTG adapter. A 3.5mm TRRS mic will work with a phone that has a headphone jack. For iPhones without a jack, you need a Lightning-to-3.5mm adapter that supports mic input.

Is a more expensive microphone always better?

Not necessarily. The mic’s performance depends on your environment and how you use it. A $50 dynamic mic used close-up in a quiet room can sound better than a $300 condenser in a reverberant room. Spend money on acoustic treatment and proper placement before upgrading the mic.

Related

Formula used
in t | Recording time | min | 10 | 0
in d | Distance | m | 1 | 0
out pace | Average pace | min/km | t / (d / 1000) | 2
out speed | Average speed | km/h | (d / 1000) / (t / 60) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.