Printer Not Printing? Fix It in 7 Steps
If your printer is not printing, the fix is usually a simple one: check the connection, clear the print queue, and verify the correct printer is selected. This article walks through the most common causes and solutions, from paper jams to driver issues, so you can get back to work quickly.
Quick Checks Before You Dive In
Before you start troubleshooting, run through these quick checks. They solve a surprising number of problems and take less than a minute.
- Is the printer powered on? Look for a blinking or solid power light. If it’s off, press the power button and wait for it to finish starting up.
- Is there paper in the tray? Fan the paper stack to prevent sticking, then reload it. Make sure the paper guides are snug against the edges but not too tight.
- Are there any error messages on the printer’s display? A flashing light or message often indicates a specific issue like a paper jam or an empty ink cartridge.
- Is the printer connected to your computer or network? Check the USB cable or Wi-Fi connection. For wireless printers, confirm they are on the same network as your device.
Check the Print Queue
A stuck print job is one of the most common reasons a printer stops working. When a job gets stuck, it can block all other jobs behind it. Here’s how to clear it on Windows and macOS.
On Windows:
- Open Settings > Devices > Printers & scanners.
- Select your printer and click Open print queue.
- In the queue window, click Printer > Cancel all documents. If that doesn’t work, try restarting the Print Spooler service (see below).
On macOS:
- Go to System Settings > Printers & Scanners.
- Select your printer and click Print Queue.
- Click the X next to the stuck job, or click Resume if the queue is paused.
If the queue won’t clear on Windows, the Print Spooler service might be stuck. Press Windows + R, type services.msc, and press Enter. Find Print Spooler, right-click it, and select Restart. This forces the queue to reset.
Verify the Correct Printer Is Selected
If you have multiple printers installed (including virtual ones like “Microsoft Print to PDF”), your document might be going to the wrong one. In the print dialog (Ctrl+P on Windows, Cmd+P on Mac), check the printer name at the top. Make sure it’s your physical printer, not a fax or PDF option.
Also, check if your printer is set as the default. On Windows, go to Settings > Devices > Printers & scanners, select your printer, and click Manage > Set as default. On macOS, go to System Settings > Printers & Scanners, right-click your printer, and select Set as default printer.
Check Ink and Toner Levels
Low or empty ink cartridges are a frequent culprit. Most printers will warn you, but sometimes the warning is subtle or the printer just stops. Check the ink or toner levels through your printer’s software or the printer’s display panel.
If a cartridge is empty, replace it. If it’s low but not empty, you can try removing it and gently shaking it (for ink cartridges) to redistribute the ink, but this is a temporary fix. For toner cartridges, you can sometimes remove and shake them to extend life, but be careful—toner powder is messy.
Also, check if the protective tape or plastic film was removed from new cartridges. If left on, it can block the printhead and cause blank pages.
Clear Paper Jams and Check for Obstructions
Paper jams are inevitable. If the printer reports a jam, or you hear a grinding noise, follow these steps:
- Turn off the printer and unplug it.
- Open the front, back, and any access panels to locate the jammed paper.
- Gently pull the paper out in the direction it would normally feed. Do not yank it—you might tear it and leave pieces inside.
- Check for small bits of torn paper, especially in rollers and the output tray.
- Look for any other obstructions like paper clips, staples, or foreign objects.
- Close all panels, plug the printer back in, and turn it on.
If the jam is not visible, consult your printer’s manual for the exact location of the jam-clearing path.
Update or Reinstall Printer Drivers
Outdated or corrupted drivers can cause printing to fail. Drivers are the software that lets your computer talk to the printer. Here’s how to update them:
Windows:
- Open Device Manager (right-click the Start button and select it).
- Expand Print queues and find your printer.
- Right-click it and select Update driver > Search automatically.
macOS:
- Go to System Settings > Printers & Scanners.
- Select your printer and click the minus button to remove it.
- Click the plus button, re-add your printer, and macOS will automatically find the best driver.
If updating doesn’t work, try uninstalling the printer completely and reinstalling it using the manufacturer’s software. This often clears corrupted settings.
Check Network and Wireless Connections
For wireless printers, a weak or dropped Wi-Fi signal is a common issue. Ensure your printer is connected to the same network as your computer. You can usually print a network configuration page from the printer’s menu to see its IP address and network status.
If the printer is connected but not responding, try these steps:
- Restart your router and printer.
- Move the printer closer to the router to improve signal strength.
- Check if your router’s firewall is blocking the printer (rare, but possible).
- Use a USB cable temporarily to see if the printer works—this isolates the issue to the network.
Frequently Asked Questions
Why is my printer printing blank pages?
Blank pages usually mean the ink or toner is not reaching the paper. This can be due to clogged printheads, empty cartridges, or a misaligned printhead. Most printers have a built-in cleaning cycle in the software—try running it. If that fails, replace the cartridges.
Why does my printer say “offline”?
This usually means the computer can’t communicate with the printer. Check the USB cable or Wi-Fi connection. On Windows, go to Settings > Devices > Printers & scanners, select your printer, and click Use offline to uncheck it. On macOS, try removing and re-adding the printer.
Why is my printer printing slowly?
Slow printing can be caused by high-quality print settings (like photo mode), a slow connection (Wi-Fi vs. USB), or a large file. Try lowering the print quality in the print dialog, or connect via USB if possible. Also, check if the printer is in a power-saving mode.
How do I reset my printer?
Most printers have a reset option in the menu (often under “Settings” or “Maintenance”). If not, you can do a power reset: turn off the printer, unplug it for 30 seconds, then plug it back in and turn it on. This clears temporary errors.
Why does my printer keep jamming?
Recurring jams often point to worn rollers, incorrect paper type, or paper that is too thick or too thin. Try using fresh, standard 20-lb paper. Clean the rollers with a lint-free cloth slightly dampened with water. If the problem persists, the rollers may need replacement.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.