ThisCalculator

Everyday

Nvidia’s Budget GTX: Which Card Should You Buy?

Updated · Standard formula, shown below

Value score (perf/price*100) 3.50
Your budget (USD)
200 $
You entered
Desired performance (1-10)
7
You entered

Nvidia’s budget GTX lineup—the GTX 16-series—offers the cheapest way to get into modern gaming, with the GTX 1650 and GTX 1660 Super being the most popular picks. This article explains what these cards offer, how they compare, and which one fits your needs and budget.

Formula

The calculator estimates a simple “value score” by dividing your desired performance rating (1–10) by your budget in dollars, then multiplying by 100. This gives a rough idea of how much performance you can expect per dollar, but it’s not a benchmark—it’s a personal preference tool.

Value Score = (Performance Rating / Budget) × 100

  • Performance Rating – a number from 1 (low) to 10 (high) representing how much gaming performance you want.
  • Budget – the amount you plan to spend in US dollars.

Worked Example

Suppose your budget is $200 and you want a performance level of 7 out of 10. Using the formula:

  1. Divide performance by budget: 7 ÷ 200 = 0.035
  2. Multiply by 100: 0.035 × 100 = 3.5

Your value score is 3.5. This means you’re getting a moderate amount of performance per dollar—not great, not bad. If you increase your budget to $300, the score drops to 2.33, meaning you’re paying more for each unit of performance. The calculator helps you see that higher budgets don’t always mean better value.

Understanding the GTX 16-Series

Nvidia launched the GTX 16-series in 2019 as a budget-friendly alternative to the RTX cards. The key difference is that GTX cards lack ray tracing and DLSS (Deep Learning Super Sampling) features found on RTX cards. Instead, they focus on raw rasterization performance, making them cheaper and more power-efficient.

The lineup includes the GTX 1650, GTX 1650 Super, GTX 1660, and GTX 1660 Super. The GTX 1650 is the entry-level option, while the GTX 1660 Super is the top performer in this series. These cards are still sold new and used, though they’ve been largely replaced by the RTX 3050 and RTX 4060 in newer builds.

How to Choose the Right GTX Card

Choosing the right GTX card depends on your resolution, target framerate, and budget. Here’s a simple guide:

  • GTX 1650 – Best for 1080p at low-to-medium settings in esports titles like Fortnite, Valorant, or CS2. It’s also a good choice for budget HTPCs (home theater PCs) because of its low power draw.
  • GTX 1650 Super – A solid step up, handling 1080p at medium settings in most AAA games. It’s about 20% faster than the base 1650.
  • GTX 1660 – Slightly faster than the 1650 Super, but often priced similarly, so it’s usually a better deal if found at the same price.
  • GTX 1660 Super – The best value in the series, offering close to GTX 1660 Ti performance (which was discontinued) at a lower price. It can handle 1080p at high settings in most games and even 1440p in lighter titles.

If you’re building a new PC today, you might also consider the RTX 3050 or RTX 4060, but they cost more. The GTX 16-series remains a good option for ultra-budget builds or as a temporary card.

Common Problems and Solutions

GTX 16-series cards are generally reliable, but users report a few issues:

  • Driver issues – Sometimes a new driver causes crashes or performance drops. Solution: use Display Driver Uninstaller (DDU) to cleanly remove old drivers, then install the latest from Nvidia’s website.
  • Fan noise – Some models have aggressive fan curves. You can adjust fan speed with MSI Afterburner or EVGA Precision X1.
  • VRAM limitations – The GTX 1650 has only 4GB of VRAM, which can cause stuttering in modern games. Solution: lower texture quality or resolution.
  • Power supply issues – If your PSU is weak, the card may not get enough power. Check the recommended wattage (usually 300W–350W for these cards) and ensure your PSU has the required 6-pin or 8-pin connector.

Comparison with RTX Budget Cards

If you’re deciding between a GTX 16-series and an RTX 3050 or RTX 4060, consider these differences:

  • Ray tracing – RTX cards can enable ray tracing, but on budget cards, it’s often too slow to use in real-time. GTX cards don’t support it at all.
  • DLSS – RTX cards support DLSS, which boosts framerates by rendering at a lower resolution and upscaling. This is a major advantage in supported games.
  • Price – GTX cards are cheaper, especially used. An RTX 3050 is about 30–50% more expensive than a GTX 1660 Super but offers similar raw performance plus DLSS.
  • Future-proofing – RTX cards are more future-proof due to DLSS and better driver support for newer features.

For pure budget, GTX wins. For features, RTX wins.

Cost and Where to Buy

New GTX 16-series cards are mostly out of production, so you’ll likely buy used. Prices vary widely:

  • GTX 1650: $80–$120 used
  • GTX 1650 Super: $100–$140 used
  • GTX 1660 Super: $120–$180 used

When buying used, check for signs of heavy mining (which can degrade performance) and ask for a benchmark screenshot. Avoid cards with damaged fans or missing brackets.

Safety and Power Requirements

These cards are low-power, but you still need to ensure your system can handle them:

  • GTX 1650 (non-Super) draws only 75W and doesn’t need a 6-pin power connector—it runs entirely off the PCIe slot.
  • GTX 1650 Super draws 100W and requires a 6-pin connector.
  • GTX 1660 Super draws 125W and requires an 8-pin connector.

Always check your power supply’s wattage and connectors. A 450W PSU from a reputable brand is enough for any of these cards. Also, ensure your case has adequate airflow—these cards run cool, but a cramped case can still cause overheating.

Frequently Asked Questions

Is the GTX 1650 good for gaming in 2025?

It’s okay for esports and older games at 1080p, but it struggles with modern AAA titles. You’ll need to lower settings to medium or low and may have to accept 30–60 fps depending on the game.

How much VRAM do I need?

For 1080p gaming, 4GB is the minimum, but 6GB is recommended for modern games. The GTX 1660 Super’s 6GB is a good balance, while the 1650’s 4GB can be limiting.

Can I use a GTX 16-series card for video editing?

Yes, but it’s not ideal. These cards lack hardware encoding features like NVENC (which is present on GTX 16-series, actually—all GTX 16 cards have NVENC). So they can handle video editing, but rendering times will be slower than with an RTX card.

Should I buy a GTX 1660 Super or an RTX 3050?

If you find a 1660 Super for under $150, it’s a great deal. But if the price difference is small, the RTX 3050 offers DLSS and better future support. For pure rasterization, the 1660 Super is slightly faster.

Are these cards good for mining?

They’re not efficient for mining Ethereum (which is now proof-of-stake), so they’re not sought after by miners. That means used cards are less likely to have been mined on, but always ask.

Do I need to upgrade my power supply?

If you have a 400W or higher PSU from a known brand, you’re fine. If it’s a generic 300W unit, consider upgrading to a 450W 80+ Bronze unit for safety.

Related

Formula used
in price | Your budget (USD) | $ | 200 | 0
in perf | Desired performance (1-10) | - | 7 | 0
out value | Value score (perf/price*100) | - | perf / price * 100 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.