No Connected Camera Mac? Fix It in 5 Steps
If your Mac says “No Connected Camera” when you open FaceTime, Photo Booth, or Zoom, the system can’t see your built-in or external webcam. This guide explains the common causes and walks you through the fixes, from simple permission checks to resetting the camera hardware.
Why Does This Happen?
macOS uses a dedicated camera service that apps access through a system framework. When that service fails, or when another app is holding the camera, every app shows the same “No Connected Camera” error. The most frequent triggers are:
- Another app is using the camera — only one app can access it at a time.
- Privacy permissions are off — macOS blocks camera access for apps you haven’t allowed.
- The camera process crashed — a temporary glitch in the system service.
- Outdated macOS or drivers — especially after a major update.
- Hardware connection issue — for external webcams, a loose cable or dead port.
Step 1: Check If Another App Is Using the Camera
Close all apps that might be using the camera: FaceTime, Zoom, Teams, Skype, OBS, or any video editor. Then try opening Photo Booth — it’s the simplest test. If Photo Booth works, the problem is with the specific app you were using. If it doesn’t, move to the next step.
Step 2: Grant Camera Permissions
macOS asks for permission the first time an app tries to access the camera. If you clicked “Don’t Allow” by accident, or if a system update reset permissions, the app will show the error. Here’s how to fix it:
- Open System Settings (or System Preferences on older macOS).
- Go to Privacy & Security → Camera.
- Find the app that’s giving you trouble (e.g., FaceTime, Zoom, Safari).
- Toggle the switch to On. If it’s already on, toggle it off and on again.
- Quit the app completely (Cmd+Q) and reopen it.
If the app isn’t listed, it hasn’t requested access yet — just open it and the prompt should appear. If it doesn’t, restart your Mac and try again.
Step 3: Reset the Camera Service
Sometimes the camera process gets stuck. Restarting it is safe and often resolves the issue. Here’s how:
- Open Activity Monitor (in /Applications/Utilities).
- Search for Camera or VDC (the virtual camera driver).
- Select any process named Camera, VDC, or CoreMediaIO and click the X button to force quit.
- Wait a few seconds, then reopen your camera app.
If you don’t see those processes, restart your Mac — that will also reset the camera service.
Step 4: Check External Webcam Connections
If you’re using an external webcam, the issue is often physical. Try these in order:
- Unplug the webcam and plug it into a different USB port (preferably directly on the Mac, not a hub).
- If using a USB-C hub, try without the hub.
- Check the cable for damage — try a different cable if possible.
- On some Macs, the camera is disabled when the lid is closed or when using certain display adapters. Open the lid and disconnect any external displays.
- If the webcam has a physical privacy shutter, make sure it’s open.
Step 5: Update macOS and Reset the SMC/NVRAM
If none of the above work, the camera driver may be outdated. Go to System Settings → General → Software Update and install any available updates. After updating, restart your Mac.
For built-in cameras on Intel Macs, resetting the NVRAM (non-volatile RAM) can clear hardware glitches. Shut down your Mac, then turn it on and immediately press and hold Option + Command + P + R for about 20 seconds. On Apple Silicon Macs, simply restarting is usually enough — the NVRAM reset is automatic.
Frequently Asked Questions
Why does my Mac say “No Connected Camera” after a macOS update?
Updates can change privacy permissions or reset system services. First, check the Camera privacy list in System Settings and ensure your apps are still allowed. If they are, restart your Mac — this often reinitializes the camera service. If the problem persists, try resetting the SMC (on Intel Macs) or reinstalling the update.
Can I use my iPhone as a webcam when the Mac camera fails?
Yes, if you have an iPhone with iOS 13 or later and a Mac with macOS Catalina or later, you can use Continuity Camera. Open the app you want (e.g., FaceTime), go to the Video menu, and select your iPhone. This works even if the built-in camera is broken, but your iPhone must be nearby with Wi-Fi and Bluetooth enabled.
Why does the camera work in some apps but not others?
This almost always means a privacy permission issue. The app that fails hasn’t been granted camera access. Go to System Settings → Privacy & Security → Camera and enable that specific app. If it’s already enabled, toggle it off and on, then quit and reopen the app.
How do I know if my camera is physically dead?
If you’ve tried all steps and the camera still doesn’t work in any app (including Photo Booth), and restarting your Mac doesn’t help, it’s likely a hardware failure. For built-in cameras, you’ll need service. For external webcams, try connecting it to another computer — if it works there, the problem is your Mac’s software or port.
Does resetting the Mac’s SMC fix camera issues?
Sometimes, yes. The SMC (System Management Controller) manages power and hardware, including the camera on Intel Macs. Resetting it can clear a stuck camera. On Apple Silicon Macs, there’s no SMC reset — just restart. If you have an Intel Mac, shut down, unplug the power cord, hold the power button for 10 seconds, then reconnect and start normally.
If you’ve gone through all these steps and the camera still isn’t recognized, the issue is almost certainly hardware-related. For built-in cameras, contact Apple Support or visit an authorized service provider. For external webcams, test on another computer — if it works there, the problem is your Mac’s software or port, not the camera itself.
Related
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.