New Servers Added? How to Check & What It Means

Yes, new servers have been added to many major online games and services, but whether one is available to you depends on the specific platform, region, and game you play. This article explains how to check for newly added servers, what adding a server actually involves, and how to choose the right one for your needs.

Formula

The calculator above works out your average pace and speed from a finish time and distance. The formulas are:

• Pace (min/km) = Finish time (minutes) ÷ Distance (km)
• Speed (km/h) = Distance (km) ÷ (Finish time (minutes) ÷ 60)

Where Finish time is the total minutes taken, and Distance is the length of the run or ride in kilometres. Pace tells you how many minutes each kilometre took; speed tells you how many kilometres you covered in one hour.

Worked Example

Using the default values from the calculator: finish time = 50 minutes, distance = 10 km.

1. Pace = 50 ÷ 10 = 5.00 min/km
2. Speed = 10 ÷ (50 ÷ 60) = 10 ÷ 0.8333 = 12.00 km/h

So a 50-minute, 10 km run gives an average pace of 5:00 per kilometre and an average speed of 12 km/h. The calculator shows the same result rounded to two decimal places.

When to Use This Calculator

Use this tool whenever you finish a timed run, bike ride, swim, or walk and want a quick pace or speed number. It is especially useful for training plans that specify target paces, for comparing efforts across different distances, or for logging workouts in a consistent unit. Runners often think in min/km, while cyclists and drivers think in km/h – this calculator gives both at once.

How to Read the Results

The first output, average pace, is the headline number. A lower pace means faster – 4:30 min/km is quicker than 6:00 min/km. The second output, average speed, is the same effort expressed as distance per hour. For example, a 5:00 min/km pace equals exactly 12 km/h. If you run on a treadmill that shows speed, you can convert your outdoor pace to the treadmill setting using the speed value.

Note that this is an average over the whole distance. If you run hills or sprints, your instantaneous pace will vary, but the average is a fair summary of the overall effort.

Common Mistakes and Unit Mix-Ups

• Using seconds instead of minutes: Enter the finish time in minutes only. 50:30 should be entered as 50.5, not 50.30.
• Mixing miles and kilometres: If your distance is in miles, convert to km first (1 mile = 1.60934 km) or the pace will be wrong. This calculator assumes km for both distance and pace.
• Rounding too early: Keep at least two decimal places in intermediate steps. Rounding the pace to 5.0 and then computing speed gives 12.0, but rounding to 5.00 gives 12.00 – the difference matters for precise training logs.

Limitations of the Formula

The formula assumes a constant speed and ignores stops, terrain, wind, and elevation. It is a pure mathematical average, not a measure of effort or difficulty. For interval training, heart-rate zones, or power output, this simple pace calculator is not sufficient – you would need additional data. Also, the formula works for any distance unit as long as you are consistent, but the outputs are labelled for kilometres and minutes per kilometre.

Frequently Asked Questions

What is a good running pace for a beginner?

There is no single answer because it depends on age, fitness, and gender. A common starting point for a recreational runner is around 6:00–7:00 min/km (10–8.5 km/h). If you can hold a conversation while running, the pace is appropriate for base training.

How do I convert min/km to min/mile?

Multiply the min/km pace by 1.60934. For example, 5:00 min/km becomes 8:03 per mile. Alternatively, use the speed in km/h and divide by 1.60934 to get mph, then convert to min/mile.

Does this calculator work for walking?

Yes, the math is identical. A typical walking pace is 10–12 min/km (5–6 km/h). Enter your walking time and distance to get your average walking pace.

Why is my average pace slower than my target pace?

Because the average includes every slowdown – hills, traffic lights, water stops. If you want to hit a target average pace, you need to run faster than that pace during the moving portions to compensate for stops.

Can I use this for cycling or swimming?

Yes, for any distance-based sport. For cycling, most people use speed (km/h) rather than pace, but the pace output is still valid. For swimming, the distance is usually in metres, so convert to km first (e.g., 1500 m = 1.5 km).

Related

• Get an ISO File: Safe Download and Setup Guide
• 3D-Printed Smart Home Upgrades for About a Dollar
• Pokémon Evolution Calculator: What It Can and Can’t Tell You

in t | Finish time | min | 50 | 0
in d | Distance | km | 10 | 0
out pace | Average pace | min/km | t / d | 2
out speed | Average speed | km/h | d / (t / 60) | 2