Monitor Refresh Rate Sites: How to Check Your Hz
- Detected refresh rate
- 60 Hz
- You entered
To find your monitor’s actual refresh rate, use a dedicated online test site that displays a moving pattern and asks you to match it to a reference, or check your operating system’s display settings. These sites work by showing a pattern that visibly stutters or tears if your refresh rate is set lower than the panel’s maximum, giving you a quick, practical measurement without installing software.
Formula
The refresh rate (Hz) is the number of times the monitor redraws the full image per second. The formula is simply:
Refresh Rate (Hz) = Number of frames displayed / Time in seconds
For a standard monitor, this is often 60 Hz, meaning 60 frames per second. The calculator above takes the refresh rate you enter (or the one you detected) and converts it to frames per second (fps), which is the same number for a single display. The unit Hz is equivalent to frames per second (fps) when each frame is displayed once.
Worked Example
Using the default value of 60 Hz:
- You enter 60 Hz as the detected refresh rate.
- The formula calculates frames per second as equal to the refresh rate: 60 fps.
- So, a 60 Hz monitor displays 60 frames per second.
This matches the calculator’s output of 60 fps.
What Refresh Rate Sites Actually Do
Refresh rate test sites are simple tools that help you verify the current refresh rate your monitor is operating at. They don’t measure the physical capability of your panel; they measure the signal your graphics card is sending. The site displays a pattern, often a moving block or a scrolling bar, and you adjust a slider or select an option until the pattern appears smooth. The site then tells you the refresh rate that matches the pattern’s motion.
Most sites also show a basic frame skipping test. This typically involves a grid of squares that move in a specific pattern. If your monitor is set to a lower refresh rate than its maximum, or if there’s a cable or driver issue, you’ll see some squares jump or skip.
How to Use a Refresh Rate Test Site
Using these sites is usually straightforward, but the exact steps can vary slightly. Here’s a general guide:
- Open the test site in your web browser. Make sure you’re using a modern browser like Chrome, Firefox, or Edge.
- Disable any browser extensions that might affect rendering, such as hardware acceleration or night light modes.
- Look for a section that says “Refresh Rate Test” or “Frame Skipping Test.”
- Follow the on-screen instructions. For the refresh rate test, you’ll typically see a moving pattern and a slider. Adjust the slider until the pattern appears to move smoothly without stuttering.
- The site will then display the refresh rate it detected.
Common Problems and Misconceptions
One common misconception is that a refresh rate test site can tell you the maximum refresh rate your monitor supports. It cannot. It only tells you the current setting. If your monitor is capable of 144 Hz but is set to 60 Hz, the site will show 60 Hz.
Another issue is that these tests are not always accurate. They rely on your eyes and the browser’s rendering. Browser limitations, such as vsync or frame pacing, can interfere. Also, if you have multiple monitors with different refresh rates, the site might not detect the correct one if the browser window is not fully on the target display.
Frame skipping tests can also give false positives if your system is under heavy load or if the browser is not using hardware acceleration.
How to Check Your Refresh Rate in Your OS
While online sites are convenient, the most reliable way to check your current refresh rate is through your operating system’s display settings. Here’s how:
- Windows 10/11: Right-click on the desktop and select “Display settings.” Scroll down and click “Advanced display settings.” Under “Choose a display,” select your monitor. The refresh rate will be listed under “Refresh rate.”
- macOS: Click the Apple menu, go to “System Settings,” then “Displays.” Hold down the Option key and click “Scaled” to see a list of refresh rates. The current one will be checked.
- Linux (GNOME): Open “Settings,” go to “Displays.” The refresh rate is shown in the resolution dropdown menu.
Refresh Rate vs. Frame Rate
It’s easy to confuse refresh rate (Hz) with frame rate (fps), but they are different. Refresh rate is how often your monitor updates the image. Frame rate is how many frames your graphics card produces per second. For a smooth experience, you want your frame rate to be at or below your refresh rate. If your frame rate is higher, you may experience screen tearing. If it’s lower, you may see stuttering.
For example, a 144 Hz monitor can display up to 144 frames per second. If your graphics card is only producing 60 fps, the monitor will display each frame for roughly 2.4 refresh cycles, which can look less smooth than a native 60 Hz display.
Choosing a Refresh Rate Test Site
There are several popular refresh rate test sites, but they all work similarly. Some are more feature-rich, offering tests for response time, input lag, and screen uniformity. When choosing a site, look for one that:
- Is free and doesn’t require registration.
- Works in your browser without plugins.
- Offers both a refresh rate test and a frame skipping test.
- Has clear instructions.
Be cautious of sites that ask for permissions or try to install software. A legitimate test site should run entirely in your browser.
Frequently Asked Questions
Can I use a refresh rate test site to overclock my monitor?
No. Refresh rate test sites are for testing and verification, not for changing settings. Overclocking a monitor involves creating a custom resolution with a higher refresh rate in your graphics card control panel (e.g., NVIDIA Control Panel or AMD Radeon Software). This is done at your own risk, as it can potentially damage the monitor.
Why does my monitor say 60 Hz but the site says 59.94 Hz?
This is normal. The difference is due to the NTSC color encoding standard, which uses a refresh rate of 59.94 Hz instead of 60 Hz. Many monitors and graphics cards will report this as 60 Hz, but the actual signal is 59.94 Hz. The test site is picking up the exact frequency.
My monitor is 144 Hz, but the site shows 60 Hz. What’s wrong?
Your monitor is likely not set to 144 Hz in your operating system’s display settings. Check the display settings as described above and change the refresh rate to 144 Hz. Also, ensure you’re using a cable that supports 144 Hz, such as DisplayPort or HDMI 2.0 or later. Older HDMI cables may not support the bandwidth needed.
Are refresh rate test sites accurate?
They are reasonably accurate for determining the current refresh rate, but they are not laboratory instruments. The accuracy depends on your browser, your system’s performance, and your ability to visually match the patterns. For a definitive answer, check your OS display settings.
Can a refresh rate test site fix screen tearing?
No. Screen tearing is caused by a mismatch between the frame rate and refresh rate. To fix it, you should enable V-Sync (vertical sync) in your games or graphics card settings, or use a technology like FreeSync or G-Sync if your monitor and graphics card support it. A test site can only help you identify the issue, not fix it.
Related
Formula used
in hz | Detected refresh rate | Hz | 60 | 0 out fps | Frames per second | fps | hz | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.