Make a Boat Codes: Hull ID & Registration Explained
Boat codes are not a single thing: they are the Hull Identification Number (HIN) that every boat is assigned at the factory, and the state registration number that is displayed on the hull. This article explains what each code is, where to find them, how to read them, and how to get a new HIN if yours is missing.
What Is a Hull Identification Number (HIN)?
A HIN is a 12-character code that is permanently affixed to the hull of a boat, much like a car’s VIN. It was introduced in the United States in 1972 and is required on all boats manufactured or imported for sale in the U.S. The HIN is used for registration, titling, and theft recovery. It is also required for boat loans and insurance.
The HIN is not the same as the state registration number (often called the “CF number” in California or “registration number” in other states). The registration number is issued by the state and changes when you move or re-register the boat. The HIN stays with the boat for its entire life.
How to Read a HIN
The 12-character HIN is broken into three parts:
- First 3 characters: Manufacturer’s Identification Code (MIC) – assigned by the U.S. Coast Guard. Example: “ABC” might stand for a specific builder.
- Next 5 characters: The boat’s serial number – assigned by the manufacturer. This can be letters and numbers, but not I, O, or Q to avoid confusion with 1 and 0.
- Last 4 characters: The model year and month of production. The first of these four is the model year (e.g., 2023 = “3” for the last digit), the next is the month (A=January, B=February, etc.), and the last two are the year of certification (e.g., “23” for 2023).
For example, a HIN like “ABC12345E223” would mean: manufacturer ABC, serial 12345, model year 2022 (the “2”), built in May (“E”), and certified in 2023 (“23”).
Where to Find the HIN on Your Boat
The Coast Guard requires two HINs on boats built after 1984: one on the starboard (right) side of the transom, and a second hidden or less visible location. On boats built before 1984, only one is required, usually on the transom or on the starboard side of the hull near the stern.
Common places to look:
- On the transom, within 2 inches of the top, on the starboard side.
- On the starboard side of the hull, within 1 foot of the stern.
- Under a gunwale or on a structural member inside the boat (for the second HIN).
- On the engine bracket or on a metal plate if the transom has been replaced.
If the HIN is not visible, check the boat’s title, registration papers, or insurance documents – they should list the HIN.
How to Get a New HIN If It’s Missing
If your boat has no HIN (for example, it’s a home-built boat or the transom was replaced), you cannot simply invent one. You must apply for a new HIN from your state’s boating agency (often the Department of Motor Vehicles, Department of Natural Resources, or Fish and Wildlife). The process varies by state, but generally:
- Contact your state’s boating authority and ask for a HIN assignment application.
- Provide proof of ownership (bill of sale, title, or registration).
- If the boat is home-built, you may need to provide a notarized statement of construction.
- Pay a fee (often $20–$50).
- The state will issue a new HIN, which you must affix to the boat permanently.
Do not attempt to stamp or engrave your own HIN – that is illegal and can cause problems with registration and law enforcement.
Registration Numbers: The Other Code on Your Boat
In addition to the HIN, most boats must display a state registration number. This is the code that looks like “CA 1234 AB” or “FL 5678 CD”. It is issued by the state where the boat is principally used. The registration number must be displayed on the forward half of the boat, on both sides, in block letters at least 3 inches high, and must contrast with the hull color.
Registration numbers are not permanent – they change when you move to a new state or when the registration is renewed (some states issue new numbers, others keep the same). The registration number is tied to the boat’s HIN, so law enforcement can look up the HIN to find the owner.
Common Mistakes and Misconceptions
Here are a few things that confuse boat owners:
- Confusing HIN with registration number: They are different. The HIN is a 12-character code from the factory; the registration number is a state-issued code with letters and numbers.
- Thinking the HIN is the same as the serial number on the engine: The engine has its own serial number, which is not the HIN.
- Assuming the HIN is on the title: The title lists the HIN, but the physical HIN on the boat is what law enforcement checks.
- Using a homemade HIN: If you build a boat, you cannot make up a HIN – you must get one from the state.
Frequently Asked Questions
Can I change my boat’s HIN?
No. The HIN is a permanent identifier. If it is damaged or illegible, you must have the state issue a replacement HIN, which is then affixed to the boat. You cannot alter the original HIN.
What if my boat was built before 1972?
Boats built before 1972 do not have a HIN from the factory. If you need one for registration, your state will assign a new HIN, often starting with a state code (e.g., “US” for undocumented vessels).
How do I find the manufacturer from a HIN?
The first three characters are the MIC. You can search the U.S. Coast Guard’s MIC database online to find the manufacturer’s name and address.
Is the HIN the same as the boat’s serial number?
No. The HIN includes a serial number, but the HIN is a unique 12-character code that also encodes the manufacturer and year. The serial number alone is not unique across manufacturers.
Do I need a HIN for a kayak or canoe?
In most states, kayaks and canoes are not required to have a HIN unless they have a motor. However, if you register a kayak or canoe, the state may assign a HIN for identification.